configs: Resync with savedefconfig
[platform/kernel/u-boot.git] / configs / corvus_defconfig
1 CONFIG_ARM=y
2 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
3 # CONFIG_SPL_USE_ARCH_MEMSET is not set
4 CONFIG_ARCH_AT91=y
5 CONFIG_SYS_TEXT_BASE=0x72000000
6 CONFIG_TARGET_CORVUS=y
7 CONFIG_SPL_GPIO_SUPPORT=y
8 CONFIG_SPL_LIBCOMMON_SUPPORT=y
9 CONFIG_SPL_LIBGENERIC_SUPPORT=y
10 CONFIG_SYS_MALLOC_F_LEN=0x800
11 CONFIG_SPL_SERIAL_SUPPORT=y
12 CONFIG_SPL=y
13 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
14 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
15 CONFIG_BOOTDELAY=3
16 CONFIG_USE_BOOTARGS=y
17 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
18 # CONFIG_DISPLAY_BOARDINFO is not set
19 CONFIG_BOARD_EARLY_INIT_F=y
20 CONFIG_SPL_NAND_SUPPORT=y
21 CONFIG_HUSH_PARSER=y
22 CONFIG_SYS_PROMPT="U-Boot> "
23 # CONFIG_CMD_BDI is not set
24 CONFIG_CMD_BOOTZ=y
25 # CONFIG_CMD_IMI is not set
26 CONFIG_CMD_DFU=y
27 CONFIG_CMD_GPIO=y
28 # CONFIG_CMD_LOADS is not set
29 CONFIG_CMD_NAND=y
30 CONFIG_CMD_USB=y
31 # CONFIG_CMD_SOURCE is not set
32 # CONFIG_CMD_SETEXPR is not set
33 CONFIG_CMD_DHCP=y
34 CONFIG_CMD_PING=y
35 CONFIG_CMD_MTDPARTS=y
36 CONFIG_OF_CONTROL=y
37 CONFIG_OF_EMBED=y
38 CONFIG_ENV_IS_IN_NAND=y
39 CONFIG_CLK=y
40 CONFIG_CLK_AT91=y
41 CONFIG_DFU_NAND=y
42 # CONFIG_MMC is not set
43 CONFIG_MTD_PARTITIONS=y
44 CONFIG_NAND=y
45 CONFIG_NAND_ATMEL=y
46 CONFIG_PHYLIB=y
47 CONFIG_ATMEL_USART=y
48 CONFIG_USB=y
49 CONFIG_USB_EHCI_HCD=y
50 CONFIG_USB_STORAGE=y
51 CONFIG_USB_GADGET=y
52 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
53 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
54 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
55 CONFIG_USB_GADGET_ATMEL_USBA=y
56 CONFIG_USB_GADGET_DOWNLOAD=y
57 # CONFIG_EFI_LOADER is not set