Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOG
[platform/kernel/u-boot.git] / configs / cm_t335_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_CPU_INIT=y
3 CONFIG_ARCH_OMAP2PLUS=y
4 CONFIG_SPL_GPIO_SUPPORT=y
5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_ENV_SIZE=0x4000
8 CONFIG_ENV_OFFSET=0x300000
9 CONFIG_AM33XX=y
10 CONFIG_TARGET_CM_T335=y
11 CONFIG_SPL_MMC_SUPPORT=y
12 CONFIG_SPL_SERIAL_SUPPORT=y
13 CONFIG_SPL=y
14 CONFIG_SPL_FS_FAT=y
15 CONFIG_SPL_LIBDISK_SUPPORT=y
16 CONFIG_DISTRO_DEFAULTS=y
17 # CONFIG_USE_BOOTCOMMAND is not set
18 CONFIG_SYS_CONSOLE_INFO_QUIET=y
19 CONFIG_SPL_FS_EXT4=y
20 CONFIG_SPL_I2C_SUPPORT=y
21 CONFIG_SPL_MTD_SUPPORT=y
22 CONFIG_SPL_NAND_DRIVERS=y
23 CONFIG_SPL_NAND_ECC=y
24 CONFIG_SPL_NAND_BASE=y
25 CONFIG_SPL_POWER=y
26 CONFIG_SPL_WATCHDOG=y
27 # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
28 CONFIG_SYS_PROMPT="CM-T335 # "
29 CONFIG_CMD_ASKENV=y
30 CONFIG_CMD_EEPROM=y
31 CONFIG_CMD_EEPROM_LAYOUT=y
32 CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3"
33 # CONFIG_CMD_FLASH is not set
34 CONFIG_CMD_GPIO=y
35 CONFIG_CMD_I2C=y
36 CONFIG_CMD_MMC=y
37 CONFIG_CMD_NAND=y
38 # CONFIG_CMD_SETEXPR is not set
39 CONFIG_BOOTP_DNS2=y
40 CONFIG_CMD_EXT4_WRITE=y
41 CONFIG_CMD_MTDPARTS=y
42 CONFIG_MTDIDS_DEFAULT="nand0=nand"
43 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:2m(spl),1m(u-boot),1m(u-boot-env),1m(dtb),4m(splash),6m(kernel),-(rootfs)"
44 CONFIG_ENV_OVERWRITE=y
45 CONFIG_ENV_IS_IN_NAND=y
46 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
47 CONFIG_VERSION_VARIABLE=y
48 CONFIG_BOOTP_SEND_HOSTNAME=y
49 CONFIG_CMD_PCA953X=y
50 CONFIG_LED_STATUS=y
51 CONFIG_LED_STATUS_GPIO=y
52 CONFIG_LED_STATUS0=y
53 CONFIG_LED_STATUS_BIT=64
54 CONFIG_LED_STATUS_BOOT_ENABLE=y
55 CONFIG_LED_STATUS_BOOT=0
56 CONFIG_MMC_OMAP_HS=y
57 CONFIG_MTD=y
58 CONFIG_MTD_RAW_NAND=y
59 CONFIG_PHY_ATHEROS=y
60 CONFIG_MII=y
61 CONFIG_DRIVER_TI_CPSW=y
62 CONFIG_OF_LIBFDT=y