configs/brppt2_defconfig

   1 CONFIG_ARM=y
   2 # CONFIG_SPL_SYS_THUMB_BUILD is not set
   3 CONFIG_SYS_L2CACHE_OFF=y
   4 CONFIG_ARCH_MX6=y
   5 CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
   6 CONFIG_SYS_TEXT_BASE=0x17800000
   7 CONFIG_SPL_GPIO_SUPPORT=y
   8 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   9 CONFIG_SPL_LIBGENERIC_SUPPORT=y
  10 CONFIG_SYS_MALLOC_F_LEN=0x1000
  11 CONFIG_TARGET_BRPPT2=y
  12 CONFIG_SPL_SERIAL_SUPPORT=y
  13 CONFIG_ENV_SIZE=0x10000
  14 CONFIG_ENV_OFFSET=0x20000
  15 CONFIG_NR_DRAM_BANKS=1
  16 CONFIG_SPL=y
  17 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
  18 CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
  19 CONFIG_ENV_SECT_SIZE=0x10000
  20 CONFIG_SPL_SPI_FLASH_SUPPORT=y
  21 CONFIG_SPL_SPI_SUPPORT=y
  22 # CONFIG_CMD_BMODE is not set
  23 # CONFIG_EXPERT is not set
  24 CONFIG_OF_BOARD_SETUP=y
  25 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
  26 CONFIG_SPI_BOOT=y
  27 CONFIG_BOOTDELAY=0
  28 CONFIG_USE_BOOTCOMMAND=y
  29 CONFIG_BOOTCOMMAND="run b_default"
  30 CONFIG_VERSION_VARIABLE=y
  31 CONFIG_BOARD_EARLY_INIT_F=y
  32 CONFIG_SPL_BOARD_INIT=y
  33 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
  34 CONFIG_SPL_I2C_SUPPORT=y
  35 CONFIG_SPL_SPI_LOAD=y
  36 CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
  37 CONFIG_HUSH_PARSER=y
  38 CONFIG_CMD_BOOTZ=y
  39 # CONFIG_CMD_ELF is not set
  40 # CONFIG_CMD_IMI is not set
  41 # CONFIG_CMD_XIMG is not set
  42 # CONFIG_CMD_ENV_EXISTS is not set
  43 CONFIG_CMD_MEMINFO=y
  44 # CONFIG_CMD_FLASH is not set
  45 CONFIG_CMD_GPIO=y
  46 CONFIG_CMD_I2C=y
  47 # CONFIG_CMD_LOADB is not set
  48 # CONFIG_CMD_LOADS is not set
  49 CONFIG_CMD_MMC=y
  50 CONFIG_CMD_USB=y
  51 CONFIG_CMD_DHCP=y
  52 # CONFIG_CMD_NFS is not set
  53 CONFIG_CMD_MII=y
  54 CONFIG_CMD_CACHE=y
  55 CONFIG_CMD_TIME=y
  56 CONFIG_CMD_EXT4=y
  57 CONFIG_CMD_EXT4_WRITE=y
  58 CONFIG_CMD_FAT=y
  59 CONFIG_CMD_FS_GENERIC=y
  60 CONFIG_DEFAULT_DEVICE_TREE="imx6dl-brppt2"
  61 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupts dmas dma-names"
  62 CONFIG_ENV_IS_IN_SPI_FLASH=y
  63 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  64 CONFIG_NET_RANDOM_ETHADDR=y
  65 # CONFIG_DM_DEVICE_REMOVE is not set
  66 CONFIG_SPL_DM_SEQ_ALIAS=y
  67 # CONFIG_OF_TRANSLATE is not set
  68 # CONFIG_SPL_BLK is not set
  69 CONFIG_BOOTCOUNT_LIMIT=y
  70 CONFIG_SYS_I2C_MXC=y
  71 CONFIG_MMC_BROKEN_CD=y
  72 # CONFIG_SPL_DM_MMC is not set
  73 CONFIG_FSL_ESDHC=y
  74 CONFIG_MTD=y
  75 CONFIG_DM_SPI_FLASH=y
  76 CONFIG_SPI_FLASH_STMICRO=y
  77 CONFIG_SPI_FLASH_WINBOND=y
  78 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  79 CONFIG_PHYLIB=y
  80 CONFIG_PHY_FIXED=y
  81 CONFIG_FEC_MXC=y
  82 CONFIG_DM_REGULATOR=y
  83 CONFIG_DM_REGULATOR_FIXED=y
  84 CONFIG_DM_REGULATOR_GPIO=y
  85 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
  86 CONFIG_DM_SERIAL=y
  87 CONFIG_MXC_UART=y
  88 CONFIG_SPI=y
  89 CONFIG_DM_SPI=y
  90 CONFIG_MXC_SPI=y
  91 CONFIG_USB=y
  92 CONFIG_DM_USB=y
  93 CONFIG_USB_STORAGE=y
  94 CONFIG_SPL_TINY_MEMSET=y
  95 # CONFIG_EFI_LOADER is not set