Merge branch '2020-04-27-master-imports'
[platform/kernel/u-boot.git] / configs / brppt1_nand_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_OMAP2PLUS=y
3 CONFIG_SPL_GPIO_SUPPORT=y
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_SYS_MALLOC_F_LEN=0x2000
7 CONFIG_ENV_SIZE=0x10000
8 CONFIG_ENV_OFFSET=0x60000
9 CONFIG_DM_GPIO=y
10 CONFIG_AM33XX=y
11 CONFIG_TARGET_BRPPT1=y
12 CONFIG_SPL_SERIAL_SUPPORT=y
13 CONFIG_NR_DRAM_BANKS=1
14 CONFIG_SPL=y
15 # CONFIG_EXPERT is not set
16 # CONFIG_FIT is not set
17 CONFIG_OF_BOARD_SETUP=y
18 CONFIG_BOOTDELAY=0
19 CONFIG_USE_BOOTCOMMAND=y
20 CONFIG_BOOTCOMMAND="run b_default"
21 CONFIG_USE_PREBOOT=y
22 CONFIG_PREBOOT="run cfgscr; run brdefaultip"
23 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
24 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
25 CONFIG_SYS_CONSOLE_INFO_QUIET=y
26 CONFIG_VERSION_VARIABLE=y
27 # CONFIG_DISPLAY_CPUINFO is not set
28 # CONFIG_DISPLAY_BOARDINFO is not set
29 CONFIG_ARCH_MISC_INIT=y
30 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
31 CONFIG_SPL_SEPARATE_BSS=y
32 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
33 CONFIG_SPL_I2C_SUPPORT=y
34 CONFIG_SPL_POWER_SUPPORT=y
35 CONFIG_SPL_WATCHDOG_SUPPORT=y
36 CONFIG_SPL_YMODEM_SUPPORT=y
37 CONFIG_HUSH_PARSER=y
38 CONFIG_CMD_BOOTZ=y
39 # CONFIG_CMD_IMI is not set
40 # CONFIG_CMD_XIMG is not set
41 # CONFIG_CMD_EDITENV is not set
42 # CONFIG_CMD_CRC32 is not set
43 # CONFIG_CMD_FLASH is not set
44 CONFIG_CMD_GPIO=y
45 CONFIG_CMD_I2C=y
46 # CONFIG_CMD_LOADS is not set
47 CONFIG_CMD_NAND=y
48 CONFIG_CMD_PART=y
49 CONFIG_CMD_USB=y
50 # CONFIG_CMD_ITEST is not set
51 CONFIG_CMD_DHCP=y
52 # CONFIG_CMD_NFS is not set
53 CONFIG_CMD_MII=y
54 CONFIG_CMD_PING=y
55 CONFIG_CMD_BOOTCOUNT=y
56 CONFIG_CMD_CACHE=y
57 CONFIG_CMD_TIME=y
58 CONFIG_CMD_EXT4=y
59 CONFIG_CMD_EXT4_WRITE=y
60 CONFIG_CMD_FAT=y
61 CONFIG_CMD_FS_GENERIC=y
62 CONFIG_CMD_MTDPARTS=y
63 CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
64 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(MLO),128k(cfgscr),128k(dtb),128k(u-boot-env),512k(u-boot),4m(kernel),128m(rootfs),-(user)"
65 # CONFIG_SPL_DOS_PARTITION is not set
66 CONFIG_OF_CONTROL=y
67 CONFIG_SPL_OF_CONTROL=y
68 CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-nand"
69 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
70 CONFIG_ENV_IS_IN_NAND=y
71 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
72 CONFIG_NET_RANDOM_ETHADDR=y
73 CONFIG_DM=y
74 CONFIG_SPL_DM=y
75 CONFIG_SPL_DM_SEQ_ALIAS=y
76 # CONFIG_OF_TRANSLATE is not set
77 CONFIG_BLK=y
78 CONFIG_BOOTCOUNT_LIMIT=y
79 CONFIG_DM_I2C=y
80 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
81 CONFIG_MISC=y
82 # CONFIG_MMC is not set
83 CONFIG_MTD=y
84 CONFIG_MTD_RAW_NAND=y
85 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
86 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
87 CONFIG_PHY_NATSEMI=y
88 CONFIG_DM_ETH=y
89 CONFIG_DRIVER_TI_CPSW=y
90 CONFIG_DM_SERIAL=y
91 CONFIG_USB=y
92 CONFIG_DM_USB=y
93 CONFIG_USB_MUSB_HOST=y
94 CONFIG_USB_MUSB_GADGET=y
95 CONFIG_USB_MUSB_TI=y
96 CONFIG_USB_STORAGE=y
97 CONFIG_USB_GADGET=y
98 CONFIG_FAT_WRITE=y
99 CONFIG_LZO=y
100 # CONFIG_OF_LIBFDT_OVERLAY is not set
101 # CONFIG_EFI_LOADER is not set