Merge tag 'pull-12apr19' of git://git.denx.de/u-boot-dm
[platform/kernel/u-boot.git] / configs / brppt1_nand_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_OMAP2PLUS=y
3 CONFIG_SPL_GPIO_SUPPORT=y
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_SYS_MALLOC_F_LEN=0x2000
7 CONFIG_AM33XX=y
8 CONFIG_TARGET_BRPPT1=y
9 CONFIG_SPL_SERIAL_SUPPORT=y
10 CONFIG_SPL=y
11 CONFIG_NR_DRAM_BANKS=1
12 CONFIG_TPL_SYS_MALLOC_F_LEN=0x0
13 # CONFIG_EXPERT is not set
14 # CONFIG_FIT is not set
15 CONFIG_OF_BOARD_SETUP=y
16 CONFIG_BOOTDELAY=0
17 CONFIG_USE_BOOTCOMMAND=y
18 CONFIG_BOOTCOMMAND="run b_default"
19 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
20 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
21 CONFIG_SYS_CONSOLE_INFO_QUIET=y
22 CONFIG_VERSION_VARIABLE=y
23 # CONFIG_DISPLAY_CPUINFO is not set
24 # CONFIG_DISPLAY_BOARDINFO is not set
25 CONFIG_ARCH_MISC_INIT=y
26 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
27 CONFIG_SPL_SEPARATE_BSS=y
28 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
29 CONFIG_SPL_I2C_SUPPORT=y
30 CONFIG_SPL_POWER_SUPPORT=y
31 CONFIG_SPL_WATCHDOG_SUPPORT=y
32 CONFIG_SPL_YMODEM_SUPPORT=y
33 CONFIG_HUSH_PARSER=y
34 CONFIG_CMD_BOOTZ=y
35 # CONFIG_CMD_IMI is not set
36 # CONFIG_CMD_XIMG is not set
37 # CONFIG_CMD_EDITENV is not set
38 # CONFIG_CMD_CRC32 is not set
39 # CONFIG_CMD_FLASH is not set
40 CONFIG_CMD_GPIO=y
41 CONFIG_CMD_I2C=y
42 # CONFIG_CMD_LOADS is not set
43 CONFIG_CMD_NAND=y
44 CONFIG_CMD_PART=y
45 CONFIG_CMD_USB=y
46 # CONFIG_CMD_ITEST is not set
47 CONFIG_CMD_DHCP=y
48 # CONFIG_CMD_NFS is not set
49 CONFIG_CMD_MII=y
50 CONFIG_CMD_PING=y
51 CONFIG_CMD_BOOTCOUNT=y
52 CONFIG_CMD_CACHE=y
53 CONFIG_CMD_TIME=y
54 CONFIG_CMD_EXT4=y
55 CONFIG_CMD_EXT4_WRITE=y
56 CONFIG_CMD_FAT=y
57 CONFIG_CMD_FS_GENERIC=y
58 CONFIG_CMD_MTDPARTS=y
59 CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
60 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(MLO),128k(cfgscr),128k(dtb),128k(u-boot-env),512k(u-boot),4m(kernel),128m(rootfs),-(user)"
61 # CONFIG_SPL_DOS_PARTITION is not set
62 CONFIG_OF_CONTROL=y
63 CONFIG_SPL_OF_CONTROL=y
64 CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-nand"
65 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
66 CONFIG_ENV_IS_IN_NAND=y
67 CONFIG_NET_RANDOM_ETHADDR=y
68 CONFIG_DM=y
69 CONFIG_SPL_DM=y
70 CONFIG_SPL_DM_SEQ_ALIAS=y
71 # CONFIG_OF_TRANSLATE is not set
72 CONFIG_BLK=y
73 CONFIG_BOOTCOUNT_LIMIT=y
74 CONFIG_DM_GPIO=y
75 CONFIG_DM_I2C=y
76 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
77 CONFIG_MISC=y
78 # CONFIG_MMC is not set
79 CONFIG_NAND=y
80 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
81 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
82 CONFIG_PHY_NATSEMI=y
83 CONFIG_DM_ETH=y
84 CONFIG_DRIVER_TI_CPSW=y
85 CONFIG_DM_SERIAL=y
86 CONFIG_USB=y
87 CONFIG_DM_USB=y
88 CONFIG_USB_MUSB_HOST=y
89 CONFIG_USB_MUSB_GADGET=y
90 CONFIG_USB_MUSB_TI=y
91 CONFIG_USB_MUSB_DSPS=y
92 CONFIG_USB_STORAGE=y
93 CONFIG_USB_GADGET=y
94 CONFIG_FAT_WRITE=y
95 CONFIG_LZO=y
96 # CONFIG_OF_LIBFDT_OVERLAY is not set
97 # CONFIG_EFI_LOADER is not set