x86: conga-qeval20-qa3-e3845: Adjust CONFIG_TEXT_BASE
[platform/kernel/u-boot.git] / configs / bk4r1_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_SYS_THUMB_BUILD=y
4 CONFIG_ARCH_VF610=y
5 CONFIG_TEXT_BASE=0x3f401000
6 CONFIG_SYS_MALLOC_LEN=0x402000
7 CONFIG_SYS_MALLOC_F_LEN=0x800
8 CONFIG_NR_DRAM_BANKS=1
9 CONFIG_ENV_SIZE=0x2000
10 CONFIG_ENV_OFFSET=0x200000
11 CONFIG_DM_GPIO=y
12 CONFIG_DEFAULT_DEVICE_TREE="vf610-bk4r1"
13 CONFIG_BOOTCOUNT_BOOTLIMIT=3
14 CONFIG_SYS_BOOTCOUNT_ADDR=0x4006e02c
15 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
16 CONFIG_ENV_OFFSET_REDUND=0x220000
17 CONFIG_TARGET_BK4R1=y
18 CONFIG_SYS_LOAD_ADDR=0x82000000
19 CONFIG_SYS_MEMTEST_START=0x80010000
20 CONFIG_SYS_MEMTEST_END=0x87c00000
21 CONFIG_HAS_BOARD_SIZE_LIMIT=y
22 CONFIG_BOARD_SIZE_LIMIT=520192
23 CONFIG_FIT=y
24 CONFIG_BOOTDELAY=3
25 CONFIG_AUTOBOOT_KEYED=y
26 CONFIG_AUTOBOOT_PROMPT="Enter passphrase to stop autoboot, booting in %d seconds\n"
27 CONFIG_AUTOBOOT_STOP_STR="123"
28 CONFIG_USE_BOOTCOMMAND=y
29 CONFIG_BOOTCOMMAND="run set_gpio122; run set_gpio96; sf probe; run manage_userdata; run bootcmd_nand"
30 CONFIG_USE_PREBOOT=y
31 CONFIG_BOARD_EARLY_INIT_F=y
32 CONFIG_HUSH_PARSER=y
33 CONFIG_SYS_CBSIZE=256
34 CONFIG_SYS_PBSIZE=276
35 # CONFIG_CMD_ELF is not set
36 CONFIG_CMD_MEMTEST=y
37 CONFIG_CMD_DM=y
38 CONFIG_CMD_FUSE=y
39 CONFIG_CMD_GPIO=y
40 CONFIG_CMD_I2C=y
41 CONFIG_CMD_MMC=y
42 CONFIG_CMD_NAND_TRIMFFS=y
43 CONFIG_CMD_DHCP=y
44 CONFIG_SYS_DISABLE_AUTOLOAD=y
45 CONFIG_CMD_MII=y
46 CONFIG_CMD_PING=y
47 CONFIG_CMD_BOOTCOUNT=y
48 CONFIG_CMD_FAT=y
49 CONFIG_MTDIDS_DEFAULT="nand0=vf610_nfc,nor0=NOR"
50 CONFIG_MTDPARTS_DEFAULT="mtdparts=vf610_nfc:2048k(bootloader),128k(env1),128k(env2),10240k(initrd),40960k(dtbkernel),-(system);NOR:-(nor)"
51 CONFIG_CMD_UBI=y
52 CONFIG_OF_CONTROL=y
53 CONFIG_ENV_OVERWRITE=y
54 CONFIG_ENV_IS_IN_NAND=y
55 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
56 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
57 CONFIG_ARP_TIMEOUT=500
58 CONFIG_NETCONSOLE=y
59 CONFIG_BOOTCOUNT_LIMIT=y
60 CONFIG_VYBRID_GPIO=y
61 CONFIG_DM_I2C=y
62 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
63 CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
64 CONFIG_SYS_I2C_MXC=y
65 CONFIG_LED=y
66 CONFIG_LED_GPIO=y
67 CONFIG_MISC=y
68 CONFIG_I2C_EEPROM=y
69 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
70 CONFIG_FSL_ESDHC_IMX=y
71 CONFIG_MTD=y
72 CONFIG_DM_MTD=y
73 CONFIG_NAND_VF610_NFC=y
74 CONFIG_NAND_VF610_NFC_DT=y
75 CONFIG_SYS_NAND_ONFI_DETECTION=y
76 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
77 CONFIG_DM_SPI_FLASH=y
78 CONFIG_SPI_FLASH_STMICRO=y
79 CONFIG_SPI_FLASH_MTD=y
80 CONFIG_PHYLIB=y
81 CONFIG_PHY_MICREL=y
82 CONFIG_PHY_MICREL_KSZ8XXX=y
83 CONFIG_FEC_MXC=y
84 CONFIG_MII=y
85 CONFIG_PINCTRL=y
86 CONFIG_PINCTRL_VYBRID=y
87 CONFIG_DM_RTC=y
88 CONFIG_RTC_M41T62=y
89 CONFIG_DM_SERIAL=y
90 CONFIG_FSL_LPUART=y
91 CONFIG_SPI=y
92 CONFIG_DM_SPI=y
93 CONFIG_FSL_QSPI=y
94 # CONFIG_EFI_LOADER is not set