configs/axm_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SPL_SYS_THUMB_BUILD=y
   3 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
   4 # CONFIG_SPL_USE_ARCH_MEMSET is not set
   5 CONFIG_ARCH_AT91=y
   6 CONFIG_TARGET_TAURUS=y
   7 CONFIG_SPL_GPIO_SUPPORT=y
   8 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   9 CONFIG_SPL_LIBGENERIC_SUPPORT=y
  10 CONFIG_SPL_SERIAL_SUPPORT=y
  11 CONFIG_SPL_NAND_SUPPORT=y
  12 CONFIG_SPL_SPI_FLASH_SUPPORT=y
  13 CONFIG_SPL_SPI_SUPPORT=y
  14 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
  15 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM"
  16 CONFIG_ENV_IS_IN_NAND=y
  17 CONFIG_BOOTDELAY=3
  18 CONFIG_USE_BOOTARGS=y
  19 CONFIG_BOOTARGS="\0addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}::off\0addtest=setenv bootargs ${bootargs} loglevel=4 test\0baudrate=115200\0boot_file=setenv bootfile /${project_dir}/kernel/uImage\0boot_retries=0\0bootcmd=run flash_self\0bootdelay=3\0ethact=macb0\0flash_nfs=run nand_kernel;run nfsargs;run addip;upgrade_available;bootm ${kernel_ram};reset\0flash_self=run nand_kernel;run setbootargs;upgrade_available;bootm ${kernel_ram};reset\0flash_self_test=run nand_kernel;run setbootargs addtest; upgrade_available;bootm ${kernel_ram};reset\0hostname=systemone\0kernel_Off=0x00200000\0kernel_Off_fallback=0x03800000\0kernel_ram=0x21500000\0kernel_size=0x00400000\0kernel_size_fallback=0x00400000\0loads_echo=1\0nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} ${kernel_size}\0net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};run nfsargs;run addip;upgrade_available;bootm ${kernel_ram};reset\0netdev=eth0\0nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs rw nfsroot=${serverip}:${rootpath} at91sam9_wdt.wdt_timeout=16\0partitionset_active=A\0preboot=echo;echo Type 'run flash_self' to use kernel and root filesystem on memory;echo Type 'run flash_nfs' to use kernel from memory and root filesystem over NFS;echo Type 'run net_nfs' to get Kernel over TFTP and mount root filesystem over NFS;echo\0project_dir=systemone\0root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0rootfs=/dev/mtdblock5\0rootfs_fallback=/dev/mtdblock7\0setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops root=${rootfs} rootfstype=jffs2 panic=7 at91sam9_wdt.wdt_timeout=16\0stderr=serial\0stdin=serial\0stdout=serial\0upgrade_available=0\0"
  20 # CONFIG_DISPLAY_BOARDINFO is not set
  21 CONFIG_BOARD_EARLY_INIT_F=y
  22 CONFIG_SPL=y
  23 CONFIG_HUSH_PARSER=y
  24 # CONFIG_CMD_BDI is not set
  25 CONFIG_CMD_BOOTZ=y
  26 # CONFIG_CMD_IMI is not set
  27 # CONFIG_CMD_IMLS is not set
  28 # CONFIG_CMD_FPGA is not set
  29 # CONFIG_CMD_LOADS is not set
  30 CONFIG_CMD_NAND=y
  31 CONFIG_CMD_SF=y
  32 CONFIG_CMD_SPI=y
  33 # CONFIG_CMD_SOURCE is not set
  34 # CONFIG_CMD_SETEXPR is not set
  35 CONFIG_CMD_DHCP=y
  36 CONFIG_CMD_PING=y
  37 CONFIG_OF_CONTROL=y
  38 CONFIG_OF_EMBED=y
  39 # CONFIG_MMC is not set
  40 CONFIG_SPI_FLASH=y
  41 CONFIG_SPI_FLASH_STMICRO=y
  42 CONFIG_PHYLIB=y
  43 CONFIG_USE_TINY_PRINTF=y