binman: Update fit to move node reading into the ReadNode() method
[platform/kernel/u-boot.git] / configs / at91sam9x5ek_spiflash_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_ARCH_AT91=y
4 CONFIG_SYS_TEXT_BASE=0x26f00000
5 CONFIG_SYS_MALLOC_LEN=0x81000
6 CONFIG_SYS_MALLOC_F_LEN=0x2000
7 CONFIG_TARGET_AT91SAM9X5EK=y
8 CONFIG_NR_DRAM_BANKS=1
9 CONFIG_ENV_SIZE=0x3000
10 CONFIG_ENV_OFFSET=0x5000
11 CONFIG_ENV_SECT_SIZE=0x1000
12 CONFIG_DM_GPIO=y
13 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
14 CONFIG_DEBUG_UART_BOARD_INIT=y
15 CONFIG_DEBUG_UART_BASE=0xfffff200
16 CONFIG_DEBUG_UART_CLOCK=132000000
17 CONFIG_DEBUG_UART=y
18 CONFIG_SYS_LOAD_ADDR=0x22000000
19 CONFIG_FIT=y
20 CONFIG_SPI_BOOT=y
21 CONFIG_BOOTDELAY=3
22 CONFIG_USE_BOOTARGS=y
23 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw"
24 CONFIG_USE_BOOTCOMMAND=y
25 CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22000000"
26 # CONFIG_CONSOLE_MUX is not set
27 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
28 # CONFIG_DISPLAY_BOARDINFO is not set
29 CONFIG_HUSH_PARSER=y
30 CONFIG_SYS_PROMPT="U-Boot> "
31 CONFIG_CMD_BOOTZ=y
32 # CONFIG_CMD_FLASH is not set
33 CONFIG_CMD_MMC=y
34 CONFIG_CMD_NAND=y
35 CONFIG_CMD_NAND_TRIMFFS=y
36 CONFIG_CMD_USB=y
37 # CONFIG_CMD_SETEXPR is not set
38 CONFIG_CMD_DHCP=y
39 CONFIG_BOOTP_BOOTFILESIZE=y
40 CONFIG_CMD_PING=y
41 CONFIG_CMD_FAT=y
42 CONFIG_CMD_MTDPARTS=y
43 CONFIG_CMD_UBI=y
44 CONFIG_OF_CONTROL=y
45 CONFIG_ENV_IS_IN_SPI_FLASH=y
46 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
47 CONFIG_DM=y
48 CONFIG_CLK=y
49 CONFIG_CLK_AT91=y
50 CONFIG_AT91_GPIO=y
51 CONFIG_GENERIC_ATMEL_MCI=y
52 CONFIG_MTD=y
53 CONFIG_MTD_RAW_NAND=y
54 CONFIG_NAND_ATMEL=y
55 CONFIG_ATMEL_NAND_HW_PMECC=y
56 CONFIG_DM_SPI_FLASH=y
57 CONFIG_SF_DEFAULT_SPEED=30000000
58 CONFIG_SPI_FLASH_ATMEL=y
59 CONFIG_DM_ETH=y
60 CONFIG_MACB=y
61 CONFIG_PINCTRL=y
62 CONFIG_PINCTRL_AT91=y
63 CONFIG_DM_SERIAL=y
64 CONFIG_DEBUG_UART_ANNOUNCE=y
65 CONFIG_ATMEL_USART=y
66 CONFIG_SPI=y
67 CONFIG_DM_SPI=y
68 CONFIG_TIMER=y
69 CONFIG_ATMEL_PIT_TIMER=y
70 CONFIG_USB=y
71 CONFIG_USB_EHCI_HCD=y
72 CONFIG_USB_STORAGE=y
73 CONFIG_DM_VIDEO=y
74 # CONFIG_VIDEO_BPP8 is not set
75 # CONFIG_VIDEO_BPP32 is not set
76 CONFIG_ATMEL_HLCD=y