kwbimage: Add support for extracting images via dumpimage tool
[platform/kernel/u-boot.git] / configs / at91sam9x5ek_mmc_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_AT91=y
3 CONFIG_SYS_TEXT_BASE=0x26f00000
4 CONFIG_TARGET_AT91SAM9X5EK=y
5 CONFIG_SYS_MALLOC_F_LEN=0x2000
6 CONFIG_NR_DRAM_BANKS=1
7 CONFIG_ENV_SIZE=0x4000
8 CONFIG_DM_GPIO=y
9 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
10 CONFIG_DEBUG_UART_BOARD_INIT=y
11 CONFIG_DEBUG_UART_BASE=0xfffff200
12 CONFIG_DEBUG_UART_CLOCK=132000000
13 CONFIG_DEBUG_UART=y
14 CONFIG_FIT=y
15 CONFIG_SD_BOOT=y
16 CONFIG_BOOTDELAY=3
17 CONFIG_USE_BOOTARGS=y
18 CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
19 # CONFIG_CONSOLE_MUX is not set
20 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
21 # CONFIG_DISPLAY_BOARDINFO is not set
22 CONFIG_HUSH_PARSER=y
23 CONFIG_SYS_PROMPT="U-Boot> "
24 CONFIG_CMD_BOOTZ=y
25 # CONFIG_CMD_FLASH is not set
26 CONFIG_CMD_MMC=y
27 CONFIG_CMD_NAND=y
28 CONFIG_CMD_NAND_TRIMFFS=y
29 CONFIG_CMD_USB=y
30 # CONFIG_CMD_SETEXPR is not set
31 CONFIG_CMD_DHCP=y
32 CONFIG_CMD_PING=y
33 CONFIG_CMD_FAT=y
34 CONFIG_CMD_MTDPARTS=y
35 CONFIG_CMD_UBI=y
36 CONFIG_OF_CONTROL=y
37 CONFIG_ENV_IS_IN_FAT=y
38 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
39 CONFIG_DM=y
40 CONFIG_CLK=y
41 CONFIG_CLK_AT91=y
42 CONFIG_AT91_GPIO=y
43 CONFIG_GENERIC_ATMEL_MCI=y
44 CONFIG_MTD=y
45 CONFIG_MTD_RAW_NAND=y
46 CONFIG_NAND_ATMEL=y
47 CONFIG_ATMEL_NAND_HW_PMECC=y
48 CONFIG_DM_SPI_FLASH=y
49 CONFIG_SF_DEFAULT_SPEED=30000000
50 CONFIG_SPI_FLASH_ATMEL=y
51 CONFIG_DM_ETH=y
52 CONFIG_MACB=y
53 CONFIG_PINCTRL=y
54 CONFIG_PINCTRL_AT91=y
55 CONFIG_DM_SERIAL=y
56 CONFIG_DEBUG_UART_ANNOUNCE=y
57 CONFIG_ATMEL_USART=y
58 CONFIG_SPI=y
59 CONFIG_DM_SPI=y
60 CONFIG_TIMER=y
61 CONFIG_ATMEL_PIT_TIMER=y
62 CONFIG_USB=y
63 CONFIG_USB_EHCI_HCD=y
64 CONFIG_USB_STORAGE=y
65 CONFIG_DM_VIDEO=y
66 # CONFIG_VIDEO_BPP8 is not set
67 # CONFIG_VIDEO_BPP32 is not set
68 CONFIG_ATMEL_HLCD=y