configs/at91sam9rlek_nandflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_CPU_INIT=y
   3 CONFIG_ARCH_AT91=y
   4 CONFIG_SYS_TEXT_BASE=0x21F00000
   5 CONFIG_TARGET_AT91SAM9RLEK=y
   6 CONFIG_SYS_MALLOC_F_LEN=0x2000
   7 CONFIG_NR_DRAM_BANKS=1
   8 CONFIG_DEBUG_UART_BOARD_INIT=y
   9 CONFIG_DEBUG_UART_BASE=0xfffff200
  10 CONFIG_DEBUG_UART_CLOCK=100000000
  11 CONFIG_DEBUG_UART=y
  12 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_NANDFLASH"
  13 CONFIG_BOOTDELAY=3
  14 CONFIG_USE_BOOTARGS=y
  15 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
  16 # CONFIG_CONSOLE_MUX is not set
  17 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  18 # CONFIG_DISPLAY_BOARDINFO is not set
  19 CONFIG_HUSH_PARSER=y
  20 CONFIG_SYS_PROMPT="U-Boot> "
  21 # CONFIG_CMD_BDI is not set
  22 CONFIG_CMD_BOOTZ=y
  23 # CONFIG_CMD_IMI is not set
  24 # CONFIG_CMD_LOADS is not set
  25 CONFIG_CMD_MMC=y
  26 CONFIG_CMD_NAND=y
  27 # CONFIG_CMD_SOURCE is not set
  28 # CONFIG_CMD_SETEXPR is not set
  29 CONFIG_CMD_FAT=y
  30 CONFIG_OF_CONTROL=y
  31 CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
  32 CONFIG_ENV_IS_IN_NAND=y
  33 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  34 CONFIG_ENV_OFFSET_REDUND=0x100000
  35 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  36 # CONFIG_NET is not set
  37 CONFIG_DM=y
  38 CONFIG_CLK=y
  39 CONFIG_CLK_AT91=y
  40 CONFIG_DM_GPIO=y
  41 CONFIG_AT91_GPIO=y
  42 CONFIG_DM_MMC=y
  43 CONFIG_GENERIC_ATMEL_MCI=y
  44 CONFIG_MTD_RAW_NAND=y
  45 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
  46 CONFIG_NAND_ATMEL=y
  47 CONFIG_DM_SPI_FLASH=y
  48 CONFIG_SPI_FLASH_ATMEL=y
  49 CONFIG_SPI_FLASH_DATAFLASH=y
  50 CONFIG_PINCTRL=y
  51 CONFIG_PINCTRL_AT91=y
  52 CONFIG_DM_SERIAL=y
  53 CONFIG_DEBUG_UART_ATMEL=y
  54 CONFIG_DEBUG_UART_ANNOUNCE=y
  55 CONFIG_ATMEL_USART=y
  56 CONFIG_SPI=y
  57 CONFIG_DM_SPI=y
  58 CONFIG_TIMER=y
  59 CONFIG_ATMEL_PIT_TIMER=y
  60 CONFIG_LCD=y
  61 CONFIG_MTD=y