board: freescale: t208xrdb: remove the legacy non-DM_ETH code
[platform/kernel/u-boot.git] / configs / at91sam9rlek_mmc_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_CPU_INIT=y
3 CONFIG_ARCH_AT91=y
4 CONFIG_SYS_TEXT_BASE=0x21F00000
5 CONFIG_TARGET_AT91SAM9RLEK=y
6 CONFIG_SYS_MALLOC_F_LEN=0x2000
7 CONFIG_NR_DRAM_BANKS=1
8 CONFIG_ENV_SIZE=0x4000
9 CONFIG_DM_GPIO=y
10 CONFIG_DEBUG_UART_BOARD_INIT=y
11 CONFIG_DEBUG_UART_BASE=0xfffff200
12 CONFIG_DEBUG_UART_CLOCK=100000000
13 CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
14 CONFIG_DEBUG_UART=y
15 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC"
16 CONFIG_BOOTDELAY=3
17 CONFIG_USE_BOOTARGS=y
18 CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait"
19 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
20 # CONFIG_DISPLAY_BOARDINFO is not set
21 CONFIG_HUSH_PARSER=y
22 CONFIG_SYS_PROMPT="U-Boot> "
23 # CONFIG_CMD_BDI is not set
24 CONFIG_CMD_BOOTZ=y
25 # CONFIG_CMD_IMI is not set
26 # CONFIG_CMD_LOADS is not set
27 CONFIG_CMD_MMC=y
28 CONFIG_CMD_NAND=y
29 # CONFIG_CMD_SOURCE is not set
30 # CONFIG_CMD_SETEXPR is not set
31 CONFIG_CMD_FAT=y
32 CONFIG_OF_CONTROL=y
33 CONFIG_ENV_IS_IN_FAT=y
34 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
35 # CONFIG_NET is not set
36 CONFIG_DM=y
37 CONFIG_CLK=y
38 CONFIG_CLK_AT91=y
39 CONFIG_AT91_GPIO=y
40 CONFIG_GENERIC_ATMEL_MCI=y
41 CONFIG_MTD=y
42 CONFIG_MTD_RAW_NAND=y
43 CONFIG_NAND_ATMEL=y
44 CONFIG_DM_SPI_FLASH=y
45 CONFIG_SPI_FLASH_ATMEL=y
46 CONFIG_SPI_FLASH_DATAFLASH=y
47 CONFIG_PINCTRL=y
48 CONFIG_PINCTRL_AT91=y
49 CONFIG_DM_SERIAL=y
50 CONFIG_DEBUG_UART_ANNOUNCE=y
51 CONFIG_ATMEL_USART=y
52 CONFIG_SPI=y
53 CONFIG_DM_SPI=y
54 CONFIG_TIMER=y
55 CONFIG_ATMEL_PIT_TIMER=y