pico-imx7d: Add fastboot support
[platform/kernel/u-boot.git] / configs / at91sam9rlek_mmc_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_AT91=y
3 CONFIG_SYS_TEXT_BASE=0x21F00000
4 CONFIG_TARGET_AT91SAM9RLEK=y
5 CONFIG_SYS_MALLOC_F_LEN=0x2000
6 CONFIG_DEBUG_UART_BOARD_INIT=y
7 CONFIG_DEBUG_UART_BASE=0xfffff200
8 CONFIG_DEBUG_UART_CLOCK=100000000
9 CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
10 CONFIG_DEBUG_UART=y
11 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC"
12 CONFIG_BOOTDELAY=3
13 CONFIG_USE_BOOTARGS=y
14 CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait"
15 # CONFIG_CONSOLE_MUX is not set
16 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
17 # CONFIG_DISPLAY_BOARDINFO is not set
18 CONFIG_HUSH_PARSER=y
19 CONFIG_SYS_PROMPT="U-Boot> "
20 # CONFIG_CMD_BDI is not set
21 CONFIG_CMD_BOOTZ=y
22 # CONFIG_CMD_IMI is not set
23 # CONFIG_CMD_LOADS is not set
24 CONFIG_CMD_MMC=y
25 CONFIG_CMD_NAND=y
26 CONFIG_CMD_SF=y
27 # CONFIG_CMD_SOURCE is not set
28 # CONFIG_CMD_SETEXPR is not set
29 CONFIG_CMD_FAT=y
30 CONFIG_OF_CONTROL=y
31 CONFIG_ENV_IS_IN_FAT=y
32 # CONFIG_NET is not set
33 CONFIG_DM=y
34 CONFIG_CLK=y
35 CONFIG_CLK_AT91=y
36 CONFIG_DM_GPIO=y
37 CONFIG_AT91_GPIO=y
38 CONFIG_DM_MMC=y
39 CONFIG_GENERIC_ATMEL_MCI=y
40 CONFIG_DM_SPI_FLASH=y
41 CONFIG_SPI_FLASH=y
42 CONFIG_SPI_FLASH_ATMEL=y
43 CONFIG_SPI_FLASH_DATAFLASH=y
44 CONFIG_PINCTRL=y
45 CONFIG_PINCTRL_AT91=y
46 CONFIG_DM_SERIAL=y
47 CONFIG_DEBUG_UART_ATMEL=y
48 CONFIG_DEBUG_UART_ANNOUNCE=y
49 CONFIG_ATMEL_USART=y
50 CONFIG_SPI=y
51 CONFIG_DM_SPI=y
52 CONFIG_TIMER=y
53 CONFIG_ATMEL_PIT_TIMER=y
54 CONFIG_LCD=y