board: atmel: sama7g5ek: avoid rewriting of configured CONFIG_BOOTCOMMAND
[platform/kernel/u-boot.git] / configs / at91sam9n12ek_nandflash_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_ARCH_AT91=y
4 CONFIG_SYS_TEXT_BASE=0x26f00000
5 CONFIG_TARGET_AT91SAM9N12EK=y
6 CONFIG_SYS_MALLOC_F_LEN=0x2000
7 CONFIG_NR_DRAM_BANKS=1
8 CONFIG_DM_GPIO=y
9 CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
10 CONFIG_DEBUG_UART_BOARD_INIT=y
11 CONFIG_DEBUG_UART_BASE=0xfffff200
12 CONFIG_DEBUG_UART_CLOCK=132000000
13 CONFIG_ENV_OFFSET_REDUND=0x100000
14 CONFIG_DEBUG_UART=y
15 CONFIG_SYS_LOAD_ADDR=0x22000000
16 CONFIG_NAND_BOOT=y
17 CONFIG_BOOTDELAY=3
18 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
19 # CONFIG_DISPLAY_BOARDINFO is not set
20 CONFIG_HUSH_PARSER=y
21 CONFIG_SYS_PROMPT="U-Boot> "
22 CONFIG_CMD_BOOTZ=y
23 # CONFIG_CMD_FLASH is not set
24 CONFIG_CMD_MMC=y
25 CONFIG_CMD_NAND=y
26 CONFIG_CMD_NAND_TRIMFFS=y
27 # CONFIG_CMD_SETEXPR is not set
28 CONFIG_CMD_DHCP=y
29 CONFIG_CMD_PING=y
30 CONFIG_CMD_FAT=y
31 CONFIG_CMD_MTDPARTS=y
32 CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
33 CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs)"
34 CONFIG_OF_CONTROL=y
35 CONFIG_ENV_IS_IN_NAND=y
36 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
37 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
38 CONFIG_DM=y
39 CONFIG_CLK=y
40 CONFIG_CLK_AT91=y
41 CONFIG_AT91_GPIO=y
42 CONFIG_GENERIC_ATMEL_MCI=y
43 CONFIG_MTD=y
44 CONFIG_NAND_ATMEL=y
45 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
46 CONFIG_DM_SPI_FLASH=y
47 CONFIG_SF_DEFAULT_SPEED=30000000
48 CONFIG_SPI_FLASH_ATMEL=y
49 CONFIG_KS8851_MLL=y
50 CONFIG_KS8851_MLL_BASEADDR=0x30000000
51 CONFIG_PINCTRL=y
52 CONFIG_PINCTRL_AT91=y
53 CONFIG_DM_SERIAL=y
54 CONFIG_DEBUG_UART_ANNOUNCE=y
55 CONFIG_ATMEL_USART=y
56 CONFIG_SPI=y
57 CONFIG_DM_SPI=y
58 CONFIG_TIMER=y
59 CONFIG_ATMEL_PIT_TIMER=y
60 CONFIG_USB=y
61 CONFIG_ATMEL_HLCD=y