config: enable SP805 watchdog support for LS1028A
[platform/kernel/u-boot.git] / configs / at91sam9n12ek_mmc_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_AT91=y
3 CONFIG_SYS_TEXT_BASE=0x26f00000
4 CONFIG_TARGET_AT91SAM9N12EK=y
5 CONFIG_SYS_MALLOC_F_LEN=0x2000
6 CONFIG_NR_DRAM_BANKS=1
7 CONFIG_DEBUG_UART_BOARD_INIT=y
8 CONFIG_DEBUG_UART_BASE=0xfffff200
9 CONFIG_DEBUG_UART_CLOCK=132000000
10 CONFIG_DEBUG_UART=y
11 CONFIG_SD_BOOT=y
12 CONFIG_BOOTDELAY=3
13 # CONFIG_CONSOLE_MUX is not set
14 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
15 # CONFIG_DISPLAY_BOARDINFO is not set
16 CONFIG_HUSH_PARSER=y
17 CONFIG_SYS_PROMPT="U-Boot> "
18 CONFIG_CMD_BOOTZ=y
19 # CONFIG_CMD_FLASH is not set
20 CONFIG_CMD_MMC=y
21 CONFIG_CMD_NAND=y
22 CONFIG_CMD_NAND_TRIMFFS=y
23 CONFIG_CMD_SF=y
24 CONFIG_CMD_USB=y
25 # CONFIG_CMD_SETEXPR is not set
26 CONFIG_CMD_DHCP=y
27 CONFIG_CMD_PING=y
28 CONFIG_CMD_FAT=y
29 CONFIG_CMD_MTDPARTS=y
30 CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
31 CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs)"
32 CONFIG_OF_CONTROL=y
33 CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
34 CONFIG_ENV_IS_IN_FAT=y
35 CONFIG_DM=y
36 CONFIG_CLK=y
37 CONFIG_CLK_AT91=y
38 CONFIG_DM_GPIO=y
39 CONFIG_AT91_GPIO=y
40 CONFIG_DM_MMC=y
41 CONFIG_GENERIC_ATMEL_MCI=y
42 CONFIG_NAND=y
43 CONFIG_NAND_ATMEL=y
44 CONFIG_DM_SPI_FLASH=y
45 CONFIG_SPI_FLASH=y
46 CONFIG_SF_DEFAULT_SPEED=30000000
47 CONFIG_SPI_FLASH_ATMEL=y
48 CONFIG_PINCTRL=y
49 CONFIG_PINCTRL_AT91=y
50 CONFIG_DM_SERIAL=y
51 CONFIG_DEBUG_UART_ATMEL=y
52 CONFIG_DEBUG_UART_ANNOUNCE=y
53 CONFIG_ATMEL_USART=y
54 CONFIG_SPI=y
55 CONFIG_DM_SPI=y
56 CONFIG_TIMER=y
57 CONFIG_ATMEL_PIT_TIMER=y
58 CONFIG_USB=y
59 CONFIG_DM_USB=y
60 CONFIG_USB_STORAGE=y
61 CONFIG_LCD=y