configs/at91sam9m10g45ek_nandflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_ARCH_AT91=y
   4 CONFIG_SYS_TEXT_BASE=0x73f00000
   5 CONFIG_SYS_MALLOC_LEN=0x80000
   6 CONFIG_TARGET_AT91SAM9M10G45EK=y
   7 CONFIG_ATMEL_LEGACY=y
   8 CONFIG_NR_DRAM_BANKS=1
   9 CONFIG_DM_GPIO=y
  10 CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
  11 CONFIG_DEBUG_UART_BOARD_INIT=y
  12 CONFIG_DEBUG_UART_BASE=0xffffee00
  13 CONFIG_DEBUG_UART_CLOCK=132000000
  14 CONFIG_ENV_OFFSET_REDUND=0x100000
  15 CONFIG_SYS_LOAD_ADDR=0x22000000
  16 CONFIG_DEBUG_UART=y
  17 CONFIG_NAND_BOOT=y
  18 CONFIG_BOOTDELAY=3
  19 CONFIG_USE_BOOTARGS=y
  20 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
  21 CONFIG_USE_BOOTCOMMAND=y
  22 CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
  23 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  24 # CONFIG_DISPLAY_BOARDINFO is not set
  25 CONFIG_RESET_PHY_R=y
  26 CONFIG_HUSH_PARSER=y
  27 CONFIG_SYS_PROMPT="U-Boot> "
  28 # CONFIG_CMD_BDI is not set
  29 CONFIG_CMD_BOOTZ=y
  30 # CONFIG_CMD_IMI is not set
  31 # CONFIG_CMD_FLASH is not set
  32 # CONFIG_CMD_LOADS is not set
  33 CONFIG_CMD_MMC=y
  34 CONFIG_CMD_NAND=y
  35 CONFIG_CMD_USB=y
  36 # CONFIG_CMD_SETEXPR is not set
  37 CONFIG_CMD_DHCP=y
  38 CONFIG_BOOTP_BOOTFILESIZE=y
  39 CONFIG_CMD_PING=y
  40 CONFIG_CMD_FAT=y
  41 CONFIG_OF_CONTROL=y
  42 CONFIG_ENV_IS_IN_NAND=y
  43 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  44 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  45 CONFIG_DM=y
  46 CONFIG_CLK=y
  47 CONFIG_CLK_AT91=y
  48 CONFIG_AT91_GPIO=y
  49 CONFIG_GENERIC_ATMEL_MCI=y
  50 CONFIG_MTD=y
  51 CONFIG_NAND_ATMEL=y
  52 CONFIG_DM_ETH=y
  53 CONFIG_MACB=y
  54 CONFIG_PINCTRL=y
  55 CONFIG_PINCTRL_AT91=y
  56 CONFIG_DM_SERIAL=y
  57 CONFIG_DEBUG_UART_ANNOUNCE=y
  58 CONFIG_ATMEL_USART=y
  59 CONFIG_TIMER=y
  60 CONFIG_ATMEL_PIT_TIMER=y
  61 CONFIG_USB=y
  62 CONFIG_USB_EHCI_HCD=y
  63 CONFIG_USB_STORAGE=y