Merge tag 'u-boot-at91-2022.07-a' of https://source.denx.de/u-boot/custodians/u-boot...
[platform/kernel/u-boot.git] / configs / at91sam9g20ek_dataflash_cs0_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_ARCH_CPU_INIT=y
4 CONFIG_ARCH_AT91=y
5 CONFIG_SYS_TEXT_BASE=0x21f00000
6 CONFIG_SYS_MALLOC_LEN=0x2d000
7 CONFIG_SYS_MALLOC_F_LEN=0x2000
8 CONFIG_TARGET_AT91SAM9260EK=y
9 CONFIG_ATMEL_LEGACY=y
10 CONFIG_AT91SAM9260EK=y
11 CONFIG_NR_DRAM_BANKS=1
12 CONFIG_ENV_SIZE=0x4200
13 CONFIG_ENV_OFFSET=0x4200
14 CONFIG_ENV_SECT_SIZE=0x210
15 CONFIG_DM_GPIO=y
16 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek"
17 CONFIG_DEBUG_UART_BOARD_INIT=y
18 CONFIG_DEBUG_UART_BASE=0xfffff200
19 CONFIG_DEBUG_UART_CLOCK=132000000
20 CONFIG_DEBUG_UART=y
21 CONFIG_SYS_LOAD_ADDR=0x22000000
22 CONFIG_BOOTDELAY=3
23 CONFIG_USE_BOOTARGS=y
24 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
25 CONFIG_USE_BOOTCOMMAND=y
26 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
27 # CONFIG_DISPLAY_BOARDINFO is not set
28 CONFIG_SYS_PROMPT="U-Boot> "
29 # CONFIG_CMD_BDI is not set
30 CONFIG_CMD_BOOTZ=y
31 # CONFIG_CMD_IMI is not set
32 # CONFIG_CMD_LOADS is not set
33 CONFIG_CMD_NAND=y
34 # CONFIG_CMD_SOURCE is not set
35 # CONFIG_CMD_SETEXPR is not set
36 CONFIG_CMD_DHCP=y
37 CONFIG_BOOTP_BOOTFILESIZE=y
38 CONFIG_CMD_PING=y
39 CONFIG_CMD_FAT=y
40 CONFIG_OF_CONTROL=y
41 CONFIG_ENV_IS_IN_SPI_FLASH=y
42 CONFIG_ENV_SPI_MAX_HZ=15000000
43 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
44 CONFIG_DM=y
45 CONFIG_CLK=y
46 CONFIG_CLK_AT91=y
47 CONFIG_AT91_GPIO=y
48 # CONFIG_MMC is not set
49 CONFIG_MTD=y
50 CONFIG_MTD_RAW_NAND=y
51 CONFIG_NAND_ATMEL=y
52 CONFIG_DM_SPI_FLASH=y
53 CONFIG_SPI_FLASH_ATMEL=y
54 CONFIG_SPI_FLASH_DATAFLASH=y
55 CONFIG_DM_ETH=y
56 CONFIG_MACB=y
57 CONFIG_PINCTRL=y
58 CONFIG_PINCTRL_AT91=y
59 CONFIG_DM_SERIAL=y
60 CONFIG_DEBUG_UART_ANNOUNCE=y
61 CONFIG_ATMEL_USART=y
62 CONFIG_SPI=y
63 CONFIG_DM_SPI=y
64 CONFIG_TIMER=y
65 CONFIG_ATMEL_PIT_TIMER=y
66 CONFIG_USB=y