nanopc-t4: Enable USB Gadget
[platform/kernel/u-boot.git] / configs / at91sam9g20ek_2mmc_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_CPU_INIT=y
3 CONFIG_ARCH_AT91=y
4 CONFIG_SYS_TEXT_BASE=0x21f00000
5 CONFIG_TARGET_AT91SAM9260EK=y
6 CONFIG_SYS_MALLOC_F_LEN=0x2000
7 CONFIG_ENV_SIZE=0x1000
8 CONFIG_ENV_OFFSET=0x2000
9 CONFIG_DM_GPIO=y
10 CONFIG_NR_DRAM_BANKS=1
11 CONFIG_DEBUG_UART_BOARD_INIT=y
12 CONFIG_DEBUG_UART_BASE=0xfffff200
13 CONFIG_DEBUG_UART_CLOCK=132000000
14 CONFIG_DEBUG_UART=y
15 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC"
16 CONFIG_BOOTDELAY=3
17 CONFIG_USE_BOOTARGS=y
18 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
19 # CONFIG_DISPLAY_BOARDINFO is not set
20 CONFIG_SYS_PROMPT="U-Boot> "
21 # CONFIG_CMD_BDI is not set
22 CONFIG_CMD_BOOTZ=y
23 # CONFIG_CMD_IMI is not set
24 # CONFIG_CMD_LOADS is not set
25 CONFIG_CMD_MMC=y
26 CONFIG_CMD_NAND=y
27 CONFIG_CMD_USB=y
28 # CONFIG_CMD_SOURCE is not set
29 # CONFIG_CMD_SETEXPR is not set
30 CONFIG_CMD_DHCP=y
31 CONFIG_CMD_PING=y
32 CONFIG_CMD_FAT=y
33 CONFIG_OF_CONTROL=y
34 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek_2mmc"
35 CONFIG_ENV_IS_IN_MMC=y
36 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
37 CONFIG_DM=y
38 CONFIG_CLK=y
39 CONFIG_CLK_AT91=y
40 CONFIG_AT91_GPIO=y
41 CONFIG_DM_MMC=y
42 CONFIG_GENERIC_ATMEL_MCI=y
43 CONFIG_MTD=y
44 CONFIG_MTD_RAW_NAND=y
45 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
46 CONFIG_NAND_ATMEL=y
47 CONFIG_DM_SPI_FLASH=y
48 CONFIG_SPI_FLASH_ATMEL=y
49 CONFIG_SPI_FLASH_DATAFLASH=y
50 CONFIG_DM_ETH=y
51 CONFIG_MACB=y
52 CONFIG_PINCTRL=y
53 CONFIG_PINCTRL_AT91=y
54 CONFIG_DM_SERIAL=y
55 CONFIG_DEBUG_UART_ATMEL=y
56 CONFIG_DEBUG_UART_ANNOUNCE=y
57 CONFIG_ATMEL_USART=y
58 CONFIG_SPI=y
59 CONFIG_DM_SPI=y
60 CONFIG_TIMER=y
61 CONFIG_ATMEL_PIT_TIMER=y
62 CONFIG_USB=y
63 CONFIG_DM_USB=y
64 CONFIG_USB_STORAGE=y