configs: am65_evm_r5_usb*_defconfig: Sync the checks for size of image and stack...
[platform/kernel/u-boot.git] / configs / at91sam9g10ek_nandflash_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_ARCH_AT91=y
4 CONFIG_SYS_TEXT_BASE=0x21f00000
5 CONFIG_SYS_MALLOC_LEN=0x80000
6 CONFIG_TARGET_AT91SAM9261EK=y
7 CONFIG_ATMEL_LEGACY=y
8 CONFIG_AT91SAM9G10=y
9 CONFIG_NR_DRAM_BANKS=1
10 CONFIG_DM_GPIO=y
11 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
12 CONFIG_DEBUG_UART_BOARD_INIT=y
13 CONFIG_DEBUG_UART_BASE=0xfffff200
14 CONFIG_DEBUG_UART_CLOCK=100000000
15 CONFIG_ENV_OFFSET_REDUND=0x100000
16 CONFIG_SYS_LOAD_ADDR=0x22000000
17 CONFIG_DEBUG_UART=y
18 CONFIG_NAND_BOOT=y
19 CONFIG_BOOTDELAY=3
20 CONFIG_USE_BOOTARGS=y
21 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
22 CONFIG_USE_BOOTCOMMAND=y
23 CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
24 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
25 # CONFIG_DISPLAY_BOARDINFO is not set
26 CONFIG_RESET_PHY_R=y
27 CONFIG_SYS_PROMPT="U-Boot> "
28 CONFIG_SYS_CBSIZE=256
29 CONFIG_SYS_PBSIZE=281
30 # CONFIG_CMD_BDI is not set
31 # CONFIG_CMD_IMI is not set
32 # CONFIG_CMD_LOADS is not set
33 CONFIG_CMD_NAND=y
34 # CONFIG_CMD_SOURCE is not set
35 # CONFIG_CMD_SETEXPR is not set
36 CONFIG_CMD_DHCP=y
37 CONFIG_BOOTP_BOOTFILESIZE=y
38 CONFIG_CMD_PING=y
39 CONFIG_CMD_FAT=y
40 CONFIG_OF_CONTROL=y
41 CONFIG_ENV_IS_IN_NAND=y
42 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
43 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
44 CONFIG_NET_RETRY_COUNT=20
45 CONFIG_DM=y
46 CONFIG_CLK=y
47 CONFIG_CLK_AT91=y
48 CONFIG_AT91_GPIO=y
49 # CONFIG_MMC is not set
50 CONFIG_MTD=y
51 CONFIG_NAND_ATMEL=y
52 CONFIG_DM_SPI_FLASH=y
53 CONFIG_SPI_FLASH_ATMEL=y
54 CONFIG_SPI_FLASH_DATAFLASH=y
55 CONFIG_PINCTRL=y
56 CONFIG_PINCTRL_AT91=y
57 CONFIG_DM_SERIAL=y
58 CONFIG_DEBUG_UART_ANNOUNCE=y
59 CONFIG_ATMEL_USART=y
60 CONFIG_SPI=y
61 CONFIG_DM_SPI=y
62 CONFIG_USB=y