configs/at91sam9261ek_nandflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_SYS_TEXT_BASE=0x21f00000
   4 CONFIG_TARGET_AT91SAM9261EK=y
   5 CONFIG_SYS_MALLOC_F_LEN=0x2000
   6 CONFIG_NR_DRAM_BANKS=1
   7 CONFIG_DM_GPIO=y
   8 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
   9 CONFIG_DEBUG_UART_BOARD_INIT=y
  10 CONFIG_DEBUG_UART_BASE=0xfffff200
  11 CONFIG_DEBUG_UART_CLOCK=100000000
  12 CONFIG_ENV_OFFSET_REDUND=0x100000
  13 CONFIG_DEBUG_UART=y
  14 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH"
  15 CONFIG_BOOTDELAY=3
  16 CONFIG_USE_BOOTARGS=y
  17 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
  18 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  19 # CONFIG_DISPLAY_BOARDINFO is not set
  20 CONFIG_SYS_PROMPT="U-Boot> "
  21 # CONFIG_CMD_BDI is not set
  22 # CONFIG_CMD_IMI is not set
  23 # CONFIG_CMD_LOADS is not set
  24 CONFIG_CMD_NAND=y
  25 # CONFIG_CMD_SOURCE is not set
  26 # CONFIG_CMD_SETEXPR is not set
  27 CONFIG_CMD_DHCP=y
  28 CONFIG_CMD_PING=y
  29 CONFIG_CMD_FAT=y
  30 CONFIG_OF_CONTROL=y
  31 CONFIG_ENV_IS_IN_NAND=y
  32 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  33 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  34 CONFIG_DM=y
  35 CONFIG_CLK=y
  36 CONFIG_CLK_AT91=y
  37 CONFIG_AT91_GPIO=y
  38 # CONFIG_MMC is not set
  39 CONFIG_MTD=y
  40 CONFIG_MTD_RAW_NAND=y
  41 CONFIG_NAND_ATMEL=y
  42 CONFIG_DM_SPI_FLASH=y
  43 CONFIG_SPI_FLASH_ATMEL=y
  44 CONFIG_SPI_FLASH_DATAFLASH=y
  45 CONFIG_PINCTRL=y
  46 CONFIG_PINCTRL_AT91=y
  47 CONFIG_DM_SERIAL=y
  48 CONFIG_DEBUG_UART_ANNOUNCE=y
  49 CONFIG_ATMEL_USART=y
  50 CONFIG_SPI=y
  51 CONFIG_DM_SPI=y
  52 CONFIG_TIMER=y
  53 CONFIG_ATMEL_PIT_TIMER=y
  54 CONFIG_USB=y