arm: kirkwood: enable DM_USB for LaCie board
[platform/kernel/u-boot.git] / configs / apf27_defconfig
1 CONFIG_ARM=y
2 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
3 CONFIG_TARGET_APF27=y
4 CONFIG_SYS_TEXT_BASE=0xA0000800
5 CONFIG_ENV_SIZE=0x20000
6 CONFIG_ENV_OFFSET=0x100000
7 CONFIG_SPL_TEXT_BASE=0xA0000000
8 CONFIG_SPL_SERIAL_SUPPORT=y
9 CONFIG_NR_DRAM_BANKS=2
10 CONFIG_SPL=y
11 CONFIG_ENV_OFFSET_REDUND=0x180000
12 CONFIG_IDENT_STRING=" apf27 patch 3.10"
13 CONFIG_ENV_VARS_UBOOT_CONFIG=y
14 CONFIG_BOOTDELAY=5
15 CONFIG_USE_BOOTARGS=y
16 CONFIG_BOOTARGS="console=ttySMX0,115200 mtdparts=mxc_nand.0:1M(u-boot)ro,512K(env),512K(env2),512K(firmware),512K(dtb),5M(kernel),-(rootfs) ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
17 CONFIG_USE_PREBOOT=y
18 CONFIG_PREBOOT="run check_flash check_env;"
19 CONFIG_VERSION_VARIABLE=y
20 # CONFIG_SPL_FRAMEWORK is not set
21 CONFIG_SPL_NAND_SUPPORT=y
22 CONFIG_HUSH_PARSER=y
23 CONFIG_SYS_PROMPT="BIOS> "
24 CONFIG_CMD_ASKENV=y
25 CONFIG_CMD_EEPROM=y
26 # CONFIG_CMD_FLASH is not set
27 CONFIG_CMD_I2C=y
28 CONFIG_CMD_MMC=y
29 CONFIG_CMD_NAND_TRIMFFS=y
30 CONFIG_CMD_NAND_LOCK_UNLOCK=y
31 CONFIG_CMD_DHCP=y
32 CONFIG_BOOTP_DNS2=y
33 CONFIG_CMD_MII=y
34 CONFIG_CMD_PING=y
35 CONFIG_CMD_DNS=y
36 CONFIG_CMD_BSP=y
37 CONFIG_CMD_CACHE=y
38 CONFIG_CMD_DATE=y
39 CONFIG_CMD_EXT2=y
40 CONFIG_CMD_FAT=y
41 CONFIG_CMD_MTDPARTS=y
42 CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand.0"
43 CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand.0:1M(u-boot)ro,512K(env),512K(env2),512K(firmware),512K(dtb),5M(kernel),-(rootfs)"
44 CONFIG_CMD_UBI=y
45 CONFIG_ENV_IS_IN_NAND=y
46 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
47 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
48 CONFIG_FPGA_XILINX=y
49 CONFIG_FPGA_SPARTAN3=y
50 CONFIG_MXC_GPIO=y
51 CONFIG_MMC_MXC=y
52 CONFIG_MTD=y
53 CONFIG_MTD_RAW_NAND=y
54 CONFIG_NAND_MXC=y
55 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
56 CONFIG_MII=y
57 CONFIG_OF_LIBFDT=y