omapl138_lcdk: enable SPL MMC support
[platform/kernel/u-boot.git] / configs / ap121_defconfig
1 CONFIG_MIPS=y
2 CONFIG_SYS_MALLOC_F_LEN=0x2000
3 CONFIG_ARCH_ATH79=y
4 CONFIG_DEFAULT_DEVICE_TREE="ap121"
5 CONFIG_BOOTDELAY=3
6 CONFIG_DISPLAY_CPUINFO=y
7 CONFIG_SYS_PROMPT="ap121 # "
8 # CONFIG_CMD_BDI is not set
9 # CONFIG_CMD_CONSOLE is not set
10 # CONFIG_CMD_ELF is not set
11 # CONFIG_CMD_IMLS is not set
12 # CONFIG_CMD_XIMG is not set
13 # CONFIG_CMD_EXPORTENV is not set
14 # CONFIG_CMD_IMPORTENV is not set
15 # CONFIG_CMD_EDITENV is not set
16 # CONFIG_CMD_CRC32 is not set
17 # CONFIG_CMD_FLASH is not set
18 CONFIG_CMD_SF=y
19 CONFIG_CMD_SPI=y
20 # CONFIG_CMD_FPGA is not set
21 CONFIG_CMD_DHCP=y
22 CONFIG_CMD_PING=y
23 CONFIG_NET_RANDOM_ETHADDR=y
24 CONFIG_DM_SPI_FLASH=y
25 CONFIG_SPI_FLASH=y
26 CONFIG_SPI_FLASH_BAR=y
27 CONFIG_SPI_FLASH_ATMEL=y
28 CONFIG_SPI_FLASH_EON=y
29 CONFIG_SPI_FLASH_GIGADEVICE=y
30 CONFIG_SPI_FLASH_MACRONIX=y
31 CONFIG_SPI_FLASH_SPANSION=y
32 CONFIG_SPI_FLASH_STMICRO=y
33 CONFIG_SPI_FLASH_SST=y
34 CONFIG_SPI_FLASH_WINBOND=y
35 CONFIG_SPI_FLASH_DATAFLASH=y
36 CONFIG_SPI_FLASH_MTD=y
37 CONFIG_DM_ETH=y
38 CONFIG_AG7XXX=y
39 CONFIG_PINCTRL=y
40 CONFIG_PINCONF=y
41 CONFIG_AR933X_PINCTRL=y
42 CONFIG_DM_SERIAL=y
43 CONFIG_DEBUG_UART=y
44 CONFIG_DEBUG_UART_AR933X=y
45 CONFIG_DEBUG_UART_BASE=0xb8020000
46 CONFIG_DEBUG_UART_CLOCK=25000000
47 CONFIG_DEBUG_UART_BOARD_INIT=y
48 CONFIG_AR933X_UART=y
49 CONFIG_DM_SPI=y
50 CONFIG_ATH79_SPI=y