2 CONFIG_TEXT_BASE=0x00200000
3 CONFIG_SPL_LIBCOMMON_SUPPORT=y
4 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_ENV_OFFSET=0x100000
7 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
8 CONFIG_SPL_TEXT_BASE=0xFFFD8000
10 CONFIG_SPL_DRIVERS_MISC=y
13 CONFIG_TARGET_T2080RDB=y
14 CONFIG_ENABLE_36BIT_PHYS=y
15 CONFIG_SYS_BOOK3E_HV=y
16 CONFIG_SYS_CACHE_STASHING=y
17 CONFIG_SYS_MPC85XX_NO_RESETVEC=y
18 CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y
19 CONFIG_T2080RDB_REV_D=y
25 CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv"
26 CONFIG_VOL_MONITOR_IR36021_READ=y
27 CONFIG_VOL_MONITOR_IR36021_SET=y
28 CONFIG_SYS_FSL_NUM_CC_PLLS=2
29 CONFIG_SYS_MEMTEST_START=0x00200000
30 CONFIG_SYS_MEMTEST_END=0x00400000
34 CONFIG_OF_BOARD_SETUP=y
35 CONFIG_OF_STDOUT_VIA_ALIAS=y
37 CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg"
38 CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_nand_rcw.cfg"
40 CONFIG_USE_BOOTCOMMAND=y
41 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
42 CONFIG_ARCH_MISC_INIT=y
43 CONFIG_BOARD_EARLY_INIT_R=y
44 # CONFIG_SPL_FRAMEWORK is not set
45 CONFIG_SPL_MAX_SIZE=0x28000
46 CONFIG_SPL_PAD_TO=0x40000
47 CONFIG_SPL_NAND_BOOT=y
49 CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
50 CONFIG_SPL_FLUSH_IMAGE=y
51 CONFIG_SPL_SKIP_RELOCATE=y
52 CONFIG_SPL_GD_ADDR=0xfffc8000
53 CONFIG_SPL_RELOC_STACK=0xfffd8000
54 CONFIG_SPL_RELOC_MALLOC=y
55 CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
56 CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
57 CONFIG_SPL_ENV_SUPPORT=y
59 CONFIG_SPL_MPC8XXX_INIT_DDR=y
60 CONFIG_SPL_NAND_SUPPORT=y
64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
66 CONFIG_SYS_ALT_MEMTEST=y
77 CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
78 CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
79 # CONFIG_CMD_IRQ is not set
81 CONFIG_ENV_OVERWRITE=y
82 CONFIG_ENV_IS_IN_NAND=y
84 CONFIG_BOOTFILE="uImage"
86 CONFIG_ETHPRIME="FM1@DTSEC3"
88 CONFIG_SYS_SATA_MAX_DEVICE=2
90 CONFIG_DDR_CLK_FREQ=133330000
92 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
94 CONFIG_SPL_SYS_I2C_LEGACY=y
95 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
97 CONFIG_SYS_FSL_I2C_OFFSET=0x118000
98 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
99 CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
100 CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y
101 CONFIG_SYS_FSL_I2C3_OFFSET=0x119000
102 CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y
103 CONFIG_SYS_FSL_I2C4_OFFSET=0x119100
104 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
107 CONFIG_MTD_NOR_FLASH=y
108 CONFIG_FLASH_CFI_DRIVER=y
109 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
110 CONFIG_SYS_FLASH_EMPTY_INFO=y
111 CONFIG_FLASH_CFI_MTD=y
112 CONFIG_SYS_FLASH_CFI=y
113 CONFIG_SYS_FLASH_QUIET_TEST=y
114 CONFIG_SYS_MAX_FLASH_SECT=1024
115 CONFIG_MTD_RAW_NAND=y
116 CONFIG_NAND_FSL_IFC=y
117 CONFIG_SYS_NAND_ONFI_DETECTION=y
118 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
119 CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
120 CONFIG_DM_SPI_FLASH=y
121 CONFIG_SF_DEFAULT_SPEED=10000000
122 CONFIG_SPI_FLASH_STMICRO=y
124 CONFIG_PHY_AQUANTIA=y
126 CONFIG_SYS_CORTINA_FW_IN_NAND=y
127 CONFIG_CORTINA_FW_ADDR=0x200000
132 CONFIG_SYS_FMAN_FW_ADDR=0x180000
134 CONFIG_DM_PCI_COMPAT=y
136 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
144 CONFIG_USB_EHCI_FSL=y
145 CONFIG_USB_MAX_CONTROLLER_COUNT=2
148 CONFIG_SYS_NUM_ADDR_MAP=64