2 CONFIG_SYS_TEXT_BASE=0xEFF40000
4 CONFIG_ENV_SECT_SIZE=0x20000
5 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
7 CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv"
8 CONFIG_VOL_MONITOR_IR36021_READ=y
9 CONFIG_VOL_MONITOR_IR36021_SET=y
10 CONFIG_ENV_ADDR=0xEFF20000
12 CONFIG_TARGET_T2080RDB=y
13 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
14 CONFIG_SYS_MEMTEST_START=0x00200000
15 CONFIG_SYS_MEMTEST_END=0x00400000
19 CONFIG_OF_BOARD_SETUP=y
20 CONFIG_OF_STDOUT_VIA_ALIAS=y
22 CONFIG_USE_BOOTCOMMAND=y
23 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
24 CONFIG_ARCH_MISC_INIT=y
25 CONFIG_BOARD_EARLY_INIT_R=y
29 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
31 CONFIG_SYS_ALT_MEMTEST=y
42 CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
43 CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
44 # CONFIG_CMD_IRQ is not set
46 CONFIG_ENV_OVERWRITE=y
47 CONFIG_ENV_IS_IN_FLASH=y
49 CONFIG_BOOTFILE="uImage"
51 CONFIG_ETHPRIME="FM1@DTSEC3"
53 CONFIG_SYS_SATA_MAX_DEVICE=2
55 CONFIG_DDR_CLK_FREQ=133330000
57 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
59 CONFIG_SPL_SYS_I2C_LEGACY=y
60 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
62 CONFIG_SYS_FSL_I2C_OFFSET=0x118000
63 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
64 CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
65 CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y
66 CONFIG_SYS_FSL_I2C3_OFFSET=0x119000
67 CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y
68 CONFIG_SYS_FSL_I2C4_OFFSET=0x119100
69 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
72 CONFIG_MTD_NOR_FLASH=y
73 CONFIG_FLASH_CFI_DRIVER=y
74 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
75 CONFIG_FLASH_CFI_MTD=y
76 CONFIG_SYS_FLASH_CFI=y
78 CONFIG_SF_DEFAULT_SPEED=10000000
79 CONFIG_SPI_FLASH_STMICRO=y
83 CONFIG_CORTINA_FW_ADDR=0xEFE00000
89 CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000
92 CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
100 CONFIG_USB_EHCI_FSL=y
103 CONFIG_SYS_NUM_ADDR_MAP=64