2 CONFIG_SYS_TEXT_BASE=0x00201000
3 CONFIG_SPL_LIBCOMMON_SUPPORT=y
4 CONFIG_SPL_LIBGENERIC_SUPPORT=y
5 CONFIG_SYS_MEMTEST_START=0x00200000
6 CONFIG_SYS_MEMTEST_END=0x00400000
8 CONFIG_ENV_OFFSET=0x100000
9 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
10 CONFIG_SPL_TEXT_BASE=0xFFFD8000
12 CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv"
13 CONFIG_VOL_MONITOR_IR36021_READ=y
14 CONFIG_VOL_MONITOR_IR36021_SET=y
16 CONFIG_SPL_DRIVERS_MISC=y
19 CONFIG_TARGET_T2080RDB=y
20 CONFIG_SYS_CUSTOM_LDSCRIPT=y
21 CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
25 CONFIG_OF_BOARD_SETUP=y
26 CONFIG_OF_STDOUT_VIA_ALIAS=y
28 CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg"
29 CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_nand_rcw.cfg"
31 CONFIG_USE_BOOTCOMMAND=y
32 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
33 CONFIG_BOARD_EARLY_INIT_R=y
34 # CONFIG_SPL_FRAMEWORK is not set
35 CONFIG_SPL_NAND_BOOT=y
37 CONFIG_SPL_ENV_SUPPORT=y
39 CONFIG_SPL_MPC8XXX_INIT_DDR=y
40 CONFIG_SPL_NAND_SUPPORT=y
43 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
45 CONFIG_SYS_ALT_MEMTEST=y
56 CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
57 CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
58 # CONFIG_CMD_IRQ is not set
60 CONFIG_ENV_OVERWRITE=y
61 CONFIG_ENV_IS_IN_NAND=y
63 CONFIG_BOOTFILE="uImage"
65 CONFIG_SYS_SATA_MAX_DEVICE=2
67 CONFIG_DDR_CLK_FREQ=133330000
69 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
71 CONFIG_SPL_SYS_I2C_LEGACY=y
72 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
74 CONFIG_SYS_FSL_I2C_OFFSET=0x118000
75 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
76 CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
77 CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y
78 CONFIG_SYS_FSL_I2C3_OFFSET=0x119000
79 CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y
80 CONFIG_SYS_FSL_I2C4_OFFSET=0x119100
81 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
84 CONFIG_MTD_NOR_FLASH=y
85 CONFIG_FLASH_CFI_DRIVER=y
86 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
87 CONFIG_FLASH_CFI_MTD=y
88 CONFIG_SYS_FLASH_CFI=y
91 CONFIG_SYS_NAND_ONFI_DETECTION=y
92 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
93 CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
95 CONFIG_SF_DEFAULT_SPEED=10000000
96 CONFIG_SPI_FLASH_STMICRO=y
100 CONFIG_SYS_CORTINA_FW_IN_NAND=y
101 CONFIG_CORTINA_FW_ADDR=0x200000
107 CONFIG_SYS_FMAN_FW_ADDR=0x180000
110 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
118 CONFIG_USB_EHCI_FSL=y
121 CONFIG_SYS_NUM_ADDR_MAP=64