2 CONFIG_SYS_TEXT_BASE=0xEFF40000
4 CONFIG_ENV_SECT_SIZE=0x20000
5 CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
6 CONFIG_ENV_ADDR=0xEFF20000
8 CONFIG_TARGET_T1042D4RDB=y
9 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
10 CONFIG_ENABLE_36BIT_PHYS=y
11 CONFIG_SYS_BOOK3E_HV=y
12 CONFIG_SYS_CACHE_STASHING=y
20 CONFIG_OF_BOARD_SETUP=y
21 CONFIG_OF_STDOUT_VIA_ALIAS=y
23 CONFIG_USE_BOOTCOMMAND=y
24 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
25 CONFIG_SILENT_CONSOLE=y
26 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
27 CONFIG_ARCH_MISC_INIT=y
28 CONFIG_BOARD_EARLY_INIT_F=y
29 CONFIG_BOARD_EARLY_INIT_R=y
43 CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
44 CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
46 CONFIG_ENV_OVERWRITE=y
47 CONFIG_ENV_IS_IN_FLASH=y
49 CONFIG_BOOTFILE="uImage"
51 CONFIG_ETHPRIME="FM1@DTSEC4"
54 CONFIG_DDR_CLK_FREQ=66666666
55 CONFIG_CHIP_SELECTS_PER_CTRL=2
57 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
59 CONFIG_SPL_SYS_I2C_LEGACY=y
60 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
62 CONFIG_SYS_FSL_I2C_OFFSET=0x118000
63 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
64 CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
65 CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y
66 CONFIG_SYS_FSL_I2C3_OFFSET=0x119000
67 CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y
68 CONFIG_SYS_FSL_I2C4_OFFSET=0x119100
71 CONFIG_MTD_NOR_FLASH=y
72 CONFIG_FLASH_CFI_DRIVER=y
73 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
74 CONFIG_SYS_FLASH_EMPTY_INFO=y
75 CONFIG_FLASH_CFI_MTD=y
76 CONFIG_SYS_FLASH_CFI=y
77 CONFIG_SYS_FLASH_QUIET_TEST=y
78 CONFIG_SYS_MAX_FLASH_SECT=1024
79 CONFIG_SYS_MAX_FLASH_BANKS=2
81 CONFIG_SF_DEFAULT_SPEED=10000000
82 CONFIG_SPI_FLASH_STMICRO=y
91 CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000
95 CONFIG_SYS_QE_FW_ADDR=0xEFF10000
96 CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
103 CONFIG_USB_EHCI_FSL=y
104 CONFIG_USB_MAX_CONTROLLER_COUNT=2
107 CONFIG_SYS_NUM_ADDR_MAP=64