binman: Update fit to move node reading into the ReadNode() method
[platform/kernel/u-boot.git] / configs / T1042D4RDB_NAND_defconfig
1 CONFIG_PPC=y
2 CONFIG_SYS_TEXT_BASE=0x30001000
3 CONFIG_SPL_LIBCOMMON_SUPPORT=y
4 CONFIG_SPL_LIBGENERIC_SUPPORT=y
5 CONFIG_ENV_SIZE=0x2000
6 CONFIG_ENV_OFFSET=0x180000
7 CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
8 CONFIG_SPL_TEXT_BASE=0xFFFD8000
9 CONFIG_SPL_SERIAL=y
10 CONFIG_SPL_DRIVERS_MISC=y
11 CONFIG_SPL=y
12 CONFIG_MPC85xx=y
13 CONFIG_TARGET_T1042D4RDB=y
14 CONFIG_SYS_CUSTOM_LDSCRIPT=y
15 CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
16 CONFIG_MP=y
17 CONFIG_FIT=y
18 CONFIG_FIT_VERBOSE=y
19 CONFIG_OF_BOARD_SETUP=y
20 CONFIG_OF_STDOUT_VIA_ALIAS=y
21 CONFIG_RAMBOOT_PBL=y
22 CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg"
23 CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg"
24 CONFIG_BOOTDELAY=10
25 CONFIG_USE_BOOTCOMMAND=y
26 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
27 CONFIG_SILENT_CONSOLE=y
28 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
29 CONFIG_BOARD_EARLY_INIT_F=y
30 CONFIG_BOARD_EARLY_INIT_R=y
31 # CONFIG_SPL_FRAMEWORK is not set
32 CONFIG_SPL_NAND_BOOT=y
33 CONFIG_SPL_FSL_PBL=y
34 CONFIG_SPL_ENV_SUPPORT=y
35 CONFIG_SPL_I2C=y
36 CONFIG_SPL_MPC8XXX_INIT_DDR=y
37 CONFIG_SPL_NAND_SUPPORT=y
38 CONFIG_HUSH_PARSER=y
39 CONFIG_CMD_IMLS=y
40 CONFIG_CMD_GREPENV=y
41 CONFIG_CMD_DM=y
42 CONFIG_CMD_I2C=y
43 CONFIG_CMD_MMC=y
44 CONFIG_CMD_USB=y
45 CONFIG_CMD_DHCP=y
46 CONFIG_CMD_MII=y
47 CONFIG_CMD_PING=y
48 CONFIG_CMD_EXT2=y
49 CONFIG_CMD_FAT=y
50 CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
51 CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
52 CONFIG_OF_CONTROL=y
53 CONFIG_ENV_OVERWRITE=y
54 CONFIG_ENV_IS_IN_NAND=y
55 CONFIG_USE_BOOTFILE=y
56 CONFIG_BOOTFILE="uImage"
57 CONFIG_DM=y
58 CONFIG_FSL_CAAM=y
59 CONFIG_DDR_CLK_FREQ=66666666
60 CONFIG_CHIP_SELECTS_PER_CTRL=2
61 CONFIG_DDR_ECC=y
62 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
63 CONFIG_DM_I2C=y
64 CONFIG_SPL_SYS_I2C_LEGACY=y
65 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
66 CONFIG_SYS_I2C_FSL=y
67 CONFIG_SYS_FSL_I2C_OFFSET=0x118000
68 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
69 CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
70 CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y
71 CONFIG_SYS_FSL_I2C3_OFFSET=0x119000
72 CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y
73 CONFIG_SYS_FSL_I2C4_OFFSET=0x119100
74 CONFIG_FSL_ESDHC=y
75 CONFIG_MTD=y
76 CONFIG_MTD_NOR_FLASH=y
77 CONFIG_FLASH_CFI_DRIVER=y
78 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
79 CONFIG_FLASH_CFI_MTD=y
80 CONFIG_SYS_FLASH_CFI=y
81 CONFIG_SYS_MAX_FLASH_BANKS=2
82 CONFIG_MTD_RAW_NAND=y
83 CONFIG_NAND_FSL_IFC=y
84 CONFIG_SYS_NAND_ONFI_DETECTION=y
85 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
86 CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
87 CONFIG_DM_SPI_FLASH=y
88 CONFIG_SF_DEFAULT_SPEED=10000000
89 CONFIG_SPI_FLASH_STMICRO=y
90 CONFIG_PHYLIB=y
91 CONFIG_PHY_REALTEK=y
92 CONFIG_PHY_VITESSE=y
93 CONFIG_DM_ETH=y
94 CONFIG_DM_MDIO=y
95 CONFIG_PHY_GIGE=y
96 CONFIG_E1000=y
97 CONFIG_FMAN_ENET=y
98 CONFIG_SYS_FMAN_FW_ADDR=0x280000
99 CONFIG_MII=y
100 CONFIG_PCIE_FSL=y
101 CONFIG_U_QE=y
102 CONFIG_SYS_QE_FW_ADDR=0x380000
103 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
104 CONFIG_DM_RTC=y
105 CONFIG_SYS_NS16550=y
106 CONFIG_SPI=y
107 CONFIG_DM_SPI=y
108 CONFIG_FSL_ESPI=y
109 CONFIG_USB=y
110 CONFIG_USB_EHCI_FSL=y
111 CONFIG_USB_STORAGE=y
112 CONFIG_ADDR_MAP=y
113 CONFIG_SYS_NUM_ADDR_MAP=64