2 CONFIG_SYS_TEXT_BASE=0x30001000
3 CONFIG_SYS_MALLOC_LEN=0xa00000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_ENV_OFFSET=0x100000
8 CONFIG_ENV_SECT_SIZE=0x10000
9 CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
10 CONFIG_SPL_TEXT_BASE=0xFFFD8000
12 CONFIG_SPL_DRIVERS_MISC=y
14 CONFIG_SPL_SPI_FLASH_SUPPORT=y
17 CONFIG_TARGET_T1024RDB=y
18 CONFIG_SYS_MEMTEST_START=0x00200000
19 CONFIG_SYS_MEMTEST_END=0x00400000
23 CONFIG_OF_BOARD_SETUP=y
24 CONFIG_OF_STDOUT_VIA_ALIAS=y
27 CONFIG_SYS_FSL_PBL_PBI="board/freescale/t102xrdb/t1024_pbi.cfg"
28 CONFIG_SYS_FSL_PBL_RCW="board/freescale/t102xrdb/t1024_spi_rcw.cfg"
30 CONFIG_USE_BOOTCOMMAND=y
31 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
32 CONFIG_SILENT_CONSOLE=y
33 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
34 CONFIG_ARCH_MISC_INIT=y
35 CONFIG_BOARD_EARLY_INIT_F=y
36 CONFIG_BOARD_EARLY_INIT_R=y
38 # CONFIG_SPL_FRAMEWORK is not set
39 CONFIG_SPL_MAX_SIZE=0x28000
40 CONFIG_SPL_PAD_TO=0x40000
43 CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
44 CONFIG_SPL_FLUSH_IMAGE=y
45 CONFIG_SPL_SKIP_RELOCATE=y
46 CONFIG_SPL_ENV_SUPPORT=y
48 CONFIG_SPL_MPC8XXX_INIT_DDR=y
53 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
54 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
55 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
57 CONFIG_SYS_ALT_MEMTEST=y
67 CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
68 CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
70 CONFIG_ENV_OVERWRITE=y
71 CONFIG_ENV_IS_IN_SPI_FLASH=y
73 CONFIG_BOOTFILE="uImage"
75 CONFIG_ETHPRIME="FM1@DTSEC4"
80 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
82 CONFIG_SPL_SYS_I2C_LEGACY=y
83 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
85 CONFIG_SYS_FSL_I2C_OFFSET=0x118000
86 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
87 CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
88 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
91 CONFIG_MTD_NOR_FLASH=y
92 CONFIG_FLASH_CFI_DRIVER=y
93 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
94 CONFIG_FLASH_CFI_MTD=y
95 CONFIG_SYS_FLASH_CFI=y
97 CONFIG_SF_DEFAULT_SPEED=10000000
98 CONFIG_SPI_FLASH_STMICRO=y
100 CONFIG_PHY_AQUANTIA=y
106 CONFIG_SYS_FMAN_FW_ADDR=0x110000
109 CONFIG_SYS_QE_FW_ADDR=0x130000
110 CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
117 CONFIG_USB_EHCI_FSL=y
120 CONFIG_SYS_NUM_ADDR_MAP=64