Merge branch '2022-10-21-enforce-some-DM-migrations'
[platform/kernel/u-boot.git] / configs / T1024RDB_SDCARD_defconfig
1 CONFIG_PPC=y
2 CONFIG_SYS_TEXT_BASE=0x30000000
3 CONFIG_SYS_MALLOC_LEN=0xa00000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_ENV_SIZE=0x2000
7 CONFIG_ENV_OFFSET=0x100000
8 CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
9 CONFIG_SPL_TEXT_BASE=0xFFFD8000
10 CONFIG_SPL_MMC=y
11 CONFIG_SPL_SERIAL=y
12 CONFIG_SPL_DRIVERS_MISC=y
13 CONFIG_SPL=y
14 CONFIG_MPC85xx=y
15 CONFIG_TARGET_T1024RDB=y
16 CONFIG_ENABLE_36BIT_PHYS=y
17 CONFIG_SYS_BOOK3E_HV=y
18 CONFIG_SYS_CACHE_STASHING=y
19 CONFIG_SYS_MPC85XX_NO_RESETVEC=y
20 CONFIG_PCIE1=y
21 CONFIG_PCIE2=y
22 CONFIG_PCIE3=y
23 CONFIG_SYS_MEMTEST_START=0x00200000
24 CONFIG_SYS_MEMTEST_END=0x00400000
25 CONFIG_MP=y
26 CONFIG_FIT=y
27 CONFIG_FIT_VERBOSE=y
28 CONFIG_OF_BOARD_SETUP=y
29 CONFIG_OF_STDOUT_VIA_ALIAS=y
30 CONFIG_RAMBOOT_PBL=y
31 CONFIG_SYS_FSL_PBL_PBI="board/freescale/t102xrdb/t1024_pbi.cfg"
32 CONFIG_SYS_FSL_PBL_RCW="board/freescale/t102xrdb/t1024_sd_rcw.cfg"
33 CONFIG_BOOTDELAY=10
34 CONFIG_USE_BOOTCOMMAND=y
35 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
36 CONFIG_SILENT_CONSOLE=y
37 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
38 CONFIG_ARCH_MISC_INIT=y
39 CONFIG_BOARD_EARLY_INIT_F=y
40 CONFIG_BOARD_EARLY_INIT_R=y
41 CONFIG_ID_EEPROM=y
42 # CONFIG_SPL_FRAMEWORK is not set
43 CONFIG_SPL_MAX_SIZE=0x28000
44 CONFIG_SPL_PAD_TO=0x40000
45 CONFIG_SPL_MMC_BOOT=y
46 CONFIG_SPL_FSL_PBL=y
47 CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
48 CONFIG_SPL_FLUSH_IMAGE=y
49 CONFIG_SPL_SKIP_RELOCATE=y
50 CONFIG_SPL_GD_ADDR=0xfffc8000
51 CONFIG_SPL_RELOC_STACK=0xfffd8000
52 CONFIG_SPL_RELOC_MALLOC=y
53 CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
54 CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
55 CONFIG_SPL_ENV_SUPPORT=y
56 CONFIG_SPL_I2C=y
57 CONFIG_SPL_MPC8XXX_INIT_DDR=y
58 CONFIG_HUSH_PARSER=y
59 CONFIG_SYS_PBSIZE=276
60 CONFIG_CMD_IMLS=y
61 CONFIG_CMD_GREPENV=y
62 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
63 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
64 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
65 CONFIG_CMD_MEMTEST=y
66 CONFIG_SYS_ALT_MEMTEST=y
67 CONFIG_CMD_DM=y
68 CONFIG_CMD_I2C=y
69 CONFIG_CMD_MMC=y
70 CONFIG_CMD_USB=y
71 CONFIG_CMD_DHCP=y
72 CONFIG_CMD_MII=y
73 CONFIG_CMD_PING=y
74 CONFIG_CMD_EXT2=y
75 CONFIG_CMD_FAT=y
76 CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
77 CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
78 CONFIG_OF_CONTROL=y
79 CONFIG_ENV_OVERWRITE=y
80 CONFIG_ENV_IS_IN_MMC=y
81 CONFIG_USE_BOOTFILE=y
82 CONFIG_BOOTFILE="uImage"
83 CONFIG_USE_ETHPRIME=y
84 CONFIG_ETHPRIME="FM1@DTSEC4"
85 CONFIG_FSL_CAAM=y
86 CONFIG_SYS_FSL_DDR3=y
87 CONFIG_DDR_ECC=y
88 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
89 CONFIG_DM_I2C=y
90 CONFIG_SPL_SYS_I2C_LEGACY=y
91 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
92 CONFIG_SYS_I2C_FSL=y
93 CONFIG_SYS_FSL_I2C_OFFSET=0x118000
94 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
95 CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
96 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
97 CONFIG_FSL_ESDHC=y
98 CONFIG_MTD=y
99 CONFIG_MTD_NOR_FLASH=y
100 CONFIG_FLASH_CFI_DRIVER=y
101 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
102 CONFIG_SYS_FLASH_EMPTY_INFO=y
103 CONFIG_FLASH_CFI_MTD=y
104 CONFIG_SYS_FLASH_CFI=y
105 CONFIG_SYS_FLASH_QUIET_TEST=y
106 CONFIG_SYS_MAX_FLASH_SECT=1024
107 CONFIG_DM_SPI_FLASH=y
108 CONFIG_SF_DEFAULT_SPEED=10000000
109 CONFIG_SPI_FLASH_STMICRO=y
110 CONFIG_PHYLIB=y
111 CONFIG_PHY_AQUANTIA=y
112 CONFIG_PHY_REALTEK=y
113 CONFIG_DM_MDIO=y
114 CONFIG_E1000=y
115 CONFIG_FMAN_ENET=y
116 CONFIG_SYS_FMAN_FW_ADDR=0x104000
117 CONFIG_MII=y
118 CONFIG_PCIE_FSL=y
119 CONFIG_SYS_QE_FW_ADDR=0x124000
120 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
121 CONFIG_DM_RTC=y
122 CONFIG_SYS_NS16550=y
123 CONFIG_SPI=y
124 CONFIG_DM_SPI=y
125 CONFIG_FSL_ESPI=y
126 CONFIG_USB=y
127 CONFIG_USB_EHCI_FSL=y
128 CONFIG_USB_MAX_CONTROLLER_COUNT=2
129 CONFIG_USB_STORAGE=y
130 CONFIG_ADDR_MAP=y
131 CONFIG_SYS_NUM_ADDR_MAP=64