binman: Update fit to move node reading into the ReadNode() method
[platform/kernel/u-boot.git] / configs / T1024RDB_SDCARD_defconfig
1 CONFIG_PPC=y
2 CONFIG_SYS_TEXT_BASE=0x30001000
3 CONFIG_SYS_MALLOC_LEN=0xa00000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_SYS_MEMTEST_START=0x00200000
7 CONFIG_SYS_MEMTEST_END=0x00400000
8 CONFIG_ENV_SIZE=0x2000
9 CONFIG_ENV_OFFSET=0x100000
10 CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
11 CONFIG_SPL_TEXT_BASE=0xFFFD8000
12 CONFIG_SPL_MMC=y
13 CONFIG_SPL_SERIAL=y
14 CONFIG_SPL_DRIVERS_MISC=y
15 CONFIG_SPL=y
16 CONFIG_MPC85xx=y
17 CONFIG_TARGET_T1024RDB=y
18 CONFIG_MP=y
19 CONFIG_FIT=y
20 CONFIG_FIT_VERBOSE=y
21 CONFIG_OF_BOARD_SETUP=y
22 CONFIG_OF_STDOUT_VIA_ALIAS=y
23 CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
24 CONFIG_RAMBOOT_PBL=y
25 CONFIG_SYS_FSL_PBL_PBI="board/freescale/t102xrdb/t1024_pbi.cfg"
26 CONFIG_SYS_FSL_PBL_RCW="board/freescale/t102xrdb/t1024_sd_rcw.cfg"
27 CONFIG_BOOTDELAY=10
28 CONFIG_USE_BOOTCOMMAND=y
29 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
30 CONFIG_SILENT_CONSOLE=y
31 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
32 CONFIG_BOARD_EARLY_INIT_F=y
33 CONFIG_BOARD_EARLY_INIT_R=y
34 CONFIG_ID_EEPROM=y
35 # CONFIG_SPL_FRAMEWORK is not set
36 CONFIG_SPL_MMC_BOOT=y
37 CONFIG_SPL_FSL_PBL=y
38 CONFIG_SPL_ENV_SUPPORT=y
39 CONFIG_SPL_I2C=y
40 CONFIG_SPL_MPC8XXX_INIT_DDR=y
41 CONFIG_HUSH_PARSER=y
42 CONFIG_CMD_IMLS=y
43 CONFIG_CMD_GREPENV=y
44 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
45 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
46 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
47 CONFIG_CMD_MEMTEST=y
48 CONFIG_SYS_ALT_MEMTEST=y
49 CONFIG_CMD_DM=y
50 CONFIG_CMD_I2C=y
51 CONFIG_CMD_MMC=y
52 CONFIG_CMD_USB=y
53 CONFIG_CMD_DHCP=y
54 CONFIG_CMD_MII=y
55 CONFIG_CMD_PING=y
56 CONFIG_CMD_EXT2=y
57 CONFIG_CMD_FAT=y
58 CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
59 CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
60 CONFIG_OF_CONTROL=y
61 CONFIG_ENV_OVERWRITE=y
62 CONFIG_ENV_IS_IN_MMC=y
63 CONFIG_USE_BOOTFILE=y
64 CONFIG_BOOTFILE="uImage"
65 CONFIG_DM=y
66 CONFIG_FSL_CAAM=y
67 CONFIG_SYS_FSL_DDR3=y
68 CONFIG_DDR_ECC=y
69 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
70 CONFIG_DM_I2C=y
71 CONFIG_SPL_SYS_I2C_LEGACY=y
72 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
73 CONFIG_SYS_I2C_FSL=y
74 CONFIG_SYS_FSL_I2C_OFFSET=0x118000
75 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
76 CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
77 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
78 CONFIG_FSL_ESDHC=y
79 CONFIG_MTD=y
80 CONFIG_MTD_NOR_FLASH=y
81 CONFIG_FLASH_CFI_DRIVER=y
82 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
83 CONFIG_FLASH_CFI_MTD=y
84 CONFIG_SYS_FLASH_CFI=y
85 CONFIG_DM_SPI_FLASH=y
86 CONFIG_SF_DEFAULT_SPEED=10000000
87 CONFIG_SPI_FLASH_STMICRO=y
88 CONFIG_PHYLIB=y
89 CONFIG_PHY_AQUANTIA=y
90 CONFIG_PHY_REALTEK=y
91 CONFIG_DM_ETH=y
92 CONFIG_DM_MDIO=y
93 CONFIG_E1000=y
94 CONFIG_FMAN_ENET=y
95 CONFIG_SYS_FMAN_FW_ADDR=0x104000
96 CONFIG_MII=y
97 CONFIG_PCIE_FSL=y
98 CONFIG_SYS_QE_FW_ADDR=0x124000
99 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
100 CONFIG_DM_RTC=y
101 CONFIG_SYS_NS16550=y
102 CONFIG_SPI=y
103 CONFIG_DM_SPI=y
104 CONFIG_FSL_ESPI=y
105 CONFIG_USB=y
106 CONFIG_USB_EHCI_FSL=y
107 CONFIG_USB_STORAGE=y
108 CONFIG_ADDR_MAP=y
109 CONFIG_SYS_NUM_ADDR_MAP=64