armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfig
[platform/kernel/u-boot.git] / configs / P1022DS_NAND_defconfig
1 CONFIG_PPC=y
2 CONFIG_SPL_SERIAL_SUPPORT=y
3 CONFIG_TPL_LIBCOMMON_SUPPORT=y
4 CONFIG_TPL_LIBGENERIC_SUPPORT=y
5 CONFIG_SPL_NAND_SUPPORT=y
6 CONFIG_MPC85xx=y
7 CONFIG_TARGET_P1022DS=y
8 CONFIG_FIT=y
9 CONFIG_FIT_VERBOSE=y
10 CONFIG_OF_BOARD_SETUP=y
11 CONFIG_OF_STDOUT_VIA_ALIAS=y
12 CONFIG_BOOTDELAY=10
13 CONFIG_BOARD_EARLY_INIT_F=y
14 CONFIG_SPL=y
15 CONFIG_TPL=y
16 CONFIG_TPL_ENV_SUPPORT=y
17 CONFIG_TPL_I2C_SUPPORT=y
18 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
19 CONFIG_TPL_NAND_SUPPORT=y
20 CONFIG_TPL_SERIAL_SUPPORT=y
21 CONFIG_HUSH_PARSER=y
22 CONFIG_CMD_REGINFO=y
23 CONFIG_CMD_IMLS=y
24 CONFIG_CMD_I2C=y
25 CONFIG_CMD_MMC=y
26 CONFIG_CMD_NAND=y
27 CONFIG_CMD_PCI=y
28 CONFIG_CMD_SF=y
29 CONFIG_CMD_USB=y
30 CONFIG_CMD_MII=y
31 CONFIG_CMD_PING=y
32 # CONFIG_CMD_HASH is not set
33 CONFIG_CMD_EXT2=y
34 CONFIG_CMD_FAT=y
35 CONFIG_CMD_MTDPARTS=y
36 CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor"
37 CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
38 CONFIG_ENV_IS_IN_NAND=y
39 CONFIG_MTD_NOR_FLASH=y
40 CONFIG_NAND=y
41 CONFIG_SPI_FLASH=y
42 CONFIG_SPI_FLASH_SPANSION=y
43 CONFIG_PHYLIB=y
44 CONFIG_NETDEVICES=y
45 CONFIG_PHY_GIGE=y
46 CONFIG_E1000=y
47 CONFIG_SYS_NS16550=y
48 CONFIG_FSL_ESPI=y
49 CONFIG_USB=y
50 CONFIG_USB_STORAGE=y
51 CONFIG_OF_LIBFDT=y