2 CONFIG_SYS_TEXT_BASE=0x11000000
3 CONFIG_SYS_MALLOC_LEN=0x100000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_ENV_OFFSET=0x100000
8 CONFIG_ENV_SECT_SIZE=0x10000
9 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
10 CONFIG_SPL_TEXT_BASE=0xD0000000
12 CONFIG_SPL_DRIVERS_MISC=y
14 CONFIG_SPL_SPI_FLASH_SUPPORT=y
17 CONFIG_TARGET_P1010RDB_PB=y
18 CONFIG_ENABLE_36BIT_PHYS=y
19 CONFIG_SYS_MPC85XX_NO_RESETVEC=y
20 CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y
25 CONFIG_OF_BOARD_SETUP=y
26 CONFIG_OF_STDOUT_VIA_ALIAS=y
29 CONFIG_USE_BOOTCOMMAND=y
30 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
31 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
32 CONFIG_BOARD_EARLY_INIT_F=y
33 CONFIG_BOARD_EARLY_INIT_R=y
35 # CONFIG_SPL_FRAMEWORK is not set
36 CONFIG_SPL_MAX_SIZE=0x18000
38 CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
39 CONFIG_SPL_FLUSH_IMAGE=y
40 CONFIG_SPL_GD_ADDR=0xd0018000
41 CONFIG_SPL_RELOC_TEXT_BASE=0xd0000000
42 CONFIG_SPL_RELOC_STACK=0xd001c000
43 CONFIG_SPL_RELOC_MALLOC=y
44 CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000
45 CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000
46 CONFIG_SPL_ENV_SUPPORT=y
48 CONFIG_SPL_MPC8XXX_INIT_DDR=y
49 CONFIG_SPL_TARGET="u-boot-with-spl.bin"
53 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
54 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
62 CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
63 CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
65 CONFIG_ENV_OVERWRITE=y
66 CONFIG_ENV_IS_IN_SPI_FLASH=y
67 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
69 CONFIG_BOOTFILE="uImage"
71 CONFIG_ETHPRIME="eTSEC1"
74 CONFIG_SYS_SATA_MAX_DEVICE=2
76 CONFIG_DDR_CLK_FREQ=66666666
77 CONFIG_SYS_SPD_BUS_NUM=1
78 CONFIG_CHIP_SELECTS_PER_CTRL=1
79 CONFIG_SYS_DDR_RAW_TIMING=y
80 CONFIG_SPL_COMMON_INIT_DDR=y
82 CONFIG_SPL_SYS_I2C_LEGACY=y
83 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
85 CONFIG_SYS_FSL_I2C_OFFSET=0x3000
86 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
87 CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
88 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
91 CONFIG_MTD_NOR_FLASH=y
92 CONFIG_FLASH_CFI_DRIVER=y
93 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
94 CONFIG_SYS_FLASH_CFI=y
96 CONFIG_SF_DEFAULT_SPEED=10000000
97 CONFIG_SPI_FLASH_SPANSION=y
120 CONFIG_USB_EHCI_FSL=y