2 CONFIG_SYS_TEXT_BASE=0x11001000
3 CONFIG_SYS_MALLOC_LEN=0x100000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
8 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
9 CONFIG_SPL_TEXT_BASE=0xD0001000
12 CONFIG_SPL_DRIVERS_MISC=y
15 CONFIG_TARGET_P1010RDB_PB=y
18 CONFIG_OF_BOARD_SETUP=y
19 CONFIG_OF_STDOUT_VIA_ALIAS=y
20 CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
22 CONFIG_USE_BOOTCOMMAND=y
23 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
24 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
25 CONFIG_BOARD_EARLY_INIT_F=y
26 CONFIG_BOARD_EARLY_INIT_R=y
28 # CONFIG_SPL_FRAMEWORK is not set
30 CONFIG_SPL_ENV_SUPPORT=y
32 CONFIG_SPL_MPC8XXX_INIT_DDR=y
35 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
36 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
44 CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
45 CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
47 CONFIG_ENV_OVERWRITE=y
48 CONFIG_ENV_IS_IN_MMC=y
49 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
52 CONFIG_DDR_CLK_FREQ=66666666
54 CONFIG_SPL_SYS_I2C_LEGACY=y
55 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
57 CONFIG_SYS_FSL_I2C_OFFSET=0x3000
58 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
59 CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
60 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
63 CONFIG_MTD_NOR_FLASH=y
64 CONFIG_FLASH_CFI_DRIVER=y
65 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
66 CONFIG_SYS_FLASH_CFI=y
68 CONFIG_SF_DEFAULT_SPEED=10000000
69 CONFIG_SPI_FLASH_SPANSION=y