2 CONFIG_SYS_TEXT_BASE=0x11001000
3 CONFIG_SYS_MALLOC_LEN=0x100000
5 CONFIG_ENV_OFFSET=0x100000
6 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
7 CONFIG_SPL_TEXT_BASE=0xFF800000
9 CONFIG_TPL_TEXT_BASE=0xD0001000
10 CONFIG_TPL_LIBCOMMON_SUPPORT=y
11 CONFIG_TPL_LIBGENERIC_SUPPORT=y
12 CONFIG_SPL_DRIVERS_MISC=y
15 CONFIG_TARGET_P1010RDB_PA=y
17 CONFIG_SYS_CUSTOM_LDSCRIPT=y
18 CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
21 CONFIG_OF_BOARD_SETUP=y
22 CONFIG_OF_STDOUT_VIA_ALIAS=y
24 CONFIG_USE_BOOTCOMMAND=y
25 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
26 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
27 CONFIG_BOARD_EARLY_INIT_F=y
28 CONFIG_BOARD_EARLY_INIT_R=y
29 # CONFIG_SPL_FRAMEWORK is not set
30 CONFIG_SPL_NAND_BOOT=y
31 CONFIG_SPL_NAND_SUPPORT=y
33 CONFIG_TPL_DRIVERS_MISC=y
34 CONFIG_TPL_ENV_SUPPORT=y
36 CONFIG_TPL_MPC8XXX_INIT_DDR=y
37 CONFIG_TPL_NAND_SUPPORT=y
41 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
42 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
50 CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
51 CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
53 CONFIG_ENV_OVERWRITE=y
54 CONFIG_ENV_IS_IN_NAND=y
55 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
58 CONFIG_DDR_CLK_FREQ=66666666
60 CONFIG_SPL_SYS_I2C_LEGACY=y
61 CONFIG_TPL_SYS_I2C_LEGACY=y
62 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
64 CONFIG_SYS_FSL_I2C_OFFSET=0x3000
65 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
66 CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
69 CONFIG_MTD_NOR_FLASH=y
70 CONFIG_FLASH_CFI_DRIVER=y
71 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
72 CONFIG_SYS_FLASH_CFI=y
76 CONFIG_SF_DEFAULT_SPEED=10000000
77 CONFIG_SPI_FLASH_SPANSION=y
100 CONFIG_USB_EHCI_FSL=y