pico-imx7d: Add SPL support
[platform/kernel/u-boot.git] / configs / Colombus_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_SUNXI=y
3 CONFIG_SPL=y
4 CONFIG_MACH_SUN6I=y
5 CONFIG_DRAM_CLK=240
6 CONFIG_DRAM_ZQ=251
7 CONFIG_USB1_VBUS_PIN=""
8 CONFIG_I2C0_ENABLE=y
9 CONFIG_AXP_GPIO=y
10 CONFIG_VIDEO_LCD_MODE="x:2048,y:1536,depth:24,pclk_khz:208000,le:5,ri:150,up:9,lo:24,hs:5,vs:1,sync:3,vmode:0"
11 CONFIG_VIDEO_LCD_DCLK_PHASE=0
12 CONFIG_VIDEO_LCD_POWER="PH27"
13 CONFIG_VIDEO_LCD_BL_EN="PM1"
14 CONFIG_VIDEO_LCD_BL_PWM="PH13"
15 CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23"
16 CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
17 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
18 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
19 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
20 # CONFIG_CMD_FLASH is not set
21 # CONFIG_SPL_DOS_PARTITION is not set
22 # CONFIG_SPL_EFI_PARTITION is not set
23 CONFIG_ETH_DESIGNWARE=y
24 CONFIG_RGMII=y
25 CONFIG_SUN7I_GMAC=y
26 CONFIG_AXP_ALDO1_VOLT=3300
27 CONFIG_USB_EHCI_HCD=y
28 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y