lib: optee: Remove CONFIG_OPTEE_LOAD_ADDR
[platform/kernel/u-boot.git] / configs / Colombus_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_SUNXI=y
3 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
4 CONFIG_SPL=y
5 CONFIG_MACH_SUN6I=y
6 CONFIG_DRAM_CLK=240
7 CONFIG_DRAM_ZQ=251
8 CONFIG_USB1_VBUS_PIN=""
9 CONFIG_I2C0_ENABLE=y
10 CONFIG_AXP_GPIO=y
11 CONFIG_VIDEO_LCD_MODE="x:2048,y:1536,depth:24,pclk_khz:208000,le:5,ri:150,up:9,lo:24,hs:5,vs:1,sync:3,vmode:0"
12 CONFIG_VIDEO_LCD_DCLK_PHASE=0
13 CONFIG_VIDEO_LCD_POWER="PH27"
14 CONFIG_VIDEO_LCD_BL_EN="PM1"
15 CONFIG_VIDEO_LCD_BL_PWM="PH13"
16 CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23"
17 CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
18 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
19 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
20 CONFIG_SYS_I2C_LEGACY=y
21 CONFIG_SPL_SYS_I2C_LEGACY=y
22 CONFIG_SYS_I2C_SOFT=y
23 CONFIG_SYS_I2C_SOFT_SPEED=50000
24 CONFIG_SYS_I2C_SOFT_SLAVE=0x00
25 CONFIG_SYS_I2C_MVTWSI=y
26 CONFIG_SYS_I2C_SLAVE=0x7f
27 CONFIG_SYS_I2C_SPEED=400000
28 CONFIG_PHY_REALTEK=y
29 CONFIG_ETH_DESIGNWARE=y
30 CONFIG_RGMII=y
31 CONFIG_MII=y
32 CONFIG_SUN7I_GMAC=y
33 CONFIG_AXP_ALDO1_VOLT=3300
34 CONFIG_USB_EHCI_HCD=y
35 CONFIG_USB_OHCI_HCD=y