arm: bcmbca: replace ARCH_BCM63158 symbols in Kconfig with BCM63158
[platform/kernel/u-boot.git] / configs / Colombus_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_SUNXI=y
3 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
4 CONFIG_SPL=y
5 CONFIG_MACH_SUN6I=y
6 CONFIG_DRAM_CLK=240
7 CONFIG_DRAM_ZQ=251
8 CONFIG_USB1_VBUS_PIN=""
9 CONFIG_I2C0_ENABLE=y
10 CONFIG_AXP_GPIO=y
11 CONFIG_VIDEO_LCD_MODE="x:2048,y:1536,depth:24,pclk_khz:208000,le:5,ri:150,up:9,lo:24,hs:5,vs:1,sync:3,vmode:0"
12 CONFIG_VIDEO_LCD_DCLK_PHASE=0
13 CONFIG_VIDEO_LCD_POWER="PH27"
14 CONFIG_VIDEO_LCD_BL_EN="PM1"
15 CONFIG_VIDEO_LCD_BL_PWM="PH13"
16 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
17 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
18 CONFIG_SPL_SYS_I2C_LEGACY=y
19 CONFIG_SYS_I2C_MVTWSI=y
20 CONFIG_SYS_I2C_SLAVE=0x7f
21 CONFIG_SYS_I2C_SPEED=400000
22 CONFIG_PHY_REALTEK=y
23 CONFIG_ETH_DESIGNWARE=y
24 CONFIG_RGMII=y
25 CONFIG_MII=y
26 CONFIG_SUN7I_GMAC=y
27 CONFIG_AXP_ALDO1_VOLT=3300
28 CONFIG_USB_EHCI_HCD=y
29 CONFIG_USB_OHCI_HCD=y