vbe: Support selecting operations by SPL phase
[platform/kernel/u-boot.git] / configs / CHIP_pro_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_SUNXI=y
3 CONFIG_DEFAULT_DEVICE_TREE="sun5i-gr8-chip-pro"
4 CONFIG_SPL=y
5 CONFIG_MACH_SUN5I=y
6 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
7 CONFIG_USB0_VBUS_PIN="PB10"
8 CONFIG_SPL_I2C=y
9 # CONFIG_CMD_FLASH is not set
10 CONFIG_CMD_MTDPARTS=y
11 CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"
12 CONFIG_MTDPARTS_DEFAULT="mtdparts=sunxi-nand.0:256k(spl),256k(spl-backup),2m(uboot),2m(uboot-backup),-(UBI)"
13 CONFIG_ENV_IS_IN_UBI=y
14 CONFIG_ENV_UBI_PART="UBI"
15 CONFIG_ENV_UBI_VOLUME="uboot-env"
16 CONFIG_SYS_I2C_MVTWSI=y
17 CONFIG_SYS_I2C_SLAVE=0x7f
18 CONFIG_SYS_I2C_SPEED=400000
19 # CONFIG_MMC is not set
20 CONFIG_MTD=y
21 CONFIG_MTD_RAW_NAND=y
22 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
23 CONFIG_SYS_NAND_ONFI_DETECTION=y
24 CONFIG_SYS_NAND_PAGE_SIZE=0x1000
25 CONFIG_SYS_NAND_OOBSIZE=0x100
26 CONFIG_AXP_ALDO3_VOLT=3300
27 CONFIG_AXP_ALDO4_VOLT=3300
28 CONFIG_CONS_INDEX=2
29 CONFIG_USB_EHCI_HCD=y
30 CONFIG_USB_OHCI_HCD=y
31 CONFIG_USB_MUSB_GADGET=y
32 CONFIG_USB_FUNCTION_MASS_STORAGE=y