sunxi: Convert CONFIG_SATAPWR to Kconfig
[platform/kernel/u-boot.git] / configs / A20-OLinuXino-Lime_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_SUNXI=y
3 CONFIG_MACH_SUN7I=y
4 CONFIG_DRAM_CLK=384
5 CONFIG_MMC0_CD_PIN="PH1"
6 CONFIG_SATAPWR="PC3"
7 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
8 CONFIG_AHCI=y
9 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
10 CONFIG_SPL=y
11 CONFIG_SPL_I2C_SUPPORT=y
12 # CONFIG_CMD_IMLS is not set
13 # CONFIG_CMD_FLASH is not set
14 # CONFIG_CMD_FPGA is not set
15 # CONFIG_SPL_DOS_PARTITION is not set
16 # CONFIG_SPL_ISO_PARTITION is not set
17 # CONFIG_SPL_EFI_PARTITION is not set
18 CONFIG_ETH_DESIGNWARE=y
19 CONFIG_NET_ETHADDR_EEPROM=y
20 CONFIG_NET_ETHADDR_EEPROM_I2C=y
21 CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
22 CONFIG_I2C1_ENABLE=y
23 CONFIG_SUN7I_GMAC=y
24 CONFIG_AXP_ALDO3_VOLT=2800
25 CONFIG_AXP_ALDO4_VOLT=2800
26 CONFIG_USB_EHCI_HCD=y