sunxi: Enable LDO3 at 3.3V on A13-OLinuXino board
[platform/kernel/u-boot.git] / configs / A13-OLinuXino_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_SUNXI=y
3 CONFIG_MACH_SUN5I=y
4 CONFIG_DRAM_CLK=408
5 CONFIG_DRAM_EMR1=0
6 CONFIG_MMC0_CD_PIN="PG0"
7 CONFIG_USB0_VBUS_DET="PG1"
8 CONFIG_USB1_VBUS_PIN="PG11"
9 CONFIG_AXP_GPIO=y
10 # CONFIG_VIDEO_HDMI is not set
11 CONFIG_VIDEO_VGA_VIA_LCD=y
12 CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
13 CONFIG_VIDEO_LCD_POWER="AXP0-0"
14 CONFIG_VIDEO_LCD_BL_PWM="PB2"
15 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
16 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
17 CONFIG_SPL=y
18 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
19 CONFIG_HUSH_PARSER=y
20 CONFIG_CMD_BOOTZ=y
21 # CONFIG_CMD_IMLS is not set
22 # CONFIG_CMD_FLASH is not set
23 CONFIG_CMD_MMC=y
24 CONFIG_CMD_I2C=y
25 CONFIG_CMD_DFU=y
26 CONFIG_CMD_USB_MASS_STORAGE=y
27 # CONFIG_CMD_FPGA is not set
28 CONFIG_CMD_DHCP=y
29 CONFIG_CMD_MII=y
30 CONFIG_CMD_PING=y
31 CONFIG_CMD_EXT2=y
32 CONFIG_CMD_EXT4=y
33 CONFIG_CMD_FAT=y
34 CONFIG_CMD_FS_GENERIC=y
35 CONFIG_AXP_ALDO3_VOLT=3300
36 CONFIG_USB_EHCI_HCD=y
37 CONFIG_USB_MUSB_GADGET=y
38 CONFIG_USB_GADGET=y
39 CONFIG_USB_GADGET_DOWNLOAD=y
40 CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
41 CONFIG_G_DNL_VENDOR_NUM=0x1f3a
42 CONFIG_G_DNL_PRODUCT_NUM=0x1010