common/usb_storage.c

   1 /*
   2  * Most of this source has been derived from the Linux USB
   3  * project:
   4  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   5  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
   6  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
   7  *   (c) 2000 Yggdrasil Computing, Inc.
   8  *
   9  *
  10  * Adapted for U-Boot:
  11  *   (C) Copyright 2001 Denis Peter, MPL AG Switzerland
  12  * Driver model conversion:
  13  *   (C) Copyright 2015 Google, Inc
  14  *
  15  * For BBB support (C) Copyright 2003
  16  * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
  17  *
  18  * BBB support based on /sys/dev/usb/umass.c from
  19  * FreeBSD.
  20  *
  21  * SPDX-License-Identifier:     GPL-2.0+
  22  */
  23
  24 /* Note:
  25  * Currently only the CBI transport protocoll has been implemented, and it
  26  * is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB
  27  * transport protocoll may work as well.
  28  */
  29 /*
  30  * New Note:
  31  * Support for USB Mass Storage Devices (BBB) has been added. It has
  32  * only been tested with USB memory sticks.
  33  */
  34
  35
  36 #include <common.h>
  37 #include <command.h>
  38 #include <dm.h>
  39 #include <errno.h>
  40 #include <inttypes.h>
  41 #include <mapmem.h>
  42 #include <asm/byteorder.h>
  43 #include <asm/processor.h>
  44 #include <dm/device-internal.h>
  45
  46 #include <part.h>
  47 #include <usb.h>
  48
  49 #undef BBB_COMDAT_TRACE
  50 #undef BBB_XPORT_TRACE
  51
  52 #include <scsi.h>
  53 /* direction table -- this indicates the direction of the data
  54  * transfer for each command code -- a 1 indicates input
  55  */
  56 static const unsigned char us_direction[256/8] = {
  57         0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
  58         0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
  59         0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
  60         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
  61 };
  62 #define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
  63
  64 static ccb usb_ccb __attribute__((aligned(ARCH_DMA_MINALIGN)));
  65 static __u32 CBWTag;
  66
  67 #define USB_MAX_STOR_DEV 5
  68 static int usb_max_devs; /* number of highest available usb device */
  69
  70 static block_dev_desc_t usb_dev_desc[USB_MAX_STOR_DEV];
  71
  72 struct us_data;
  73 typedef int (*trans_cmnd)(ccb *cb, struct us_data *data);
  74 typedef int (*trans_reset)(struct us_data *data);
  75
  76 struct us_data {
  77         struct usb_device *pusb_dev;     /* this usb_device */
  78
  79         unsigned int    flags;                  /* from filter initially */
  80 #       define USB_READY        (1 << 0)
  81         unsigned char   ifnum;                  /* interface number */
  82         unsigned char   ep_in;                  /* in endpoint */
  83         unsigned char   ep_out;                 /* out ....... */
  84         unsigned char   ep_int;                 /* interrupt . */
  85         unsigned char   subclass;               /* as in overview */
  86         unsigned char   protocol;               /* .............. */
  87         unsigned char   attention_done;         /* force attn on first cmd */
  88         unsigned short  ip_data;                /* interrupt data */
  89         int             action;                 /* what to do */
  90         int             ip_wanted;              /* needed */
  91         int             *irq_handle;            /* for USB int requests */
  92         unsigned int    irqpipe;                /* pipe for release_irq */
  93         unsigned char   irqmaxp;                /* max packed for irq Pipe */
  94         unsigned char   irqinterval;            /* Intervall for IRQ Pipe */
  95         ccb             *srb;                   /* current srb */
  96         trans_reset     transport_reset;        /* reset routine */
  97         trans_cmnd      transport;              /* transport routine */
  98 };
  99
 100 #ifdef CONFIG_USB_EHCI
 101 /*
 102  * The U-Boot EHCI driver can handle any transfer length as long as there is
 103  * enough free heap space left, but the SCSI READ(10) and WRITE(10) commands are
 104  * limited to 65535 blocks.
 105  */
 106 #define USB_MAX_XFER_BLK        65535
 107 #else
 108 #define USB_MAX_XFER_BLK        20
 109 #endif
 110
 111 static struct us_data usb_stor[USB_MAX_STOR_DEV];
 112
 113 #define USB_STOR_TRANSPORT_GOOD    0
 114 #define USB_STOR_TRANSPORT_FAILED -1
 115 #define USB_STOR_TRANSPORT_ERROR  -2
 116
 117 int usb_stor_get_info(struct usb_device *dev, struct us_data *us,
 118                       block_dev_desc_t *dev_desc);
 119 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
 120                       struct us_data *ss);
 121 unsigned long usb_stor_read(int device, lbaint_t blknr,
 122                             lbaint_t blkcnt, void *buffer);
 123 unsigned long usb_stor_write(int device, lbaint_t blknr,
 124                              lbaint_t blkcnt, const void *buffer);
 125 void uhci_show_temp_int_td(void);
 126
 127 #ifdef CONFIG_PARTITIONS
 128 block_dev_desc_t *usb_stor_get_dev(int index)
 129 {
 130         return (index < usb_max_devs) ? &usb_dev_desc[index] : NULL;
 131 }
 132 #endif
 133
 134 static void usb_show_progress(void)
 135 {
 136         debug(".");
 137 }
 138
 139 /*******************************************************************************
 140  * show info on storage devices; 'usb start/init' must be invoked earlier
 141  * as we only retrieve structures populated during devices initialization
 142  */
 143 int usb_stor_info(void)
 144 {
 145         int i;
 146
 147         if (usb_max_devs > 0) {
 148                 for (i = 0; i < usb_max_devs; i++) {
 149                         printf("  Device %d: ", i);
 150                         dev_print(&usb_dev_desc[i]);
 151                 }
 152                 return 0;
 153         }
 154
 155         printf("No storage devices, perhaps not 'usb start'ed..?\n");
 156         return 1;
 157 }
 158
 159 static unsigned int usb_get_max_lun(struct us_data *us)
 160 {
 161         int len;
 162         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, result, 1);
 163         len = usb_control_msg(us->pusb_dev,
 164                               usb_rcvctrlpipe(us->pusb_dev, 0),
 165                               US_BBB_GET_MAX_LUN,
 166                               USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 167                               0, us->ifnum,
 168                               result, sizeof(char),
 169                               USB_CNTL_TIMEOUT * 5);
 170         debug("Get Max LUN -> len = %i, result = %i\n", len, (int) *result);
 171         return (len > 0) ? *result : 0;
 172 }
 173
 174 static int usb_stor_probe_device(struct usb_device *dev)
 175 {
 176         if (dev == NULL)
 177                 return -ENOENT; /* no more devices available */
 178
 179         debug("\n\nProbing for storage\n");
 180         if (usb_storage_probe(dev, 0, &usb_stor[usb_max_devs])) {
 181                 /* OK, it's a storage device.  Iterate over its LUNs
 182                         * and populate `usb_dev_desc'.
 183                         */
 184                 int lun, max_lun, start = usb_max_devs;
 185
 186                 max_lun = usb_get_max_lun(&usb_stor[usb_max_devs]);
 187                 for (lun = 0;
 188                         lun <= max_lun && usb_max_devs < USB_MAX_STOR_DEV;
 189                         lun++) {
 190                         struct block_dev_desc *blkdev;
 191
 192                         blkdev = &usb_dev_desc[usb_max_devs];
 193                         memset(blkdev, '\0', sizeof(block_dev_desc_t));
 194                         blkdev->if_type = IF_TYPE_USB;
 195                         blkdev->dev = usb_max_devs;
 196                         blkdev->part_type = PART_TYPE_UNKNOWN;
 197                         blkdev->target = 0xff;
 198                         blkdev->type = DEV_TYPE_UNKNOWN;
 199                         blkdev->block_read = usb_stor_read;
 200                         blkdev->block_write = usb_stor_write;
 201                         blkdev->lun = lun;
 202                         blkdev->priv = dev;
 203
 204                         if (usb_stor_get_info(dev, &usb_stor[start],
 205                                               &usb_dev_desc[usb_max_devs]) ==
 206                                               1) {
 207                                 usb_max_devs++;
 208                                 debug("%s: Found device %p\n", __func__, dev);
 209                         }
 210                 }
 211         }
 212
 213         /* if storage device */
 214         if (usb_max_devs == USB_MAX_STOR_DEV) {
 215                 printf("max USB Storage Device reached: %d stopping\n",
 216                        usb_max_devs);
 217                 return -ENOSPC;
 218         }
 219
 220         return 0;
 221 }
 222
 223 void usb_stor_reset(void)
 224 {
 225         usb_max_devs = 0;
 226 }
 227
 228 #ifndef CONFIG_DM_USB
 229 /*******************************************************************************
 230  * scan the usb and reports device info
 231  * to the user if mode = 1
 232  * returns current device or -1 if no
 233  */
 234 int usb_stor_scan(int mode)
 235 {
 236         unsigned char i;
 237
 238         if (mode == 1)
 239                 printf("       scanning usb for storage devices... ");
 240
 241         usb_disable_asynch(1); /* asynch transfer not allowed */
 242
 243         usb_stor_reset();
 244         for (i = 0; i < USB_MAX_DEVICE; i++) {
 245                 struct usb_device *dev;
 246
 247                 dev = usb_get_dev_index(i); /* get device */
 248                 debug("i=%d\n", i);
 249                 if (usb_stor_probe_device(dev))
 250                         break;
 251         } /* for */
 252
 253         usb_disable_asynch(0); /* asynch transfer allowed */
 254         printf("%d Storage Device(s) found\n", usb_max_devs);
 255         if (usb_max_devs > 0)
 256                 return 0;
 257         return -1;
 258 }
 259 #endif
 260
 261 static int usb_stor_irq(struct usb_device *dev)
 262 {
 263         struct us_data *us;
 264         us = (struct us_data *)dev->privptr;
 265
 266         if (us->ip_wanted)
 267                 us->ip_wanted = 0;
 268         return 0;
 269 }
 270
 271
 272 #ifdef  DEBUG
 273
 274 static void usb_show_srb(ccb *pccb)
 275 {
 276         int i;
 277         printf("SRB: len %d datalen 0x%lX\n ", pccb->cmdlen, pccb->datalen);
 278         for (i = 0; i < 12; i++)
 279                 printf("%02X ", pccb->cmd[i]);
 280         printf("\n");
 281 }
 282
 283 static void display_int_status(unsigned long tmp)
 284 {
 285         printf("Status: %s %s %s %s %s %s %s\n",
 286                 (tmp & USB_ST_ACTIVE) ? "Active" : "",
 287                 (tmp & USB_ST_STALLED) ? "Stalled" : "",
 288                 (tmp & USB_ST_BUF_ERR) ? "Buffer Error" : "",
 289                 (tmp & USB_ST_BABBLE_DET) ? "Babble Det" : "",
 290                 (tmp & USB_ST_NAK_REC) ? "NAKed" : "",
 291                 (tmp & USB_ST_CRC_ERR) ? "CRC Error" : "",
 292                 (tmp & USB_ST_BIT_ERR) ? "Bitstuff Error" : "");
 293 }
 294 #endif
 295 /***********************************************************************
 296  * Data transfer routines
 297  ***********************************************************************/
 298
 299 static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length)
 300 {
 301         int max_size;
 302         int this_xfer;
 303         int result;
 304         int partial;
 305         int maxtry;
 306         int stat;
 307
 308         /* determine the maximum packet size for these transfers */
 309         max_size = usb_maxpacket(us->pusb_dev, pipe) * 16;
 310
 311         /* while we have data left to transfer */
 312         while (length) {
 313
 314                 /* calculate how long this will be -- maximum or a remainder */
 315                 this_xfer = length > max_size ? max_size : length;
 316                 length -= this_xfer;
 317
 318                 /* setup the retry counter */
 319                 maxtry = 10;
 320
 321                 /* set up the transfer loop */
 322                 do {
 323                         /* transfer the data */
 324                         debug("Bulk xfer 0x%lx(%d) try #%d\n",
 325                               (ulong)map_to_sysmem(buf), this_xfer,
 326                               11 - maxtry);
 327                         result = usb_bulk_msg(us->pusb_dev, pipe, buf,
 328                                               this_xfer, &partial,
 329                                               USB_CNTL_TIMEOUT * 5);
 330                         debug("bulk_msg returned %d xferred %d/%d\n",
 331                               result, partial, this_xfer);
 332                         if (us->pusb_dev->status != 0) {
 333                                 /* if we stall, we need to clear it before
 334                                  * we go on
 335                                  */
 336 #ifdef DEBUG
 337                                 display_int_status(us->pusb_dev->status);
 338 #endif
 339                                 if (us->pusb_dev->status & USB_ST_STALLED) {
 340                                         debug("stalled ->clearing endpoint" \
 341                                               "halt for pipe 0x%x\n", pipe);
 342                                         stat = us->pusb_dev->status;
 343                                         usb_clear_halt(us->pusb_dev, pipe);
 344                                         us->pusb_dev->status = stat;
 345                                         if (this_xfer == partial) {
 346                                                 debug("bulk transferred" \
 347                                                       "with error %lX," \
 348                                                       " but data ok\n",
 349                                                       us->pusb_dev->status);
 350                                                 return 0;
 351                                         }
 352                                         else
 353                                                 return result;
 354                                 }
 355                                 if (us->pusb_dev->status & USB_ST_NAK_REC) {
 356                                         debug("Device NAKed bulk_msg\n");
 357                                         return result;
 358                                 }
 359                                 debug("bulk transferred with error");
 360                                 if (this_xfer == partial) {
 361                                         debug(" %ld, but data ok\n",
 362                                               us->pusb_dev->status);
 363                                         return 0;
 364                                 }
 365                                 /* if our try counter reaches 0, bail out */
 366                                         debug(" %ld, data %d\n",
 367                                               us->pusb_dev->status, partial);
 368                                 if (!maxtry--)
 369                                                 return result;
 370                         }
 371                         /* update to show what data was transferred */
 372                         this_xfer -= partial;
 373                         buf += partial;
 374                         /* continue until this transfer is done */
 375                 } while (this_xfer);
 376         }
 377
 378         /* if we get here, we're done and successful */
 379         return 0;
 380 }
 381
 382 static int usb_stor_BBB_reset(struct us_data *us)
 383 {
 384         int result;
 385         unsigned int pipe;
 386
 387         /*
 388          * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
 389          *
 390          * For Reset Recovery the host shall issue in the following order:
 391          * a) a Bulk-Only Mass Storage Reset
 392          * b) a Clear Feature HALT to the Bulk-In endpoint
 393          * c) a Clear Feature HALT to the Bulk-Out endpoint
 394          *
 395          * This is done in 3 steps.
 396          *
 397          * If the reset doesn't succeed, the device should be port reset.
 398          *
 399          * This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
 400          */
 401         debug("BBB_reset\n");
 402         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 403                                  US_BBB_RESET,
 404                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 405                                  0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5);
 406
 407         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 408                 debug("RESET:stall\n");
 409                 return -1;
 410         }
 411
 412         /* long wait for reset */
 413         mdelay(150);
 414         debug("BBB_reset result %d: status %lX reset\n",
 415               result, us->pusb_dev->status);
 416         pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 417         result = usb_clear_halt(us->pusb_dev, pipe);
 418         /* long wait for reset */
 419         mdelay(150);
 420         debug("BBB_reset result %d: status %lX clearing IN endpoint\n",
 421               result, us->pusb_dev->status);
 422         /* long wait for reset */
 423         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 424         result = usb_clear_halt(us->pusb_dev, pipe);
 425         mdelay(150);
 426         debug("BBB_reset result %d: status %lX clearing OUT endpoint\n",
 427               result, us->pusb_dev->status);
 428         debug("BBB_reset done\n");
 429         return 0;
 430 }
 431
 432 /* FIXME: this reset function doesn't really reset the port, and it
 433  * should. Actually it should probably do what it's doing here, and
 434  * reset the port physically
 435  */
 436 static int usb_stor_CB_reset(struct us_data *us)
 437 {
 438         unsigned char cmd[12];
 439         int result;
 440
 441         debug("CB_reset\n");
 442         memset(cmd, 0xff, sizeof(cmd));
 443         cmd[0] = SCSI_SEND_DIAG;
 444         cmd[1] = 4;
 445         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 446                                  US_CBI_ADSC,
 447                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 448                                  0, us->ifnum, cmd, sizeof(cmd),
 449                                  USB_CNTL_TIMEOUT * 5);
 450
 451         /* long wait for reset */
 452         mdelay(1500);
 453         debug("CB_reset result %d: status %lX clearing endpoint halt\n",
 454               result, us->pusb_dev->status);
 455         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in));
 456         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out));
 457
 458         debug("CB_reset done\n");
 459         return 0;
 460 }
 461
 462 /*
 463  * Set up the command for a BBB device. Note that the actual SCSI
 464  * command is copied into cbw.CBWCDB.
 465  */
 466 static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
 467 {
 468         int result;
 469         int actlen;
 470         int dir_in;
 471         unsigned int pipe;
 472         ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_cbw, cbw, 1);
 473
 474         dir_in = US_DIRECTION(srb->cmd[0]);
 475
 476 #ifdef BBB_COMDAT_TRACE
 477         printf("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n",
 478                 dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen,
 479                 srb->pdata);
 480         if (srb->cmdlen) {
 481                 for (result = 0; result < srb->cmdlen; result++)
 482                         printf("cmd[%d] %#x ", result, srb->cmd[result]);
 483                 printf("\n");
 484         }
 485 #endif
 486         /* sanity checks */
 487         if (!(srb->cmdlen <= CBWCDBLENGTH)) {
 488                 debug("usb_stor_BBB_comdat:cmdlen too large\n");
 489                 return -1;
 490         }
 491
 492         /* always OUT to the ep */
 493         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 494
 495         cbw->dCBWSignature = cpu_to_le32(CBWSIGNATURE);
 496         cbw->dCBWTag = cpu_to_le32(CBWTag++);
 497         cbw->dCBWDataTransferLength = cpu_to_le32(srb->datalen);
 498         cbw->bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
 499         cbw->bCBWLUN = srb->lun;
 500         cbw->bCDBLength = srb->cmdlen;
 501         /* copy the command data into the CBW command data buffer */
 502         /* DST SRC LEN!!! */
 503
 504         memcpy(cbw->CBWCDB, srb->cmd, srb->cmdlen);
 505         result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE,
 506                               &actlen, USB_CNTL_TIMEOUT * 5);
 507         if (result < 0)
 508                 debug("usb_stor_BBB_comdat:usb_bulk_msg error\n");
 509         return result;
 510 }
 511
 512 /* FIXME: we also need a CBI_command which sets up the completion
 513  * interrupt, and waits for it
 514  */
 515 static int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
 516 {
 517         int result = 0;
 518         int dir_in, retry;
 519         unsigned int pipe;
 520         unsigned long status;
 521
 522         retry = 5;
 523         dir_in = US_DIRECTION(srb->cmd[0]);
 524
 525         if (dir_in)
 526                 pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 527         else
 528                 pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 529
 530         while (retry--) {
 531                 debug("CBI gets a command: Try %d\n", 5 - retry);
 532 #ifdef DEBUG
 533                 usb_show_srb(srb);
 534 #endif
 535                 /* let's send the command via the control pipe */
 536                 result = usb_control_msg(us->pusb_dev,
 537                                          usb_sndctrlpipe(us->pusb_dev , 0),
 538                                          US_CBI_ADSC,
 539                                          USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 540                                          0, us->ifnum,
 541                                          srb->cmd, srb->cmdlen,
 542                                          USB_CNTL_TIMEOUT * 5);
 543                 debug("CB_transport: control msg returned %d, status %lX\n",
 544                       result, us->pusb_dev->status);
 545                 /* check the return code for the command */
 546                 if (result < 0) {
 547                         if (us->pusb_dev->status & USB_ST_STALLED) {
 548                                 status = us->pusb_dev->status;
 549                                 debug(" stall during command found," \
 550                                       " clear pipe\n");
 551                                 usb_clear_halt(us->pusb_dev,
 552                                               usb_sndctrlpipe(us->pusb_dev, 0));
 553                                 us->pusb_dev->status = status;
 554                         }
 555                         debug(" error during command %02X" \
 556                               " Stat = %lX\n", srb->cmd[0],
 557                               us->pusb_dev->status);
 558                         return result;
 559                 }
 560                 /* transfer the data payload for this command, if one exists*/
 561
 562                 debug("CB_transport: control msg returned %d," \
 563                       " direction is %s to go 0x%lx\n", result,
 564                       dir_in ? "IN" : "OUT", srb->datalen);
 565                 if (srb->datalen) {
 566                         result = us_one_transfer(us, pipe, (char *)srb->pdata,
 567                                                  srb->datalen);
 568                         debug("CBI attempted to transfer data," \
 569                               " result is %d status %lX, len %d\n",
 570                               result, us->pusb_dev->status,
 571                                 us->pusb_dev->act_len);
 572                         if (!(us->pusb_dev->status & USB_ST_NAK_REC))
 573                                 break;
 574                 } /* if (srb->datalen) */
 575                 else
 576                         break;
 577         }
 578         /* return result */
 579
 580         return result;
 581 }
 582
 583
 584 static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
 585 {
 586         int timeout;
 587
 588         us->ip_wanted = 1;
 589         submit_int_msg(us->pusb_dev, us->irqpipe,
 590                         (void *) &us->ip_data, us->irqmaxp, us->irqinterval);
 591         timeout = 1000;
 592         while (timeout--) {
 593                 if (us->ip_wanted == 0)
 594                         break;
 595                 mdelay(10);
 596         }
 597         if (us->ip_wanted) {
 598                 printf("        Did not get interrupt on CBI\n");
 599                 us->ip_wanted = 0;
 600                 return USB_STOR_TRANSPORT_ERROR;
 601         }
 602         debug("Got interrupt data 0x%x, transfered %d status 0x%lX\n",
 603               us->ip_data, us->pusb_dev->irq_act_len,
 604               us->pusb_dev->irq_status);
 605         /* UFI gives us ASC and ASCQ, like a request sense */
 606         if (us->subclass == US_SC_UFI) {
 607                 if (srb->cmd[0] == SCSI_REQ_SENSE ||
 608                     srb->cmd[0] == SCSI_INQUIRY)
 609                         return USB_STOR_TRANSPORT_GOOD; /* Good */
 610                 else if (us->ip_data)
 611                         return USB_STOR_TRANSPORT_FAILED;
 612                 else
 613                         return USB_STOR_TRANSPORT_GOOD;
 614         }
 615         /* otherwise, we interpret the data normally */
 616         switch (us->ip_data) {
 617         case 0x0001:
 618                 return USB_STOR_TRANSPORT_GOOD;
 619         case 0x0002:
 620                 return USB_STOR_TRANSPORT_FAILED;
 621         default:
 622                 return USB_STOR_TRANSPORT_ERROR;
 623         }                       /* switch */
 624         return USB_STOR_TRANSPORT_ERROR;
 625 }
 626
 627 #define USB_TRANSPORT_UNKNOWN_RETRY 5
 628 #define USB_TRANSPORT_NOT_READY_RETRY 10
 629
 630 /* clear a stall on an endpoint - special for BBB devices */
 631 static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
 632 {
 633         int result;
 634
 635         /* ENDPOINT_HALT = 0, so set value to 0 */
 636         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 637                                 USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
 638                                 0, endpt, NULL, 0, USB_CNTL_TIMEOUT * 5);
 639         return result;
 640 }
 641
 642 static int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
 643 {
 644         int result, retry;
 645         int dir_in;
 646         int actlen, data_actlen;
 647         unsigned int pipe, pipein, pipeout;
 648         ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_csw, csw, 1);
 649 #ifdef BBB_XPORT_TRACE
 650         unsigned char *ptr;
 651         int index;
 652 #endif
 653
 654         dir_in = US_DIRECTION(srb->cmd[0]);
 655
 656         /* COMMAND phase */
 657         debug("COMMAND phase\n");
 658         result = usb_stor_BBB_comdat(srb, us);
 659         if (result < 0) {
 660                 debug("failed to send CBW status %ld\n",
 661                       us->pusb_dev->status);
 662                 usb_stor_BBB_reset(us);
 663                 return USB_STOR_TRANSPORT_FAILED;
 664         }
 665         if (!(us->flags & USB_READY))
 666                 mdelay(5);
 667         pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 668         pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 669         /* DATA phase + error handling */
 670         data_actlen = 0;
 671         /* no data, go immediately to the STATUS phase */
 672         if (srb->datalen == 0)
 673                 goto st;
 674         debug("DATA phase\n");
 675         if (dir_in)
 676                 pipe = pipein;
 677         else
 678                 pipe = pipeout;
 679
 680         result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, srb->datalen,
 681                               &data_actlen, USB_CNTL_TIMEOUT * 5);
 682         /* special handling of STALL in DATA phase */
 683         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 684                 debug("DATA:stall\n");
 685                 /* clear the STALL on the endpoint */
 686                 result = usb_stor_BBB_clear_endpt_stall(us,
 687                                         dir_in ? us->ep_in : us->ep_out);
 688                 if (result >= 0)
 689                         /* continue on to STATUS phase */
 690                         goto st;
 691         }
 692         if (result < 0) {
 693                 debug("usb_bulk_msg error status %ld\n",
 694                       us->pusb_dev->status);
 695                 usb_stor_BBB_reset(us);
 696                 return USB_STOR_TRANSPORT_FAILED;
 697         }
 698 #ifdef BBB_XPORT_TRACE
 699         for (index = 0; index < data_actlen; index++)
 700                 printf("pdata[%d] %#x ", index, srb->pdata[index]);
 701         printf("\n");
 702 #endif
 703         /* STATUS phase + error handling */
 704 st:
 705         retry = 0;
 706 again:
 707         debug("STATUS phase\n");
 708         result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE,
 709                                 &actlen, USB_CNTL_TIMEOUT*5);
 710
 711         /* special handling of STALL in STATUS phase */
 712         if ((result < 0) && (retry < 1) &&
 713             (us->pusb_dev->status & USB_ST_STALLED)) {
 714                 debug("STATUS:stall\n");
 715                 /* clear the STALL on the endpoint */
 716                 result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
 717                 if (result >= 0 && (retry++ < 1))
 718                         /* do a retry */
 719                         goto again;
 720         }
 721         if (result < 0) {
 722                 debug("usb_bulk_msg error status %ld\n",
 723                       us->pusb_dev->status);
 724                 usb_stor_BBB_reset(us);
 725                 return USB_STOR_TRANSPORT_FAILED;
 726         }
 727 #ifdef BBB_XPORT_TRACE
 728         ptr = (unsigned char *)csw;
 729         for (index = 0; index < UMASS_BBB_CSW_SIZE; index++)
 730                 printf("ptr[%d] %#x ", index, ptr[index]);
 731         printf("\n");
 732 #endif
 733         /* misuse pipe to get the residue */
 734         pipe = le32_to_cpu(csw->dCSWDataResidue);
 735         if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
 736                 pipe = srb->datalen - data_actlen;
 737         if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) {
 738                 debug("!CSWSIGNATURE\n");
 739                 usb_stor_BBB_reset(us);
 740                 return USB_STOR_TRANSPORT_FAILED;
 741         } else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) {
 742                 debug("!Tag\n");
 743                 usb_stor_BBB_reset(us);
 744                 return USB_STOR_TRANSPORT_FAILED;
 745         } else if (csw->bCSWStatus > CSWSTATUS_PHASE) {
 746                 debug(">PHASE\n");
 747                 usb_stor_BBB_reset(us);
 748                 return USB_STOR_TRANSPORT_FAILED;
 749         } else if (csw->bCSWStatus == CSWSTATUS_PHASE) {
 750                 debug("=PHASE\n");
 751                 usb_stor_BBB_reset(us);
 752                 return USB_STOR_TRANSPORT_FAILED;
 753         } else if (data_actlen > srb->datalen) {
 754                 debug("transferred %dB instead of %ldB\n",
 755                       data_actlen, srb->datalen);
 756                 return USB_STOR_TRANSPORT_FAILED;
 757         } else if (csw->bCSWStatus == CSWSTATUS_FAILED) {
 758                 debug("FAILED\n");
 759                 return USB_STOR_TRANSPORT_FAILED;
 760         }
 761
 762         return result;
 763 }
 764
 765 static int usb_stor_CB_transport(ccb *srb, struct us_data *us)
 766 {
 767         int result, status;
 768         ccb *psrb;
 769         ccb reqsrb;
 770         int retry, notready;
 771
 772         psrb = &reqsrb;
 773         status = USB_STOR_TRANSPORT_GOOD;
 774         retry = 0;
 775         notready = 0;
 776         /* issue the command */
 777 do_retry:
 778         result = usb_stor_CB_comdat(srb, us);
 779         debug("command / Data returned %d, status %lX\n",
 780               result, us->pusb_dev->status);
 781         /* if this is an CBI Protocol, get IRQ */
 782         if (us->protocol == US_PR_CBI) {
 783                 status = usb_stor_CBI_get_status(srb, us);
 784                 /* if the status is error, report it */
 785                 if (status == USB_STOR_TRANSPORT_ERROR) {
 786                         debug(" USB CBI Command Error\n");
 787                         return status;
 788                 }
 789                 srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8);
 790                 srb->sense_buf[13] = (unsigned char)(us->ip_data & 0xff);
 791                 if (!us->ip_data) {
 792                         /* if the status is good, report it */
 793                         if (status == USB_STOR_TRANSPORT_GOOD) {
 794                                 debug(" USB CBI Command Good\n");
 795                                 return status;
 796                         }
 797                 }
 798         }
 799         /* do we have to issue an auto request? */
 800         /* HERE we have to check the result */
 801         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 802                 debug("ERROR %lX\n", us->pusb_dev->status);
 803                 us->transport_reset(us);
 804                 return USB_STOR_TRANSPORT_ERROR;
 805         }
 806         if ((us->protocol == US_PR_CBI) &&
 807             ((srb->cmd[0] == SCSI_REQ_SENSE) ||
 808             (srb->cmd[0] == SCSI_INQUIRY))) {
 809                 /* do not issue an autorequest after request sense */
 810                 debug("No auto request and good\n");
 811                 return USB_STOR_TRANSPORT_GOOD;
 812         }
 813         /* issue an request_sense */
 814         memset(&psrb->cmd[0], 0, 12);
 815         psrb->cmd[0] = SCSI_REQ_SENSE;
 816         psrb->cmd[1] = srb->lun << 5;
 817         psrb->cmd[4] = 18;
 818         psrb->datalen = 18;
 819         psrb->pdata = &srb->sense_buf[0];
 820         psrb->cmdlen = 12;
 821         /* issue the command */
 822         result = usb_stor_CB_comdat(psrb, us);
 823         debug("auto request returned %d\n", result);
 824         /* if this is an CBI Protocol, get IRQ */
 825         if (us->protocol == US_PR_CBI)
 826                 status = usb_stor_CBI_get_status(psrb, us);
 827
 828         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 829                 debug(" AUTO REQUEST ERROR %ld\n",
 830                       us->pusb_dev->status);
 831                 return USB_STOR_TRANSPORT_ERROR;
 832         }
 833         debug("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
 834               srb->sense_buf[0], srb->sense_buf[2],
 835               srb->sense_buf[12], srb->sense_buf[13]);
 836         /* Check the auto request result */
 837         if ((srb->sense_buf[2] == 0) &&
 838             (srb->sense_buf[12] == 0) &&
 839             (srb->sense_buf[13] == 0)) {
 840                 /* ok, no sense */
 841                 return USB_STOR_TRANSPORT_GOOD;
 842         }
 843
 844         /* Check the auto request result */
 845         switch (srb->sense_buf[2]) {
 846         case 0x01:
 847                 /* Recovered Error */
 848                 return USB_STOR_TRANSPORT_GOOD;
 849                 break;
 850         case 0x02:
 851                 /* Not Ready */
 852                 if (notready++ > USB_TRANSPORT_NOT_READY_RETRY) {
 853                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 854                                " 0x%02X (NOT READY)\n", srb->cmd[0],
 855                                 srb->sense_buf[0], srb->sense_buf[2],
 856                                 srb->sense_buf[12], srb->sense_buf[13]);
 857                         return USB_STOR_TRANSPORT_FAILED;
 858                 } else {
 859                         mdelay(100);
 860                         goto do_retry;
 861                 }
 862                 break;
 863         default:
 864                 if (retry++ > USB_TRANSPORT_UNKNOWN_RETRY) {
 865                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 866                                " 0x%02X\n", srb->cmd[0], srb->sense_buf[0],
 867                                 srb->sense_buf[2], srb->sense_buf[12],
 868                                 srb->sense_buf[13]);
 869                         return USB_STOR_TRANSPORT_FAILED;
 870                 } else
 871                         goto do_retry;
 872                 break;
 873         }
 874         return USB_STOR_TRANSPORT_FAILED;
 875 }
 876
 877
 878 static int usb_inquiry(ccb *srb, struct us_data *ss)
 879 {
 880         int retry, i;
 881         retry = 5;
 882         do {
 883                 memset(&srb->cmd[0], 0, 12);
 884                 srb->cmd[0] = SCSI_INQUIRY;
 885                 srb->cmd[1] = srb->lun << 5;
 886                 srb->cmd[4] = 36;
 887                 srb->datalen = 36;
 888                 srb->cmdlen = 12;
 889                 i = ss->transport(srb, ss);
 890                 debug("inquiry returns %d\n", i);
 891                 if (i == 0)
 892                         break;
 893         } while (--retry);
 894
 895         if (!retry) {
 896                 printf("error in inquiry\n");
 897                 return -1;
 898         }
 899         return 0;
 900 }
 901
 902 static int usb_request_sense(ccb *srb, struct us_data *ss)
 903 {
 904         char *ptr;
 905
 906         ptr = (char *)srb->pdata;
 907         memset(&srb->cmd[0], 0, 12);
 908         srb->cmd[0] = SCSI_REQ_SENSE;
 909         srb->cmd[1] = srb->lun << 5;
 910         srb->cmd[4] = 18;
 911         srb->datalen = 18;
 912         srb->pdata = &srb->sense_buf[0];
 913         srb->cmdlen = 12;
 914         ss->transport(srb, ss);
 915         debug("Request Sense returned %02X %02X %02X\n",
 916               srb->sense_buf[2], srb->sense_buf[12],
 917               srb->sense_buf[13]);
 918         srb->pdata = (uchar *)ptr;
 919         return 0;
 920 }
 921
 922 static int usb_test_unit_ready(ccb *srb, struct us_data *ss)
 923 {
 924         int retries = 10;
 925
 926         do {
 927                 memset(&srb->cmd[0], 0, 12);
 928                 srb->cmd[0] = SCSI_TST_U_RDY;
 929                 srb->cmd[1] = srb->lun << 5;
 930                 srb->datalen = 0;
 931                 srb->cmdlen = 12;
 932                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD) {
 933                         ss->flags |= USB_READY;
 934                         return 0;
 935                 }
 936                 usb_request_sense(srb, ss);
 937                 /*
 938                  * Check the Key Code Qualifier, if it matches
 939                  * "Not Ready - medium not present"
 940                  * (the sense Key equals 0x2 and the ASC is 0x3a)
 941                  * return immediately as the medium being absent won't change
 942                  * unless there is a user action.
 943                  */
 944                 if ((srb->sense_buf[2] == 0x02) &&
 945                     (srb->sense_buf[12] == 0x3a))
 946                         return -1;
 947                 mdelay(100);
 948         } while (retries--);
 949
 950         return -1;
 951 }
 952
 953 static int usb_read_capacity(ccb *srb, struct us_data *ss)
 954 {
 955         int retry;
 956         /* XXX retries */
 957         retry = 3;
 958         do {
 959                 memset(&srb->cmd[0], 0, 12);
 960                 srb->cmd[0] = SCSI_RD_CAPAC;
 961                 srb->cmd[1] = srb->lun << 5;
 962                 srb->datalen = 8;
 963                 srb->cmdlen = 12;
 964                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
 965                         return 0;
 966         } while (retry--);
 967
 968         return -1;
 969 }
 970
 971 static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start,
 972                        unsigned short blocks)
 973 {
 974         memset(&srb->cmd[0], 0, 12);
 975         srb->cmd[0] = SCSI_READ10;
 976         srb->cmd[1] = srb->lun << 5;
 977         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
 978         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
 979         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
 980         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
 981         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
 982         srb->cmd[8] = (unsigned char) blocks & 0xff;
 983         srb->cmdlen = 12;
 984         debug("read10: start %lx blocks %x\n", start, blocks);
 985         return ss->transport(srb, ss);
 986 }
 987
 988 static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start,
 989                         unsigned short blocks)
 990 {
 991         memset(&srb->cmd[0], 0, 12);
 992         srb->cmd[0] = SCSI_WRITE10;
 993         srb->cmd[1] = srb->lun << 5;
 994         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
 995         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
 996         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
 997         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
 998         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
 999         srb->cmd[8] = (unsigned char) blocks & 0xff;
1000         srb->cmdlen = 12;
1001         debug("write10: start %lx blocks %x\n", start, blocks);
1002         return ss->transport(srb, ss);
1003 }
1004
1005
1006 #ifdef CONFIG_USB_BIN_FIXUP
1007 /*
1008  * Some USB storage devices queried for SCSI identification data respond with
1009  * binary strings, which if output to the console freeze the terminal. The
1010  * workaround is to modify the vendor and product strings read from such
1011  * device with proper values (as reported by 'usb info').
1012  *
1013  * Vendor and product length limits are taken from the definition of
1014  * block_dev_desc_t in include/part.h.
1015  */
1016 static void usb_bin_fixup(struct usb_device_descriptor descriptor,
1017                                 unsigned char vendor[],
1018                                 unsigned char product[]) {
1019         const unsigned char max_vendor_len = 40;
1020         const unsigned char max_product_len = 20;
1021         if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
1022                 strncpy((char *)vendor, "SMSC", max_vendor_len);
1023                 strncpy((char *)product, "Flash Media Cntrller",
1024                         max_product_len);
1025         }
1026 }
1027 #endif /* CONFIG_USB_BIN_FIXUP */
1028
1029 unsigned long usb_stor_read(int device, lbaint_t blknr,
1030                             lbaint_t blkcnt, void *buffer)
1031 {
1032         lbaint_t start, blks;
1033         uintptr_t buf_addr;
1034         unsigned short smallblks;
1035         struct usb_device *dev;
1036         struct us_data *ss;
1037         int retry;
1038         ccb *srb = &usb_ccb;
1039
1040         if (blkcnt == 0)
1041                 return 0;
1042
1043         device &= 0xff;
1044         /* Setup  device */
1045         debug("\nusb_read: dev %d\n", device);
1046         dev = usb_dev_desc[device].priv;
1047         if (!dev) {
1048                 debug("%s: No device\n", __func__);
1049                 return 0;
1050         }
1051         ss = (struct us_data *)dev->privptr;
1052
1053         usb_disable_asynch(1); /* asynch transfer not allowed */
1054         srb->lun = usb_dev_desc[device].lun;
1055         buf_addr = (uintptr_t)buffer;
1056         start = blknr;
1057         blks = blkcnt;
1058
1059         debug("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF
1060               " buffer %" PRIxPTR "\n", device, start, blks, buf_addr);
1061
1062         do {
1063                 /* XXX need some comment here */
1064                 retry = 2;
1065                 srb->pdata = (unsigned char *)buf_addr;
1066                 if (blks > USB_MAX_XFER_BLK)
1067                         smallblks = USB_MAX_XFER_BLK;
1068                 else
1069                         smallblks = (unsigned short) blks;
1070 retry_it:
1071                 if (smallblks == USB_MAX_XFER_BLK)
1072                         usb_show_progress();
1073                 srb->datalen = usb_dev_desc[device].blksz * smallblks;
1074                 srb->pdata = (unsigned char *)buf_addr;
1075                 if (usb_read_10(srb, ss, start, smallblks)) {
1076                         debug("Read ERROR\n");
1077                         usb_request_sense(srb, ss);
1078                         if (retry--)
1079                                 goto retry_it;
1080                         blkcnt -= blks;
1081                         break;
1082                 }
1083                 start += smallblks;
1084                 blks -= smallblks;
1085                 buf_addr += srb->datalen;
1086         } while (blks != 0);
1087         ss->flags &= ~USB_READY;
1088
1089         debug("usb_read: end startblk " LBAF
1090               ", blccnt %x buffer %" PRIxPTR "\n",
1091               start, smallblks, buf_addr);
1092
1093         usb_disable_asynch(0); /* asynch transfer allowed */
1094         if (blkcnt >= USB_MAX_XFER_BLK)
1095                 debug("\n");
1096         return blkcnt;
1097 }
1098
1099 unsigned long usb_stor_write(int device, lbaint_t blknr,
1100                                 lbaint_t blkcnt, const void *buffer)
1101 {
1102         lbaint_t start, blks;
1103         uintptr_t buf_addr;
1104         unsigned short smallblks;
1105         struct usb_device *dev;
1106         struct us_data *ss;
1107         int retry;
1108         ccb *srb = &usb_ccb;
1109
1110         if (blkcnt == 0)
1111                 return 0;
1112
1113         device &= 0xff;
1114         /* Setup  device */
1115         debug("\nusb_write: dev %d\n", device);
1116         dev = usb_dev_desc[device].priv;
1117         if (!dev)
1118                 return 0;
1119         ss = (struct us_data *)dev->privptr;
1120
1121         usb_disable_asynch(1); /* asynch transfer not allowed */
1122
1123         srb->lun = usb_dev_desc[device].lun;
1124         buf_addr = (uintptr_t)buffer;
1125         start = blknr;
1126         blks = blkcnt;
1127
1128         debug("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF
1129               " buffer %" PRIxPTR "\n", device, start, blks, buf_addr);
1130
1131         do {
1132                 /* If write fails retry for max retry count else
1133                  * return with number of blocks written successfully.
1134                  */
1135                 retry = 2;
1136                 srb->pdata = (unsigned char *)buf_addr;
1137                 if (blks > USB_MAX_XFER_BLK)
1138                         smallblks = USB_MAX_XFER_BLK;
1139                 else
1140                         smallblks = (unsigned short) blks;
1141 retry_it:
1142                 if (smallblks == USB_MAX_XFER_BLK)
1143                         usb_show_progress();
1144                 srb->datalen = usb_dev_desc[device].blksz * smallblks;
1145                 srb->pdata = (unsigned char *)buf_addr;
1146                 if (usb_write_10(srb, ss, start, smallblks)) {
1147                         debug("Write ERROR\n");
1148                         usb_request_sense(srb, ss);
1149                         if (retry--)
1150                                 goto retry_it;
1151                         blkcnt -= blks;
1152                         break;
1153                 }
1154                 start += smallblks;
1155                 blks -= smallblks;
1156                 buf_addr += srb->datalen;
1157         } while (blks != 0);
1158         ss->flags &= ~USB_READY;
1159
1160         debug("usb_write: end startblk " LBAF ", blccnt %x buffer %"
1161               PRIxPTR "\n", start, smallblks, buf_addr);
1162
1163         usb_disable_asynch(0); /* asynch transfer allowed */
1164         if (blkcnt >= USB_MAX_XFER_BLK)
1165                 debug("\n");
1166         return blkcnt;
1167
1168 }
1169
1170 /* Probe to see if a new device is actually a Storage device */
1171 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
1172                       struct us_data *ss)
1173 {
1174         struct usb_interface *iface;
1175         int i;
1176         struct usb_endpoint_descriptor *ep_desc;
1177         unsigned int flags = 0;
1178
1179         int protocol = 0;
1180         int subclass = 0;
1181
1182         /* let's examine the device now */
1183         iface = &dev->config.if_desc[ifnum];
1184
1185 #if 0
1186         /* this is the place to patch some storage devices */
1187         debug("iVendor %X iProduct %X\n", dev->descriptor.idVendor,
1188                         dev->descriptor.idProduct);
1189
1190         if ((dev->descriptor.idVendor) == 0x066b &&
1191             (dev->descriptor.idProduct) == 0x0103) {
1192                 debug("patched for E-USB\n");
1193                 protocol = US_PR_CB;
1194                 subclass = US_SC_UFI;       /* an assumption */
1195         }
1196 #endif
1197
1198         if (dev->descriptor.bDeviceClass != 0 ||
1199                         iface->desc.bInterfaceClass != USB_CLASS_MASS_STORAGE ||
1200                         iface->desc.bInterfaceSubClass < US_SC_MIN ||
1201                         iface->desc.bInterfaceSubClass > US_SC_MAX) {
1202                 debug("Not mass storage\n");
1203                 /* if it's not a mass storage, we go no further */
1204                 return 0;
1205         }
1206
1207         memset(ss, 0, sizeof(struct us_data));
1208
1209         /* At this point, we know we've got a live one */
1210         debug("\n\nUSB Mass Storage device detected\n");
1211
1212         /* Initialize the us_data structure with some useful info */
1213         ss->flags = flags;
1214         ss->ifnum = ifnum;
1215         ss->pusb_dev = dev;
1216         ss->attention_done = 0;
1217
1218         /* If the device has subclass and protocol, then use that.  Otherwise,
1219          * take data from the specific interface.
1220          */
1221         if (subclass) {
1222                 ss->subclass = subclass;
1223                 ss->protocol = protocol;
1224         } else {
1225                 ss->subclass = iface->desc.bInterfaceSubClass;
1226                 ss->protocol = iface->desc.bInterfaceProtocol;
1227         }
1228
1229         /* set the handler pointers based on the protocol */
1230         debug("Transport: ");
1231         switch (ss->protocol) {
1232         case US_PR_CB:
1233                 debug("Control/Bulk\n");
1234                 ss->transport = usb_stor_CB_transport;
1235                 ss->transport_reset = usb_stor_CB_reset;
1236                 break;
1237
1238         case US_PR_CBI:
1239                 debug("Control/Bulk/Interrupt\n");
1240                 ss->transport = usb_stor_CB_transport;
1241                 ss->transport_reset = usb_stor_CB_reset;
1242                 break;
1243         case US_PR_BULK:
1244                 debug("Bulk/Bulk/Bulk\n");
1245                 ss->transport = usb_stor_BBB_transport;
1246                 ss->transport_reset = usb_stor_BBB_reset;
1247                 break;
1248         default:
1249                 printf("USB Storage Transport unknown / not yet implemented\n");
1250                 return 0;
1251                 break;
1252         }
1253
1254         /*
1255          * We are expecting a minimum of 2 endpoints - in and out (bulk).
1256          * An optional interrupt is OK (necessary for CBI protocol).
1257          * We will ignore any others.
1258          */
1259         for (i = 0; i < iface->desc.bNumEndpoints; i++) {
1260                 ep_desc = &iface->ep_desc[i];
1261                 /* is it an BULK endpoint? */
1262                 if ((ep_desc->bmAttributes &
1263                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
1264                         if (ep_desc->bEndpointAddress & USB_DIR_IN)
1265                                 ss->ep_in = ep_desc->bEndpointAddress &
1266                                                 USB_ENDPOINT_NUMBER_MASK;
1267                         else
1268                                 ss->ep_out =
1269                                         ep_desc->bEndpointAddress &
1270                                         USB_ENDPOINT_NUMBER_MASK;
1271                 }
1272
1273                 /* is it an interrupt endpoint? */
1274                 if ((ep_desc->bmAttributes &
1275                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
1276                         ss->ep_int = ep_desc->bEndpointAddress &
1277                                                 USB_ENDPOINT_NUMBER_MASK;
1278                         ss->irqinterval = ep_desc->bInterval;
1279                 }
1280         }
1281         debug("Endpoints In %d Out %d Int %d\n",
1282               ss->ep_in, ss->ep_out, ss->ep_int);
1283
1284         /* Do some basic sanity checks, and bail if we find a problem */
1285         if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) ||
1286             !ss->ep_in || !ss->ep_out ||
1287             (ss->protocol == US_PR_CBI && ss->ep_int == 0)) {
1288                 debug("Problems with device\n");
1289                 return 0;
1290         }
1291         /* set class specific stuff */
1292         /* We only handle certain protocols.  Currently, these are
1293          * the only ones.
1294          * The SFF8070 accepts the requests used in u-boot
1295          */
1296         if (ss->subclass != US_SC_UFI && ss->subclass != US_SC_SCSI &&
1297             ss->subclass != US_SC_8070) {
1298                 printf("Sorry, protocol %d not yet supported.\n", ss->subclass);
1299                 return 0;
1300         }
1301         if (ss->ep_int) {
1302                 /* we had found an interrupt endpoint, prepare irq pipe
1303                  * set up the IRQ pipe and handler
1304                  */
1305                 ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255;
1306                 ss->irqpipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int);
1307                 ss->irqmaxp = usb_maxpacket(dev, ss->irqpipe);
1308                 dev->irq_handle = usb_stor_irq;
1309         }
1310         dev->privptr = (void *)ss;
1311         return 1;
1312 }
1313
1314 int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
1315                       block_dev_desc_t *dev_desc)
1316 {
1317         unsigned char perq, modi;
1318         ALLOC_CACHE_ALIGN_BUFFER(u32, cap, 2);
1319         ALLOC_CACHE_ALIGN_BUFFER(u8, usb_stor_buf, 36);
1320         u32 capacity, blksz;
1321         ccb *pccb = &usb_ccb;
1322
1323         pccb->pdata = usb_stor_buf;
1324
1325         dev_desc->target = dev->devnum;
1326         pccb->lun = dev_desc->lun;
1327         debug(" address %d\n", dev_desc->target);
1328
1329         if (usb_inquiry(pccb, ss)) {
1330                 debug("%s: usb_inquiry() failed\n", __func__);
1331                 return -1;
1332         }
1333
1334         perq = usb_stor_buf[0];
1335         modi = usb_stor_buf[1];
1336
1337         /*
1338          * Skip unknown devices (0x1f) and enclosure service devices (0x0d),
1339          * they would not respond to test_unit_ready .
1340          */
1341         if (((perq & 0x1f) == 0x1f) || ((perq & 0x1f) == 0x0d)) {
1342                 debug("%s: unknown/unsupported device\n", __func__);
1343                 return 0;
1344         }
1345         if ((modi&0x80) == 0x80) {
1346                 /* drive is removable */
1347                 dev_desc->removable = 1;
1348         }
1349         memcpy(dev_desc->vendor, (const void *)&usb_stor_buf[8], 8);
1350         memcpy(dev_desc->product, (const void *)&usb_stor_buf[16], 16);
1351         memcpy(dev_desc->revision, (const void *)&usb_stor_buf[32], 4);
1352         dev_desc->vendor[8] = 0;
1353         dev_desc->product[16] = 0;
1354         dev_desc->revision[4] = 0;
1355 #ifdef CONFIG_USB_BIN_FIXUP
1356         usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor,
1357                       (uchar *)dev_desc->product);
1358 #endif /* CONFIG_USB_BIN_FIXUP */
1359         debug("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
1360               usb_stor_buf[3]);
1361         if (usb_test_unit_ready(pccb, ss)) {
1362                 printf("Device NOT ready\n"
1363                        "   Request Sense returned %02X %02X %02X\n",
1364                        pccb->sense_buf[2], pccb->sense_buf[12],
1365                        pccb->sense_buf[13]);
1366                 if (dev_desc->removable == 1) {
1367                         dev_desc->type = perq;
1368                         return 1;
1369                 }
1370                 return 0;
1371         }
1372         pccb->pdata = (unsigned char *)cap;
1373         memset(pccb->pdata, 0, 8);
1374         if (usb_read_capacity(pccb, ss) != 0) {
1375                 printf("READ_CAP ERROR\n");
1376                 cap[0] = 2880;
1377                 cap[1] = 0x200;
1378         }
1379         ss->flags &= ~USB_READY;
1380         debug("Read Capacity returns: 0x%08x, 0x%08x\n", cap[0], cap[1]);
1381 #if 0
1382         if (cap[0] > (0x200000 * 10)) /* greater than 10 GByte */
1383                 cap[0] >>= 16;
1384
1385         cap[0] = cpu_to_be32(cap[0]);
1386         cap[1] = cpu_to_be32(cap[1]);
1387 #endif
1388
1389         capacity = be32_to_cpu(cap[0]) + 1;
1390         blksz = be32_to_cpu(cap[1]);
1391
1392         debug("Capacity = 0x%08x, blocksz = 0x%08x\n", capacity, blksz);
1393         dev_desc->lba = capacity;
1394         dev_desc->blksz = blksz;
1395         dev_desc->log2blksz = LOG2(dev_desc->blksz);
1396         dev_desc->type = perq;
1397         debug(" address %d\n", dev_desc->target);
1398         debug("partype: %d\n", dev_desc->part_type);
1399
1400         init_part(dev_desc);
1401
1402         debug("partype: %d\n", dev_desc->part_type);
1403         return 1;
1404 }
1405
1406 #ifdef CONFIG_DM_USB
1407
1408 static int usb_mass_storage_probe(struct udevice *dev)
1409 {
1410         struct usb_device *udev = dev_get_parentdata(dev);
1411         int ret;
1412
1413         usb_disable_asynch(1); /* asynch transfer not allowed */
1414         ret = usb_stor_probe_device(udev);
1415         usb_disable_asynch(0); /* asynch transfer allowed */
1416
1417         return ret;
1418 }
1419
1420 static const struct udevice_id usb_mass_storage_ids[] = {
1421         { .compatible = "usb-mass-storage" },
1422         { }
1423 };
1424
1425 U_BOOT_DRIVER(usb_mass_storage) = {
1426         .name   = "usb_mass_storage",
1427         .id     = UCLASS_MASS_STORAGE,
1428         .of_match = usb_mass_storage_ids,
1429         .probe = usb_mass_storage_probe,
1430 };
1431
1432 UCLASS_DRIVER(usb_mass_storage) = {
1433         .id             = UCLASS_MASS_STORAGE,
1434         .name           = "usb_mass_storage",
1435 };
1436
1437 static const struct usb_device_id mass_storage_id_table[] = {
1438         {
1439                 .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
1440                 .bInterfaceClass = USB_CLASS_MASS_STORAGE
1441         },
1442         { }             /* Terminating entry */
1443 };
1444
1445 U_BOOT_USB_DEVICE(usb_mass_storage, mass_storage_id_table);
1446
1447 #endif