common/usb_storage.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Most of this source has been derived from the Linux USB
   4  * project:
   5  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   6  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
   7  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
   8  *   (c) 2000 Yggdrasil Computing, Inc.
   9  *
  10  *
  11  * Adapted for U-Boot:
  12  *   (C) Copyright 2001 Denis Peter, MPL AG Switzerland
  13  * Driver model conversion:
  14  *   (C) Copyright 2015 Google, Inc
  15  *
  16  * For BBB support (C) Copyright 2003
  17  * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
  18  *
  19  * BBB support based on /sys/dev/usb/umass.c from
  20  * FreeBSD.
  21  */
  22
  23 /* Note:
  24  * Currently only the CBI transport protocoll has been implemented, and it
  25  * is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB
  26  * transport protocoll may work as well.
  27  */
  28 /*
  29  * New Note:
  30  * Support for USB Mass Storage Devices (BBB) has been added. It has
  31  * only been tested with USB memory sticks.
  32  */
  33
  34
  35 #include <common.h>
  36 #include <command.h>
  37 #include <dm.h>
  38 #include <errno.h>
  39 #include <mapmem.h>
  40 #include <memalign.h>
  41 #include <asm/byteorder.h>
  42 #include <asm/processor.h>
  43 #include <dm/device-internal.h>
  44 #include <dm/lists.h>
  45
  46 #include <part.h>
  47 #include <usb.h>
  48
  49 #undef BBB_COMDAT_TRACE
  50 #undef BBB_XPORT_TRACE
  51
  52 #include <scsi.h>
  53 /* direction table -- this indicates the direction of the data
  54  * transfer for each command code -- a 1 indicates input
  55  */
  56 static const unsigned char us_direction[256/8] = {
  57         0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
  58         0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
  59         0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
  60         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
  61 };
  62 #define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
  63
  64 static struct scsi_cmd usb_ccb __aligned(ARCH_DMA_MINALIGN);
  65 static __u32 CBWTag;
  66
  67 static int usb_max_devs; /* number of highest available usb device */
  68
  69 #if !CONFIG_IS_ENABLED(BLK)
  70 static struct blk_desc usb_dev_desc[USB_MAX_STOR_DEV];
  71 #endif
  72
  73 struct us_data;
  74 typedef int (*trans_cmnd)(struct scsi_cmd *cb, struct us_data *data);
  75 typedef int (*trans_reset)(struct us_data *data);
  76
  77 struct us_data {
  78         struct usb_device *pusb_dev;     /* this usb_device */
  79
  80         unsigned int    flags;                  /* from filter initially */
  81 #       define USB_READY        (1 << 0)
  82         unsigned char   ifnum;                  /* interface number */
  83         unsigned char   ep_in;                  /* in endpoint */
  84         unsigned char   ep_out;                 /* out ....... */
  85         unsigned char   ep_int;                 /* interrupt . */
  86         unsigned char   subclass;               /* as in overview */
  87         unsigned char   protocol;               /* .............. */
  88         unsigned char   attention_done;         /* force attn on first cmd */
  89         unsigned short  ip_data;                /* interrupt data */
  90         int             action;                 /* what to do */
  91         int             ip_wanted;              /* needed */
  92         int             *irq_handle;            /* for USB int requests */
  93         unsigned int    irqpipe;                /* pipe for release_irq */
  94         unsigned char   irqmaxp;                /* max packed for irq Pipe */
  95         unsigned char   irqinterval;            /* Intervall for IRQ Pipe */
  96         struct scsi_cmd *srb;                   /* current srb */
  97         trans_reset     transport_reset;        /* reset routine */
  98         trans_cmnd      transport;              /* transport routine */
  99         unsigned short  max_xfer_blk;           /* maximum transfer blocks */
 100 };
 101
 102 #if !CONFIG_IS_ENABLED(BLK)
 103 static struct us_data usb_stor[USB_MAX_STOR_DEV];
 104 #endif
 105
 106 #define USB_STOR_TRANSPORT_GOOD    0
 107 #define USB_STOR_TRANSPORT_FAILED -1
 108 #define USB_STOR_TRANSPORT_ERROR  -2
 109
 110 int usb_stor_get_info(struct usb_device *dev, struct us_data *us,
 111                       struct blk_desc *dev_desc);
 112 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
 113                       struct us_data *ss);
 114 #if CONFIG_IS_ENABLED(BLK)
 115 static unsigned long usb_stor_read(struct udevice *dev, lbaint_t blknr,
 116                                    lbaint_t blkcnt, void *buffer);
 117 static unsigned long usb_stor_write(struct udevice *dev, lbaint_t blknr,
 118                                     lbaint_t blkcnt, const void *buffer);
 119 #else
 120 static unsigned long usb_stor_read(struct blk_desc *block_dev, lbaint_t blknr,
 121                                    lbaint_t blkcnt, void *buffer);
 122 static unsigned long usb_stor_write(struct blk_desc *block_dev, lbaint_t blknr,
 123                                     lbaint_t blkcnt, const void *buffer);
 124 #endif
 125 void uhci_show_temp_int_td(void);
 126
 127 static void usb_show_progress(void)
 128 {
 129         debug(".");
 130 }
 131
 132 /*******************************************************************************
 133  * show info on storage devices; 'usb start/init' must be invoked earlier
 134  * as we only retrieve structures populated during devices initialization
 135  */
 136 int usb_stor_info(void)
 137 {
 138         int count = 0;
 139 #if CONFIG_IS_ENABLED(BLK)
 140         struct udevice *dev;
 141
 142         for (blk_first_device(IF_TYPE_USB, &dev);
 143              dev;
 144              blk_next_device(&dev)) {
 145                 struct blk_desc *desc = dev_get_uclass_platdata(dev);
 146
 147                 printf("  Device %d: ", desc->devnum);
 148                 dev_print(desc);
 149                 count++;
 150         }
 151 #else
 152         int i;
 153
 154         if (usb_max_devs > 0) {
 155                 for (i = 0; i < usb_max_devs; i++) {
 156                         printf("  Device %d: ", i);
 157                         dev_print(&usb_dev_desc[i]);
 158                 }
 159                 return 0;
 160         }
 161 #endif
 162         if (!count) {
 163                 printf("No storage devices, perhaps not 'usb start'ed..?\n");
 164                 return 1;
 165         }
 166
 167         return 0;
 168 }
 169
 170 static unsigned int usb_get_max_lun(struct us_data *us)
 171 {
 172         int len;
 173         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, result, 1);
 174         len = usb_control_msg(us->pusb_dev,
 175                               usb_rcvctrlpipe(us->pusb_dev, 0),
 176                               US_BBB_GET_MAX_LUN,
 177                               USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 178                               0, us->ifnum,
 179                               result, sizeof(char),
 180                               USB_CNTL_TIMEOUT * 5);
 181         debug("Get Max LUN -> len = %i, result = %i\n", len, (int) *result);
 182         return (len > 0) ? *result : 0;
 183 }
 184
 185 static int usb_stor_probe_device(struct usb_device *udev)
 186 {
 187         int lun, max_lun;
 188
 189 #if CONFIG_IS_ENABLED(BLK)
 190         struct us_data *data;
 191         int ret;
 192 #else
 193         int start;
 194
 195         if (udev == NULL)
 196                 return -ENOENT; /* no more devices available */
 197 #endif
 198
 199         debug("\n\nProbing for storage\n");
 200 #if CONFIG_IS_ENABLED(BLK)
 201         /*
 202          * We store the us_data in the mass storage device's platdata. It
 203          * is shared by all LUNs (block devices) attached to this mass storage
 204          * device.
 205          */
 206         data = dev_get_platdata(udev->dev);
 207         if (!usb_storage_probe(udev, 0, data))
 208                 return 0;
 209         max_lun = usb_get_max_lun(data);
 210         for (lun = 0; lun <= max_lun; lun++) {
 211                 struct blk_desc *blkdev;
 212                 struct udevice *dev;
 213                 char str[10];
 214
 215                 snprintf(str, sizeof(str), "lun%d", lun);
 216                 ret = blk_create_devicef(udev->dev, "usb_storage_blk", str,
 217                                          IF_TYPE_USB, usb_max_devs, 512, 0,
 218                                          &dev);
 219                 if (ret) {
 220                         debug("Cannot bind driver\n");
 221                         return ret;
 222                 }
 223
 224                 blkdev = dev_get_uclass_platdata(dev);
 225                 blkdev->target = 0xff;
 226                 blkdev->lun = lun;
 227
 228                 ret = usb_stor_get_info(udev, data, blkdev);
 229                 if (ret == 1) {
 230                         usb_max_devs++;
 231                         debug("%s: Found device %p\n", __func__, udev);
 232                 } else {
 233                         debug("usb_stor_get_info: Invalid device\n");
 234                         ret = device_unbind(dev);
 235                         if (ret)
 236                                 return ret;
 237                 }
 238         }
 239 #else
 240         /* We don't have space to even probe if we hit the maximum */
 241         if (usb_max_devs == USB_MAX_STOR_DEV) {
 242                 printf("max USB Storage Device reached: %d stopping\n",
 243                        usb_max_devs);
 244                 return -ENOSPC;
 245         }
 246
 247         if (!usb_storage_probe(udev, 0, &usb_stor[usb_max_devs]))
 248                 return 0;
 249
 250         /*
 251          * OK, it's a storage device.  Iterate over its LUNs and populate
 252          * usb_dev_desc'
 253          */
 254         start = usb_max_devs;
 255
 256         max_lun = usb_get_max_lun(&usb_stor[usb_max_devs]);
 257         for (lun = 0; lun <= max_lun && usb_max_devs < USB_MAX_STOR_DEV;
 258              lun++) {
 259                 struct blk_desc *blkdev;
 260
 261                 blkdev = &usb_dev_desc[usb_max_devs];
 262                 memset(blkdev, '\0', sizeof(struct blk_desc));
 263                 blkdev->if_type = IF_TYPE_USB;
 264                 blkdev->devnum = usb_max_devs;
 265                 blkdev->part_type = PART_TYPE_UNKNOWN;
 266                 blkdev->target = 0xff;
 267                 blkdev->type = DEV_TYPE_UNKNOWN;
 268                 blkdev->block_read = usb_stor_read;
 269                 blkdev->block_write = usb_stor_write;
 270                 blkdev->lun = lun;
 271                 blkdev->priv = udev;
 272
 273                 if (usb_stor_get_info(udev, &usb_stor[start],
 274                                       &usb_dev_desc[usb_max_devs]) == 1) {
 275                         debug("partype: %d\n", blkdev->part_type);
 276                         part_init(blkdev);
 277                         debug("partype: %d\n", blkdev->part_type);
 278                         usb_max_devs++;
 279                         debug("%s: Found device %p\n", __func__, udev);
 280                 }
 281         }
 282 #endif
 283
 284         return 0;
 285 }
 286
 287 void usb_stor_reset(void)
 288 {
 289         usb_max_devs = 0;
 290 }
 291
 292 /*******************************************************************************
 293  * scan the usb and reports device info
 294  * to the user if mode = 1
 295  * returns current device or -1 if no
 296  */
 297 int usb_stor_scan(int mode)
 298 {
 299         if (mode == 1)
 300                 printf("       scanning usb for storage devices... ");
 301
 302 #if !CONFIG_IS_ENABLED(DM_USB)
 303         unsigned char i;
 304
 305         usb_disable_asynch(1); /* asynch transfer not allowed */
 306
 307         usb_stor_reset();
 308         for (i = 0; i < USB_MAX_DEVICE; i++) {
 309                 struct usb_device *dev;
 310
 311                 dev = usb_get_dev_index(i); /* get device */
 312                 debug("i=%d\n", i);
 313                 if (usb_stor_probe_device(dev))
 314                         break;
 315         } /* for */
 316
 317         usb_disable_asynch(0); /* asynch transfer allowed */
 318 #endif
 319         printf("%d Storage Device(s) found\n", usb_max_devs);
 320         if (usb_max_devs > 0)
 321                 return 0;
 322         return -1;
 323 }
 324
 325 static int usb_stor_irq(struct usb_device *dev)
 326 {
 327         struct us_data *us;
 328         us = (struct us_data *)dev->privptr;
 329
 330         if (us->ip_wanted)
 331                 us->ip_wanted = 0;
 332         return 0;
 333 }
 334
 335
 336 #ifdef  DEBUG
 337
 338 static void usb_show_srb(struct scsi_cmd *pccb)
 339 {
 340         int i;
 341         printf("SRB: len %d datalen 0x%lX\n ", pccb->cmdlen, pccb->datalen);
 342         for (i = 0; i < 12; i++)
 343                 printf("%02X ", pccb->cmd[i]);
 344         printf("\n");
 345 }
 346
 347 static void display_int_status(unsigned long tmp)
 348 {
 349         printf("Status: %s %s %s %s %s %s %s\n",
 350                 (tmp & USB_ST_ACTIVE) ? "Active" : "",
 351                 (tmp & USB_ST_STALLED) ? "Stalled" : "",
 352                 (tmp & USB_ST_BUF_ERR) ? "Buffer Error" : "",
 353                 (tmp & USB_ST_BABBLE_DET) ? "Babble Det" : "",
 354                 (tmp & USB_ST_NAK_REC) ? "NAKed" : "",
 355                 (tmp & USB_ST_CRC_ERR) ? "CRC Error" : "",
 356                 (tmp & USB_ST_BIT_ERR) ? "Bitstuff Error" : "");
 357 }
 358 #endif
 359 /***********************************************************************
 360  * Data transfer routines
 361  ***********************************************************************/
 362
 363 static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length)
 364 {
 365         int max_size;
 366         int this_xfer;
 367         int result;
 368         int partial;
 369         int maxtry;
 370         int stat;
 371
 372         /* determine the maximum packet size for these transfers */
 373         max_size = usb_maxpacket(us->pusb_dev, pipe) * 16;
 374
 375         /* while we have data left to transfer */
 376         while (length) {
 377
 378                 /* calculate how long this will be -- maximum or a remainder */
 379                 this_xfer = length > max_size ? max_size : length;
 380                 length -= this_xfer;
 381
 382                 /* setup the retry counter */
 383                 maxtry = 10;
 384
 385                 /* set up the transfer loop */
 386                 do {
 387                         /* transfer the data */
 388                         debug("Bulk xfer 0x%lx(%d) try #%d\n",
 389                               (ulong)map_to_sysmem(buf), this_xfer,
 390                               11 - maxtry);
 391                         result = usb_bulk_msg(us->pusb_dev, pipe, buf,
 392                                               this_xfer, &partial,
 393                                               USB_CNTL_TIMEOUT * 5);
 394                         debug("bulk_msg returned %d xferred %d/%d\n",
 395                               result, partial, this_xfer);
 396                         if (us->pusb_dev->status != 0) {
 397                                 /* if we stall, we need to clear it before
 398                                  * we go on
 399                                  */
 400 #ifdef DEBUG
 401                                 display_int_status(us->pusb_dev->status);
 402 #endif
 403                                 if (us->pusb_dev->status & USB_ST_STALLED) {
 404                                         debug("stalled ->clearing endpoint" \
 405                                               "halt for pipe 0x%x\n", pipe);
 406                                         stat = us->pusb_dev->status;
 407                                         usb_clear_halt(us->pusb_dev, pipe);
 408                                         us->pusb_dev->status = stat;
 409                                         if (this_xfer == partial) {
 410                                                 debug("bulk transferred" \
 411                                                       "with error %lX," \
 412                                                       " but data ok\n",
 413                                                       us->pusb_dev->status);
 414                                                 return 0;
 415                                         }
 416                                         else
 417                                                 return result;
 418                                 }
 419                                 if (us->pusb_dev->status & USB_ST_NAK_REC) {
 420                                         debug("Device NAKed bulk_msg\n");
 421                                         return result;
 422                                 }
 423                                 debug("bulk transferred with error");
 424                                 if (this_xfer == partial) {
 425                                         debug(" %ld, but data ok\n",
 426                                               us->pusb_dev->status);
 427                                         return 0;
 428                                 }
 429                                 /* if our try counter reaches 0, bail out */
 430                                         debug(" %ld, data %d\n",
 431                                               us->pusb_dev->status, partial);
 432                                 if (!maxtry--)
 433                                                 return result;
 434                         }
 435                         /* update to show what data was transferred */
 436                         this_xfer -= partial;
 437                         buf += partial;
 438                         /* continue until this transfer is done */
 439                 } while (this_xfer);
 440         }
 441
 442         /* if we get here, we're done and successful */
 443         return 0;
 444 }
 445
 446 static int usb_stor_BBB_reset(struct us_data *us)
 447 {
 448         int result;
 449         unsigned int pipe;
 450
 451         /*
 452          * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
 453          *
 454          * For Reset Recovery the host shall issue in the following order:
 455          * a) a Bulk-Only Mass Storage Reset
 456          * b) a Clear Feature HALT to the Bulk-In endpoint
 457          * c) a Clear Feature HALT to the Bulk-Out endpoint
 458          *
 459          * This is done in 3 steps.
 460          *
 461          * If the reset doesn't succeed, the device should be port reset.
 462          *
 463          * This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
 464          */
 465         debug("BBB_reset\n");
 466         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 467                                  US_BBB_RESET,
 468                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 469                                  0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5);
 470
 471         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 472                 debug("RESET:stall\n");
 473                 return -1;
 474         }
 475
 476         /* long wait for reset */
 477         mdelay(150);
 478         debug("BBB_reset result %d: status %lX reset\n",
 479               result, us->pusb_dev->status);
 480         pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 481         result = usb_clear_halt(us->pusb_dev, pipe);
 482         /* long wait for reset */
 483         mdelay(150);
 484         debug("BBB_reset result %d: status %lX clearing IN endpoint\n",
 485               result, us->pusb_dev->status);
 486         /* long wait for reset */
 487         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 488         result = usb_clear_halt(us->pusb_dev, pipe);
 489         mdelay(150);
 490         debug("BBB_reset result %d: status %lX clearing OUT endpoint\n",
 491               result, us->pusb_dev->status);
 492         debug("BBB_reset done\n");
 493         return 0;
 494 }
 495
 496 /* FIXME: this reset function doesn't really reset the port, and it
 497  * should. Actually it should probably do what it's doing here, and
 498  * reset the port physically
 499  */
 500 static int usb_stor_CB_reset(struct us_data *us)
 501 {
 502         unsigned char cmd[12];
 503         int result;
 504
 505         debug("CB_reset\n");
 506         memset(cmd, 0xff, sizeof(cmd));
 507         cmd[0] = SCSI_SEND_DIAG;
 508         cmd[1] = 4;
 509         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 510                                  US_CBI_ADSC,
 511                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 512                                  0, us->ifnum, cmd, sizeof(cmd),
 513                                  USB_CNTL_TIMEOUT * 5);
 514
 515         /* long wait for reset */
 516         mdelay(1500);
 517         debug("CB_reset result %d: status %lX clearing endpoint halt\n",
 518               result, us->pusb_dev->status);
 519         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in));
 520         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out));
 521
 522         debug("CB_reset done\n");
 523         return 0;
 524 }
 525
 526 /*
 527  * Set up the command for a BBB device. Note that the actual SCSI
 528  * command is copied into cbw.CBWCDB.
 529  */
 530 static int usb_stor_BBB_comdat(struct scsi_cmd *srb, struct us_data *us)
 531 {
 532         int result;
 533         int actlen;
 534         int dir_in;
 535         unsigned int pipe;
 536         ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_cbw, cbw, 1);
 537
 538         dir_in = US_DIRECTION(srb->cmd[0]);
 539
 540 #ifdef BBB_COMDAT_TRACE
 541         printf("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n",
 542                 dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen,
 543                 srb->pdata);
 544         if (srb->cmdlen) {
 545                 for (result = 0; result < srb->cmdlen; result++)
 546                         printf("cmd[%d] %#x ", result, srb->cmd[result]);
 547                 printf("\n");
 548         }
 549 #endif
 550         /* sanity checks */
 551         if (!(srb->cmdlen <= CBWCDBLENGTH)) {
 552                 debug("usb_stor_BBB_comdat:cmdlen too large\n");
 553                 return -1;
 554         }
 555
 556         /* always OUT to the ep */
 557         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 558
 559         cbw->dCBWSignature = cpu_to_le32(CBWSIGNATURE);
 560         cbw->dCBWTag = cpu_to_le32(CBWTag++);
 561         cbw->dCBWDataTransferLength = cpu_to_le32(srb->datalen);
 562         cbw->bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
 563         cbw->bCBWLUN = srb->lun;
 564         cbw->bCDBLength = srb->cmdlen;
 565         /* copy the command data into the CBW command data buffer */
 566         /* DST SRC LEN!!! */
 567
 568         memcpy(cbw->CBWCDB, srb->cmd, srb->cmdlen);
 569         result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE,
 570                               &actlen, USB_CNTL_TIMEOUT * 5);
 571         if (result < 0)
 572                 debug("usb_stor_BBB_comdat:usb_bulk_msg error\n");
 573         return result;
 574 }
 575
 576 /* FIXME: we also need a CBI_command which sets up the completion
 577  * interrupt, and waits for it
 578  */
 579 static int usb_stor_CB_comdat(struct scsi_cmd *srb, struct us_data *us)
 580 {
 581         int result = 0;
 582         int dir_in, retry;
 583         unsigned int pipe;
 584         unsigned long status;
 585
 586         retry = 5;
 587         dir_in = US_DIRECTION(srb->cmd[0]);
 588
 589         if (dir_in)
 590                 pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 591         else
 592                 pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 593
 594         while (retry--) {
 595                 debug("CBI gets a command: Try %d\n", 5 - retry);
 596 #ifdef DEBUG
 597                 usb_show_srb(srb);
 598 #endif
 599                 /* let's send the command via the control pipe */
 600                 result = usb_control_msg(us->pusb_dev,
 601                                          usb_sndctrlpipe(us->pusb_dev , 0),
 602                                          US_CBI_ADSC,
 603                                          USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 604                                          0, us->ifnum,
 605                                          srb->cmd, srb->cmdlen,
 606                                          USB_CNTL_TIMEOUT * 5);
 607                 debug("CB_transport: control msg returned %d, status %lX\n",
 608                       result, us->pusb_dev->status);
 609                 /* check the return code for the command */
 610                 if (result < 0) {
 611                         if (us->pusb_dev->status & USB_ST_STALLED) {
 612                                 status = us->pusb_dev->status;
 613                                 debug(" stall during command found," \
 614                                       " clear pipe\n");
 615                                 usb_clear_halt(us->pusb_dev,
 616                                               usb_sndctrlpipe(us->pusb_dev, 0));
 617                                 us->pusb_dev->status = status;
 618                         }
 619                         debug(" error during command %02X" \
 620                               " Stat = %lX\n", srb->cmd[0],
 621                               us->pusb_dev->status);
 622                         return result;
 623                 }
 624                 /* transfer the data payload for this command, if one exists*/
 625
 626                 debug("CB_transport: control msg returned %d," \
 627                       " direction is %s to go 0x%lx\n", result,
 628                       dir_in ? "IN" : "OUT", srb->datalen);
 629                 if (srb->datalen) {
 630                         result = us_one_transfer(us, pipe, (char *)srb->pdata,
 631                                                  srb->datalen);
 632                         debug("CBI attempted to transfer data," \
 633                               " result is %d status %lX, len %d\n",
 634                               result, us->pusb_dev->status,
 635                                 us->pusb_dev->act_len);
 636                         if (!(us->pusb_dev->status & USB_ST_NAK_REC))
 637                                 break;
 638                 } /* if (srb->datalen) */
 639                 else
 640                         break;
 641         }
 642         /* return result */
 643
 644         return result;
 645 }
 646
 647
 648 static int usb_stor_CBI_get_status(struct scsi_cmd *srb, struct us_data *us)
 649 {
 650         int timeout;
 651
 652         us->ip_wanted = 1;
 653         submit_int_msg(us->pusb_dev, us->irqpipe,
 654                         (void *) &us->ip_data, us->irqmaxp, us->irqinterval);
 655         timeout = 1000;
 656         while (timeout--) {
 657                 if (us->ip_wanted == 0)
 658                         break;
 659                 mdelay(10);
 660         }
 661         if (us->ip_wanted) {
 662                 printf("        Did not get interrupt on CBI\n");
 663                 us->ip_wanted = 0;
 664                 return USB_STOR_TRANSPORT_ERROR;
 665         }
 666         debug("Got interrupt data 0x%x, transferred %d status 0x%lX\n",
 667               us->ip_data, us->pusb_dev->irq_act_len,
 668               us->pusb_dev->irq_status);
 669         /* UFI gives us ASC and ASCQ, like a request sense */
 670         if (us->subclass == US_SC_UFI) {
 671                 if (srb->cmd[0] == SCSI_REQ_SENSE ||
 672                     srb->cmd[0] == SCSI_INQUIRY)
 673                         return USB_STOR_TRANSPORT_GOOD; /* Good */
 674                 else if (us->ip_data)
 675                         return USB_STOR_TRANSPORT_FAILED;
 676                 else
 677                         return USB_STOR_TRANSPORT_GOOD;
 678         }
 679         /* otherwise, we interpret the data normally */
 680         switch (us->ip_data) {
 681         case 0x0001:
 682                 return USB_STOR_TRANSPORT_GOOD;
 683         case 0x0002:
 684                 return USB_STOR_TRANSPORT_FAILED;
 685         default:
 686                 return USB_STOR_TRANSPORT_ERROR;
 687         }                       /* switch */
 688         return USB_STOR_TRANSPORT_ERROR;
 689 }
 690
 691 #define USB_TRANSPORT_UNKNOWN_RETRY 5
 692 #define USB_TRANSPORT_NOT_READY_RETRY 10
 693
 694 /* clear a stall on an endpoint - special for BBB devices */
 695 static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
 696 {
 697         /* ENDPOINT_HALT = 0, so set value to 0 */
 698         return usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 699                                USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0,
 700                                endpt, NULL, 0, USB_CNTL_TIMEOUT * 5);
 701 }
 702
 703 static int usb_stor_BBB_transport(struct scsi_cmd *srb, struct us_data *us)
 704 {
 705         int result, retry;
 706         int dir_in;
 707         int actlen, data_actlen;
 708         unsigned int pipe, pipein, pipeout;
 709         ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_csw, csw, 1);
 710 #ifdef BBB_XPORT_TRACE
 711         unsigned char *ptr;
 712         int index;
 713 #endif
 714
 715         dir_in = US_DIRECTION(srb->cmd[0]);
 716
 717         /* COMMAND phase */
 718         debug("COMMAND phase\n");
 719         result = usb_stor_BBB_comdat(srb, us);
 720         if (result < 0) {
 721                 debug("failed to send CBW status %ld\n",
 722                       us->pusb_dev->status);
 723                 usb_stor_BBB_reset(us);
 724                 return USB_STOR_TRANSPORT_FAILED;
 725         }
 726         if (!(us->flags & USB_READY))
 727                 mdelay(5);
 728         pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 729         pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 730         /* DATA phase + error handling */
 731         data_actlen = 0;
 732         /* no data, go immediately to the STATUS phase */
 733         if (srb->datalen == 0)
 734                 goto st;
 735         debug("DATA phase\n");
 736         if (dir_in)
 737                 pipe = pipein;
 738         else
 739                 pipe = pipeout;
 740
 741         result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, srb->datalen,
 742                               &data_actlen, USB_CNTL_TIMEOUT * 5);
 743         /* special handling of STALL in DATA phase */
 744         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 745                 debug("DATA:stall\n");
 746                 /* clear the STALL on the endpoint */
 747                 result = usb_stor_BBB_clear_endpt_stall(us,
 748                                         dir_in ? us->ep_in : us->ep_out);
 749                 if (result >= 0)
 750                         /* continue on to STATUS phase */
 751                         goto st;
 752         }
 753         if (result < 0) {
 754                 debug("usb_bulk_msg error status %ld\n",
 755                       us->pusb_dev->status);
 756                 usb_stor_BBB_reset(us);
 757                 return USB_STOR_TRANSPORT_FAILED;
 758         }
 759 #ifdef BBB_XPORT_TRACE
 760         for (index = 0; index < data_actlen; index++)
 761                 printf("pdata[%d] %#x ", index, srb->pdata[index]);
 762         printf("\n");
 763 #endif
 764         /* STATUS phase + error handling */
 765 st:
 766         retry = 0;
 767 again:
 768         debug("STATUS phase\n");
 769         result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE,
 770                                 &actlen, USB_CNTL_TIMEOUT*5);
 771
 772         /* special handling of STALL in STATUS phase */
 773         if ((result < 0) && (retry < 1) &&
 774             (us->pusb_dev->status & USB_ST_STALLED)) {
 775                 debug("STATUS:stall\n");
 776                 /* clear the STALL on the endpoint */
 777                 result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
 778                 if (result >= 0 && (retry++ < 1))
 779                         /* do a retry */
 780                         goto again;
 781         }
 782         if (result < 0) {
 783                 debug("usb_bulk_msg error status %ld\n",
 784                       us->pusb_dev->status);
 785                 usb_stor_BBB_reset(us);
 786                 return USB_STOR_TRANSPORT_FAILED;
 787         }
 788 #ifdef BBB_XPORT_TRACE
 789         ptr = (unsigned char *)csw;
 790         for (index = 0; index < UMASS_BBB_CSW_SIZE; index++)
 791                 printf("ptr[%d] %#x ", index, ptr[index]);
 792         printf("\n");
 793 #endif
 794         /* misuse pipe to get the residue */
 795         pipe = le32_to_cpu(csw->dCSWDataResidue);
 796         if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
 797                 pipe = srb->datalen - data_actlen;
 798         if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) {
 799                 debug("!CSWSIGNATURE\n");
 800                 usb_stor_BBB_reset(us);
 801                 return USB_STOR_TRANSPORT_FAILED;
 802         } else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) {
 803                 debug("!Tag\n");
 804                 usb_stor_BBB_reset(us);
 805                 return USB_STOR_TRANSPORT_FAILED;
 806         } else if (csw->bCSWStatus > CSWSTATUS_PHASE) {
 807                 debug(">PHASE\n");
 808                 usb_stor_BBB_reset(us);
 809                 return USB_STOR_TRANSPORT_FAILED;
 810         } else if (csw->bCSWStatus == CSWSTATUS_PHASE) {
 811                 debug("=PHASE\n");
 812                 usb_stor_BBB_reset(us);
 813                 return USB_STOR_TRANSPORT_FAILED;
 814         } else if (data_actlen > srb->datalen) {
 815                 debug("transferred %dB instead of %ldB\n",
 816                       data_actlen, srb->datalen);
 817                 return USB_STOR_TRANSPORT_FAILED;
 818         } else if (csw->bCSWStatus == CSWSTATUS_FAILED) {
 819                 debug("FAILED\n");
 820                 return USB_STOR_TRANSPORT_FAILED;
 821         }
 822
 823         return result;
 824 }
 825
 826 static int usb_stor_CB_transport(struct scsi_cmd *srb, struct us_data *us)
 827 {
 828         int result, status;
 829         struct scsi_cmd *psrb;
 830         struct scsi_cmd reqsrb;
 831         int retry, notready;
 832
 833         psrb = &reqsrb;
 834         status = USB_STOR_TRANSPORT_GOOD;
 835         retry = 0;
 836         notready = 0;
 837         /* issue the command */
 838 do_retry:
 839         result = usb_stor_CB_comdat(srb, us);
 840         debug("command / Data returned %d, status %lX\n",
 841               result, us->pusb_dev->status);
 842         /* if this is an CBI Protocol, get IRQ */
 843         if (us->protocol == US_PR_CBI) {
 844                 status = usb_stor_CBI_get_status(srb, us);
 845                 /* if the status is error, report it */
 846                 if (status == USB_STOR_TRANSPORT_ERROR) {
 847                         debug(" USB CBI Command Error\n");
 848                         return status;
 849                 }
 850                 srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8);
 851                 srb->sense_buf[13] = (unsigned char)(us->ip_data & 0xff);
 852                 if (!us->ip_data) {
 853                         /* if the status is good, report it */
 854                         if (status == USB_STOR_TRANSPORT_GOOD) {
 855                                 debug(" USB CBI Command Good\n");
 856                                 return status;
 857                         }
 858                 }
 859         }
 860         /* do we have to issue an auto request? */
 861         /* HERE we have to check the result */
 862         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 863                 debug("ERROR %lX\n", us->pusb_dev->status);
 864                 us->transport_reset(us);
 865                 return USB_STOR_TRANSPORT_ERROR;
 866         }
 867         if ((us->protocol == US_PR_CBI) &&
 868             ((srb->cmd[0] == SCSI_REQ_SENSE) ||
 869             (srb->cmd[0] == SCSI_INQUIRY))) {
 870                 /* do not issue an autorequest after request sense */
 871                 debug("No auto request and good\n");
 872                 return USB_STOR_TRANSPORT_GOOD;
 873         }
 874         /* issue an request_sense */
 875         memset(&psrb->cmd[0], 0, 12);
 876         psrb->cmd[0] = SCSI_REQ_SENSE;
 877         psrb->cmd[1] = srb->lun << 5;
 878         psrb->cmd[4] = 18;
 879         psrb->datalen = 18;
 880         psrb->pdata = &srb->sense_buf[0];
 881         psrb->cmdlen = 12;
 882         /* issue the command */
 883         result = usb_stor_CB_comdat(psrb, us);
 884         debug("auto request returned %d\n", result);
 885         /* if this is an CBI Protocol, get IRQ */
 886         if (us->protocol == US_PR_CBI)
 887                 status = usb_stor_CBI_get_status(psrb, us);
 888
 889         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 890                 debug(" AUTO REQUEST ERROR %ld\n",
 891                       us->pusb_dev->status);
 892                 return USB_STOR_TRANSPORT_ERROR;
 893         }
 894         debug("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
 895               srb->sense_buf[0], srb->sense_buf[2],
 896               srb->sense_buf[12], srb->sense_buf[13]);
 897         /* Check the auto request result */
 898         if ((srb->sense_buf[2] == 0) &&
 899             (srb->sense_buf[12] == 0) &&
 900             (srb->sense_buf[13] == 0)) {
 901                 /* ok, no sense */
 902                 return USB_STOR_TRANSPORT_GOOD;
 903         }
 904
 905         /* Check the auto request result */
 906         switch (srb->sense_buf[2]) {
 907         case 0x01:
 908                 /* Recovered Error */
 909                 return USB_STOR_TRANSPORT_GOOD;
 910                 break;
 911         case 0x02:
 912                 /* Not Ready */
 913                 if (notready++ > USB_TRANSPORT_NOT_READY_RETRY) {
 914                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 915                                " 0x%02X (NOT READY)\n", srb->cmd[0],
 916                                 srb->sense_buf[0], srb->sense_buf[2],
 917                                 srb->sense_buf[12], srb->sense_buf[13]);
 918                         return USB_STOR_TRANSPORT_FAILED;
 919                 } else {
 920                         mdelay(100);
 921                         goto do_retry;
 922                 }
 923                 break;
 924         default:
 925                 if (retry++ > USB_TRANSPORT_UNKNOWN_RETRY) {
 926                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 927                                " 0x%02X\n", srb->cmd[0], srb->sense_buf[0],
 928                                 srb->sense_buf[2], srb->sense_buf[12],
 929                                 srb->sense_buf[13]);
 930                         return USB_STOR_TRANSPORT_FAILED;
 931                 } else
 932                         goto do_retry;
 933                 break;
 934         }
 935         return USB_STOR_TRANSPORT_FAILED;
 936 }
 937
 938 static void usb_stor_set_max_xfer_blk(struct usb_device *udev,
 939                                       struct us_data *us)
 940 {
 941         unsigned short blk;
 942         size_t __maybe_unused size;
 943         int __maybe_unused ret;
 944
 945 #if !CONFIG_IS_ENABLED(DM_USB)
 946 #ifdef CONFIG_USB_EHCI_HCD
 947         /*
 948          * The U-Boot EHCI driver can handle any transfer length as long as
 949          * there is enough free heap space left, but the SCSI READ(10) and
 950          * WRITE(10) commands are limited to 65535 blocks.
 951          */
 952         blk = USHRT_MAX;
 953 #else
 954         blk = 20;
 955 #endif
 956 #else
 957         ret = usb_get_max_xfer_size(udev, (size_t *)&size);
 958         if (ret < 0) {
 959                 /* unimplemented, let's use default 20 */
 960                 blk = 20;
 961         } else {
 962                 if (size > USHRT_MAX * 512)
 963                         size = USHRT_MAX * 512;
 964                 blk = size / 512;
 965         }
 966 #endif
 967
 968         us->max_xfer_blk = blk;
 969 }
 970
 971 static int usb_inquiry(struct scsi_cmd *srb, struct us_data *ss)
 972 {
 973         int retry, i;
 974         retry = 5;
 975         do {
 976                 memset(&srb->cmd[0], 0, 12);
 977                 srb->cmd[0] = SCSI_INQUIRY;
 978                 srb->cmd[1] = srb->lun << 5;
 979                 srb->cmd[4] = 36;
 980                 srb->datalen = 36;
 981                 srb->cmdlen = 12;
 982                 i = ss->transport(srb, ss);
 983                 debug("inquiry returns %d\n", i);
 984                 if (i == 0)
 985                         break;
 986         } while (--retry);
 987
 988         if (!retry) {
 989                 printf("error in inquiry\n");
 990                 return -1;
 991         }
 992         return 0;
 993 }
 994
 995 static int usb_request_sense(struct scsi_cmd *srb, struct us_data *ss)
 996 {
 997         char *ptr;
 998
 999         ptr = (char *)srb->pdata;
1000         memset(&srb->cmd[0], 0, 12);
1001         srb->cmd[0] = SCSI_REQ_SENSE;
1002         srb->cmd[1] = srb->lun << 5;
1003         srb->cmd[4] = 18;
1004         srb->datalen = 18;
1005         srb->pdata = &srb->sense_buf[0];
1006         srb->cmdlen = 12;
1007         ss->transport(srb, ss);
1008         debug("Request Sense returned %02X %02X %02X\n",
1009               srb->sense_buf[2], srb->sense_buf[12],
1010               srb->sense_buf[13]);
1011         srb->pdata = (uchar *)ptr;
1012         return 0;
1013 }
1014
1015 static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
1016 {
1017         int retries = 10;
1018
1019         do {
1020                 memset(&srb->cmd[0], 0, 12);
1021                 srb->cmd[0] = SCSI_TST_U_RDY;
1022                 srb->cmd[1] = srb->lun << 5;
1023                 srb->datalen = 0;
1024                 srb->cmdlen = 12;
1025                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD) {
1026                         ss->flags |= USB_READY;
1027                         return 0;
1028                 }
1029                 usb_request_sense(srb, ss);
1030                 /*
1031                  * Check the Key Code Qualifier, if it matches
1032                  * "Not Ready - medium not present"
1033                  * (the sense Key equals 0x2 and the ASC is 0x3a)
1034                  * return immediately as the medium being absent won't change
1035                  * unless there is a user action.
1036                  */
1037                 if ((srb->sense_buf[2] == 0x02) &&
1038                     (srb->sense_buf[12] == 0x3a))
1039                         return -1;
1040                 mdelay(100);
1041         } while (retries--);
1042
1043         return -1;
1044 }
1045
1046 static int usb_read_capacity(struct scsi_cmd *srb, struct us_data *ss)
1047 {
1048         int retry;
1049         /* XXX retries */
1050         retry = 3;
1051         do {
1052                 memset(&srb->cmd[0], 0, 12);
1053                 srb->cmd[0] = SCSI_RD_CAPAC;
1054                 srb->cmd[1] = srb->lun << 5;
1055                 srb->datalen = 8;
1056                 srb->cmdlen = 12;
1057                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
1058                         return 0;
1059         } while (retry--);
1060
1061         return -1;
1062 }
1063
1064 static int usb_read_10(struct scsi_cmd *srb, struct us_data *ss,
1065                        unsigned long start, unsigned short blocks)
1066 {
1067         memset(&srb->cmd[0], 0, 12);
1068         srb->cmd[0] = SCSI_READ10;
1069         srb->cmd[1] = srb->lun << 5;
1070         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
1071         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
1072         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
1073         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
1074         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
1075         srb->cmd[8] = (unsigned char) blocks & 0xff;
1076         srb->cmdlen = 12;
1077         debug("read10: start %lx blocks %x\n", start, blocks);
1078         return ss->transport(srb, ss);
1079 }
1080
1081 static int usb_write_10(struct scsi_cmd *srb, struct us_data *ss,
1082                         unsigned long start, unsigned short blocks)
1083 {
1084         memset(&srb->cmd[0], 0, 12);
1085         srb->cmd[0] = SCSI_WRITE10;
1086         srb->cmd[1] = srb->lun << 5;
1087         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
1088         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
1089         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
1090         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
1091         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
1092         srb->cmd[8] = (unsigned char) blocks & 0xff;
1093         srb->cmdlen = 12;
1094         debug("write10: start %lx blocks %x\n", start, blocks);
1095         return ss->transport(srb, ss);
1096 }
1097
1098
1099 #ifdef CONFIG_USB_BIN_FIXUP
1100 /*
1101  * Some USB storage devices queried for SCSI identification data respond with
1102  * binary strings, which if output to the console freeze the terminal. The
1103  * workaround is to modify the vendor and product strings read from such
1104  * device with proper values (as reported by 'usb info').
1105  *
1106  * Vendor and product length limits are taken from the definition of
1107  * struct blk_desc in include/part.h.
1108  */
1109 static void usb_bin_fixup(struct usb_device_descriptor descriptor,
1110                                 unsigned char vendor[],
1111                                 unsigned char product[]) {
1112         const unsigned char max_vendor_len = 40;
1113         const unsigned char max_product_len = 20;
1114         if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
1115                 strncpy((char *)vendor, "SMSC", max_vendor_len);
1116                 strncpy((char *)product, "Flash Media Cntrller",
1117                         max_product_len);
1118         }
1119 }
1120 #endif /* CONFIG_USB_BIN_FIXUP */
1121
1122 #if CONFIG_IS_ENABLED(BLK)
1123 static unsigned long usb_stor_read(struct udevice *dev, lbaint_t blknr,
1124                                    lbaint_t blkcnt, void *buffer)
1125 #else
1126 static unsigned long usb_stor_read(struct blk_desc *block_dev, lbaint_t blknr,
1127                                    lbaint_t blkcnt, void *buffer)
1128 #endif
1129 {
1130         lbaint_t start, blks;
1131         uintptr_t buf_addr;
1132         unsigned short smallblks;
1133         struct usb_device *udev;
1134         struct us_data *ss;
1135         int retry;
1136         struct scsi_cmd *srb = &usb_ccb;
1137 #if CONFIG_IS_ENABLED(BLK)
1138         struct blk_desc *block_dev;
1139 #endif
1140
1141         if (blkcnt == 0)
1142                 return 0;
1143         /* Setup  device */
1144 #if CONFIG_IS_ENABLED(BLK)
1145         block_dev = dev_get_uclass_platdata(dev);
1146         udev = dev_get_parent_priv(dev_get_parent(dev));
1147         debug("\nusb_read: udev %d\n", block_dev->devnum);
1148 #else
1149         debug("\nusb_read: udev %d\n", block_dev->devnum);
1150         udev = usb_dev_desc[block_dev->devnum].priv;
1151         if (!udev) {
1152                 debug("%s: No device\n", __func__);
1153                 return 0;
1154         }
1155 #endif
1156         ss = (struct us_data *)udev->privptr;
1157
1158         usb_disable_asynch(1); /* asynch transfer not allowed */
1159         srb->lun = block_dev->lun;
1160         buf_addr = (uintptr_t)buffer;
1161         start = blknr;
1162         blks = blkcnt;
1163
1164         debug("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
1165               block_dev->devnum, start, blks, buf_addr);
1166
1167         do {
1168                 /* XXX need some comment here */
1169                 retry = 2;
1170                 srb->pdata = (unsigned char *)buf_addr;
1171                 if (blks > ss->max_xfer_blk)
1172                         smallblks = ss->max_xfer_blk;
1173                 else
1174                         smallblks = (unsigned short) blks;
1175 retry_it:
1176                 if (smallblks == ss->max_xfer_blk)
1177                         usb_show_progress();
1178                 srb->datalen = block_dev->blksz * smallblks;
1179                 srb->pdata = (unsigned char *)buf_addr;
1180                 if (usb_read_10(srb, ss, start, smallblks)) {
1181                         debug("Read ERROR\n");
1182                         usb_request_sense(srb, ss);
1183                         if (retry--)
1184                                 goto retry_it;
1185                         blkcnt -= blks;
1186                         break;
1187                 }
1188                 start += smallblks;
1189                 blks -= smallblks;
1190                 buf_addr += srb->datalen;
1191         } while (blks != 0);
1192         ss->flags &= ~USB_READY;
1193
1194         debug("usb_read: end startblk " LBAF ", blccnt %x buffer %lx\n",
1195               start, smallblks, buf_addr);
1196
1197         usb_disable_asynch(0); /* asynch transfer allowed */
1198         if (blkcnt >= ss->max_xfer_blk)
1199                 debug("\n");
1200         return blkcnt;
1201 }
1202
1203 #if CONFIG_IS_ENABLED(BLK)
1204 static unsigned long usb_stor_write(struct udevice *dev, lbaint_t blknr,
1205                                     lbaint_t blkcnt, const void *buffer)
1206 #else
1207 static unsigned long usb_stor_write(struct blk_desc *block_dev, lbaint_t blknr,
1208                                     lbaint_t blkcnt, const void *buffer)
1209 #endif
1210 {
1211         lbaint_t start, blks;
1212         uintptr_t buf_addr;
1213         unsigned short smallblks;
1214         struct usb_device *udev;
1215         struct us_data *ss;
1216         int retry;
1217         struct scsi_cmd *srb = &usb_ccb;
1218 #if CONFIG_IS_ENABLED(BLK)
1219         struct blk_desc *block_dev;
1220 #endif
1221
1222         if (blkcnt == 0)
1223                 return 0;
1224
1225         /* Setup  device */
1226 #if CONFIG_IS_ENABLED(BLK)
1227         block_dev = dev_get_uclass_platdata(dev);
1228         udev = dev_get_parent_priv(dev_get_parent(dev));
1229         debug("\nusb_read: udev %d\n", block_dev->devnum);
1230 #else
1231         debug("\nusb_read: udev %d\n", block_dev->devnum);
1232         udev = usb_dev_desc[block_dev->devnum].priv;
1233         if (!udev) {
1234                 debug("%s: No device\n", __func__);
1235                 return 0;
1236         }
1237 #endif
1238         ss = (struct us_data *)udev->privptr;
1239
1240         usb_disable_asynch(1); /* asynch transfer not allowed */
1241
1242         srb->lun = block_dev->lun;
1243         buf_addr = (uintptr_t)buffer;
1244         start = blknr;
1245         blks = blkcnt;
1246
1247         debug("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
1248               block_dev->devnum, start, blks, buf_addr);
1249
1250         do {
1251                 /* If write fails retry for max retry count else
1252                  * return with number of blocks written successfully.
1253                  */
1254                 retry = 2;
1255                 srb->pdata = (unsigned char *)buf_addr;
1256                 if (blks > ss->max_xfer_blk)
1257                         smallblks = ss->max_xfer_blk;
1258                 else
1259                         smallblks = (unsigned short) blks;
1260 retry_it:
1261                 if (smallblks == ss->max_xfer_blk)
1262                         usb_show_progress();
1263                 srb->datalen = block_dev->blksz * smallblks;
1264                 srb->pdata = (unsigned char *)buf_addr;
1265                 if (usb_write_10(srb, ss, start, smallblks)) {
1266                         debug("Write ERROR\n");
1267                         usb_request_sense(srb, ss);
1268                         if (retry--)
1269                                 goto retry_it;
1270                         blkcnt -= blks;
1271                         break;
1272                 }
1273                 start += smallblks;
1274                 blks -= smallblks;
1275                 buf_addr += srb->datalen;
1276         } while (blks != 0);
1277         ss->flags &= ~USB_READY;
1278
1279         debug("usb_write: end startblk " LBAF ", blccnt %x buffer %lx\n",
1280               start, smallblks, buf_addr);
1281
1282         usb_disable_asynch(0); /* asynch transfer allowed */
1283         if (blkcnt >= ss->max_xfer_blk)
1284                 debug("\n");
1285         return blkcnt;
1286
1287 }
1288
1289 /* Probe to see if a new device is actually a Storage device */
1290 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
1291                       struct us_data *ss)
1292 {
1293         struct usb_interface *iface;
1294         int i;
1295         struct usb_endpoint_descriptor *ep_desc;
1296         unsigned int flags = 0;
1297
1298         /* let's examine the device now */
1299         iface = &dev->config.if_desc[ifnum];
1300
1301         if (dev->descriptor.bDeviceClass != 0 ||
1302                         iface->desc.bInterfaceClass != USB_CLASS_MASS_STORAGE ||
1303                         iface->desc.bInterfaceSubClass < US_SC_MIN ||
1304                         iface->desc.bInterfaceSubClass > US_SC_MAX) {
1305                 debug("Not mass storage\n");
1306                 /* if it's not a mass storage, we go no further */
1307                 return 0;
1308         }
1309
1310         memset(ss, 0, sizeof(struct us_data));
1311
1312         /* At this point, we know we've got a live one */
1313         debug("\n\nUSB Mass Storage device detected\n");
1314
1315         /* Initialize the us_data structure with some useful info */
1316         ss->flags = flags;
1317         ss->ifnum = ifnum;
1318         ss->pusb_dev = dev;
1319         ss->attention_done = 0;
1320         ss->subclass = iface->desc.bInterfaceSubClass;
1321         ss->protocol = iface->desc.bInterfaceProtocol;
1322
1323         /* set the handler pointers based on the protocol */
1324         debug("Transport: ");
1325         switch (ss->protocol) {
1326         case US_PR_CB:
1327                 debug("Control/Bulk\n");
1328                 ss->transport = usb_stor_CB_transport;
1329                 ss->transport_reset = usb_stor_CB_reset;
1330                 break;
1331
1332         case US_PR_CBI:
1333                 debug("Control/Bulk/Interrupt\n");
1334                 ss->transport = usb_stor_CB_transport;
1335                 ss->transport_reset = usb_stor_CB_reset;
1336                 break;
1337         case US_PR_BULK:
1338                 debug("Bulk/Bulk/Bulk\n");
1339                 ss->transport = usb_stor_BBB_transport;
1340                 ss->transport_reset = usb_stor_BBB_reset;
1341                 break;
1342         default:
1343                 printf("USB Storage Transport unknown / not yet implemented\n");
1344                 return 0;
1345                 break;
1346         }
1347
1348         /*
1349          * We are expecting a minimum of 2 endpoints - in and out (bulk).
1350          * An optional interrupt is OK (necessary for CBI protocol).
1351          * We will ignore any others.
1352          */
1353         for (i = 0; i < iface->desc.bNumEndpoints; i++) {
1354                 ep_desc = &iface->ep_desc[i];
1355                 /* is it an BULK endpoint? */
1356                 if ((ep_desc->bmAttributes &
1357                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
1358                         if (ep_desc->bEndpointAddress & USB_DIR_IN)
1359                                 ss->ep_in = ep_desc->bEndpointAddress &
1360                                                 USB_ENDPOINT_NUMBER_MASK;
1361                         else
1362                                 ss->ep_out =
1363                                         ep_desc->bEndpointAddress &
1364                                         USB_ENDPOINT_NUMBER_MASK;
1365                 }
1366
1367                 /* is it an interrupt endpoint? */
1368                 if ((ep_desc->bmAttributes &
1369                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
1370                         ss->ep_int = ep_desc->bEndpointAddress &
1371                                                 USB_ENDPOINT_NUMBER_MASK;
1372                         ss->irqinterval = ep_desc->bInterval;
1373                 }
1374         }
1375         debug("Endpoints In %d Out %d Int %d\n",
1376               ss->ep_in, ss->ep_out, ss->ep_int);
1377
1378         /* Do some basic sanity checks, and bail if we find a problem */
1379         if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) ||
1380             !ss->ep_in || !ss->ep_out ||
1381             (ss->protocol == US_PR_CBI && ss->ep_int == 0)) {
1382                 debug("Problems with device\n");
1383                 return 0;
1384         }
1385         /* set class specific stuff */
1386         /* We only handle certain protocols.  Currently, these are
1387          * the only ones.
1388          * The SFF8070 accepts the requests used in u-boot
1389          */
1390         if (ss->subclass != US_SC_UFI && ss->subclass != US_SC_SCSI &&
1391             ss->subclass != US_SC_8070) {
1392                 printf("Sorry, protocol %d not yet supported.\n", ss->subclass);
1393                 return 0;
1394         }
1395         if (ss->ep_int) {
1396                 /* we had found an interrupt endpoint, prepare irq pipe
1397                  * set up the IRQ pipe and handler
1398                  */
1399                 ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255;
1400                 ss->irqpipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int);
1401                 ss->irqmaxp = usb_maxpacket(dev, ss->irqpipe);
1402                 dev->irq_handle = usb_stor_irq;
1403         }
1404
1405         /* Set the maximum transfer size per host controller setting */
1406         usb_stor_set_max_xfer_blk(dev, ss);
1407
1408         dev->privptr = (void *)ss;
1409         return 1;
1410 }
1411
1412 int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
1413                       struct blk_desc *dev_desc)
1414 {
1415         unsigned char perq, modi;
1416         ALLOC_CACHE_ALIGN_BUFFER(u32, cap, 2);
1417         ALLOC_CACHE_ALIGN_BUFFER(u8, usb_stor_buf, 36);
1418         u32 capacity, blksz;
1419         struct scsi_cmd *pccb = &usb_ccb;
1420
1421         pccb->pdata = usb_stor_buf;
1422
1423         dev_desc->target = dev->devnum;
1424         pccb->lun = dev_desc->lun;
1425         debug(" address %d\n", dev_desc->target);
1426
1427         if (usb_inquiry(pccb, ss)) {
1428                 debug("%s: usb_inquiry() failed\n", __func__);
1429                 return -1;
1430         }
1431
1432         perq = usb_stor_buf[0];
1433         modi = usb_stor_buf[1];
1434
1435         /*
1436          * Skip unknown devices (0x1f) and enclosure service devices (0x0d),
1437          * they would not respond to test_unit_ready .
1438          */
1439         if (((perq & 0x1f) == 0x1f) || ((perq & 0x1f) == 0x0d)) {
1440                 debug("%s: unknown/unsupported device\n", __func__);
1441                 return 0;
1442         }
1443         if ((modi&0x80) == 0x80) {
1444                 /* drive is removable */
1445                 dev_desc->removable = 1;
1446         }
1447         memcpy(dev_desc->vendor, (const void *)&usb_stor_buf[8], 8);
1448         memcpy(dev_desc->product, (const void *)&usb_stor_buf[16], 16);
1449         memcpy(dev_desc->revision, (const void *)&usb_stor_buf[32], 4);
1450         dev_desc->vendor[8] = 0;
1451         dev_desc->product[16] = 0;
1452         dev_desc->revision[4] = 0;
1453 #ifdef CONFIG_USB_BIN_FIXUP
1454         usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor,
1455                       (uchar *)dev_desc->product);
1456 #endif /* CONFIG_USB_BIN_FIXUP */
1457         debug("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
1458               usb_stor_buf[3]);
1459         if (usb_test_unit_ready(pccb, ss)) {
1460                 printf("Device NOT ready\n"
1461                        "   Request Sense returned %02X %02X %02X\n",
1462                        pccb->sense_buf[2], pccb->sense_buf[12],
1463                        pccb->sense_buf[13]);
1464                 if (dev_desc->removable == 1)
1465                         dev_desc->type = perq;
1466                 return 0;
1467         }
1468         pccb->pdata = (unsigned char *)cap;
1469         memset(pccb->pdata, 0, 8);
1470         if (usb_read_capacity(pccb, ss) != 0) {
1471                 printf("READ_CAP ERROR\n");
1472                 cap[0] = 2880;
1473                 cap[1] = 0x200;
1474         }
1475         ss->flags &= ~USB_READY;
1476         debug("Read Capacity returns: 0x%08x, 0x%08x\n", cap[0], cap[1]);
1477 #if 0
1478         if (cap[0] > (0x200000 * 10)) /* greater than 10 GByte */
1479                 cap[0] >>= 16;
1480
1481         cap[0] = cpu_to_be32(cap[0]);
1482         cap[1] = cpu_to_be32(cap[1]);
1483 #endif
1484
1485         capacity = be32_to_cpu(cap[0]) + 1;
1486         blksz = be32_to_cpu(cap[1]);
1487
1488         debug("Capacity = 0x%08x, blocksz = 0x%08x\n", capacity, blksz);
1489         dev_desc->lba = capacity;
1490         dev_desc->blksz = blksz;
1491         dev_desc->log2blksz = LOG2(dev_desc->blksz);
1492         dev_desc->type = perq;
1493         debug(" address %d\n", dev_desc->target);
1494
1495         return 1;
1496 }
1497
1498 #if CONFIG_IS_ENABLED(DM_USB)
1499
1500 static int usb_mass_storage_probe(struct udevice *dev)
1501 {
1502         struct usb_device *udev = dev_get_parent_priv(dev);
1503         int ret;
1504
1505         usb_disable_asynch(1); /* asynch transfer not allowed */
1506         ret = usb_stor_probe_device(udev);
1507         usb_disable_asynch(0); /* asynch transfer allowed */
1508
1509         return ret;
1510 }
1511
1512 static const struct udevice_id usb_mass_storage_ids[] = {
1513         { .compatible = "usb-mass-storage" },
1514         { }
1515 };
1516
1517 U_BOOT_DRIVER(usb_mass_storage) = {
1518         .name   = "usb_mass_storage",
1519         .id     = UCLASS_MASS_STORAGE,
1520         .of_match = usb_mass_storage_ids,
1521         .probe = usb_mass_storage_probe,
1522 #if CONFIG_IS_ENABLED(BLK)
1523         .platdata_auto_alloc_size       = sizeof(struct us_data),
1524 #endif
1525 };
1526
1527 UCLASS_DRIVER(usb_mass_storage) = {
1528         .id             = UCLASS_MASS_STORAGE,
1529         .name           = "usb_mass_storage",
1530 };
1531
1532 static const struct usb_device_id mass_storage_id_table[] = {
1533         {
1534                 .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
1535                 .bInterfaceClass = USB_CLASS_MASS_STORAGE
1536         },
1537         { }             /* Terminating entry */
1538 };
1539
1540 U_BOOT_USB_DEVICE(usb_mass_storage, mass_storage_id_table);
1541 #endif
1542
1543 #if CONFIG_IS_ENABLED(BLK)
1544 static const struct blk_ops usb_storage_ops = {
1545         .read   = usb_stor_read,
1546         .write  = usb_stor_write,
1547 };
1548
1549 U_BOOT_DRIVER(usb_storage_blk) = {
1550         .name           = "usb_storage_blk",
1551         .id             = UCLASS_BLK,
1552         .ops            = &usb_storage_ops,
1553 };
1554 #else
1555 U_BOOT_LEGACY_BLK(usb) = {
1556         .if_typename    = "usb",
1557         .if_type        = IF_TYPE_USB,
1558         .max_devs       = USB_MAX_STOR_DEV,
1559         .desc           = usb_dev_desc,
1560 };
1561 #endif