common/usb_storage.c

   1 /*
   2  * Most of this source has been derived from the Linux USB
   3  * project:
   4  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   5  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
   6  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
   7  *   (c) 2000 Yggdrasil Computing, Inc.
   8  *
   9  *
  10  * Adapted for U-Boot:
  11  *   (C) Copyright 2001 Denis Peter, MPL AG Switzerland
  12  * Driver model conversion:
  13  *   (C) Copyright 2015 Google, Inc
  14  *
  15  * For BBB support (C) Copyright 2003
  16  * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
  17  *
  18  * BBB support based on /sys/dev/usb/umass.c from
  19  * FreeBSD.
  20  *
  21  * SPDX-License-Identifier:     GPL-2.0+
  22  */
  23
  24 /* Note:
  25  * Currently only the CBI transport protocoll has been implemented, and it
  26  * is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB
  27  * transport protocoll may work as well.
  28  */
  29 /*
  30  * New Note:
  31  * Support for USB Mass Storage Devices (BBB) has been added. It has
  32  * only been tested with USB memory sticks.
  33  */
  34
  35
  36 #include <common.h>
  37 #include <command.h>
  38 #include <dm.h>
  39 #include <errno.h>
  40 #include <inttypes.h>
  41 #include <mapmem.h>
  42 #include <memalign.h>
  43 #include <asm/byteorder.h>
  44 #include <asm/processor.h>
  45 #include <dm/device-internal.h>
  46 #include <dm/lists.h>
  47
  48 #include <part.h>
  49 #include <usb.h>
  50
  51 #undef BBB_COMDAT_TRACE
  52 #undef BBB_XPORT_TRACE
  53
  54 #include <scsi.h>
  55 /* direction table -- this indicates the direction of the data
  56  * transfer for each command code -- a 1 indicates input
  57  */
  58 static const unsigned char us_direction[256/8] = {
  59         0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
  60         0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
  61         0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
  62         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
  63 };
  64 #define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
  65
  66 static ccb usb_ccb __attribute__((aligned(ARCH_DMA_MINALIGN)));
  67 static __u32 CBWTag;
  68
  69 static int usb_max_devs; /* number of highest available usb device */
  70
  71 #ifndef CONFIG_BLK
  72 static struct blk_desc usb_dev_desc[USB_MAX_STOR_DEV];
  73 #endif
  74
  75 struct us_data;
  76 typedef int (*trans_cmnd)(ccb *cb, struct us_data *data);
  77 typedef int (*trans_reset)(struct us_data *data);
  78
  79 struct us_data {
  80         struct usb_device *pusb_dev;     /* this usb_device */
  81
  82         unsigned int    flags;                  /* from filter initially */
  83 #       define USB_READY        (1 << 0)
  84         unsigned char   ifnum;                  /* interface number */
  85         unsigned char   ep_in;                  /* in endpoint */
  86         unsigned char   ep_out;                 /* out ....... */
  87         unsigned char   ep_int;                 /* interrupt . */
  88         unsigned char   subclass;               /* as in overview */
  89         unsigned char   protocol;               /* .............. */
  90         unsigned char   attention_done;         /* force attn on first cmd */
  91         unsigned short  ip_data;                /* interrupt data */
  92         int             action;                 /* what to do */
  93         int             ip_wanted;              /* needed */
  94         int             *irq_handle;            /* for USB int requests */
  95         unsigned int    irqpipe;                /* pipe for release_irq */
  96         unsigned char   irqmaxp;                /* max packed for irq Pipe */
  97         unsigned char   irqinterval;            /* Intervall for IRQ Pipe */
  98         ccb             *srb;                   /* current srb */
  99         trans_reset     transport_reset;        /* reset routine */
 100         trans_cmnd      transport;              /* transport routine */
 101 };
 102
 103 #ifdef CONFIG_USB_EHCI
 104 /*
 105  * The U-Boot EHCI driver can handle any transfer length as long as there is
 106  * enough free heap space left, but the SCSI READ(10) and WRITE(10) commands are
 107  * limited to 65535 blocks.
 108  */
 109 #define USB_MAX_XFER_BLK        65535
 110 #else
 111 #define USB_MAX_XFER_BLK        20
 112 #endif
 113
 114 #ifndef CONFIG_BLK
 115 static struct us_data usb_stor[USB_MAX_STOR_DEV];
 116 #endif
 117
 118 #define USB_STOR_TRANSPORT_GOOD    0
 119 #define USB_STOR_TRANSPORT_FAILED -1
 120 #define USB_STOR_TRANSPORT_ERROR  -2
 121
 122 int usb_stor_get_info(struct usb_device *dev, struct us_data *us,
 123                       struct blk_desc *dev_desc);
 124 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
 125                       struct us_data *ss);
 126 #ifdef CONFIG_BLK
 127 static unsigned long usb_stor_read(struct udevice *dev, lbaint_t blknr,
 128                                    lbaint_t blkcnt, void *buffer);
 129 static unsigned long usb_stor_write(struct udevice *dev, lbaint_t blknr,
 130                                     lbaint_t blkcnt, const void *buffer);
 131 #else
 132 static unsigned long usb_stor_read(struct blk_desc *block_dev, lbaint_t blknr,
 133                                    lbaint_t blkcnt, void *buffer);
 134 static unsigned long usb_stor_write(struct blk_desc *block_dev, lbaint_t blknr,
 135                                     lbaint_t blkcnt, const void *buffer);
 136 #endif
 137 void uhci_show_temp_int_td(void);
 138
 139 static void usb_show_progress(void)
 140 {
 141         debug(".");
 142 }
 143
 144 /*******************************************************************************
 145  * show info on storage devices; 'usb start/init' must be invoked earlier
 146  * as we only retrieve structures populated during devices initialization
 147  */
 148 int usb_stor_info(void)
 149 {
 150         int count = 0;
 151 #ifdef CONFIG_BLK
 152         struct udevice *dev;
 153
 154         for (blk_first_device(IF_TYPE_USB, &dev);
 155              dev;
 156              blk_next_device(&dev)) {
 157                 struct blk_desc *desc = dev_get_uclass_platdata(dev);
 158
 159                 printf("  Device %d: ", desc->devnum);
 160                 dev_print(desc);
 161                 count++;
 162         }
 163 #else
 164         int i;
 165
 166         if (usb_max_devs > 0) {
 167                 for (i = 0; i < usb_max_devs; i++) {
 168                         printf("  Device %d: ", i);
 169                         dev_print(&usb_dev_desc[i]);
 170                 }
 171                 return 0;
 172         }
 173 #endif
 174         if (!count) {
 175                 printf("No storage devices, perhaps not 'usb start'ed..?\n");
 176                 return 1;
 177         }
 178
 179         return 0;
 180 }
 181
 182 static unsigned int usb_get_max_lun(struct us_data *us)
 183 {
 184         int len;
 185         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, result, 1);
 186         len = usb_control_msg(us->pusb_dev,
 187                               usb_rcvctrlpipe(us->pusb_dev, 0),
 188                               US_BBB_GET_MAX_LUN,
 189                               USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 190                               0, us->ifnum,
 191                               result, sizeof(char),
 192                               USB_CNTL_TIMEOUT * 5);
 193         debug("Get Max LUN -> len = %i, result = %i\n", len, (int) *result);
 194         return (len > 0) ? *result : 0;
 195 }
 196
 197 static int usb_stor_probe_device(struct usb_device *udev)
 198 {
 199         int lun, max_lun;
 200
 201 #ifdef CONFIG_BLK
 202         struct us_data *data;
 203         int ret;
 204 #else
 205         int start;
 206
 207         if (udev == NULL)
 208                 return -ENOENT; /* no more devices available */
 209 #endif
 210
 211         debug("\n\nProbing for storage\n");
 212 #ifdef CONFIG_BLK
 213         /*
 214          * We store the us_data in the mass storage device's platdata. It
 215          * is shared by all LUNs (block devices) attached to this mass storage
 216          * device.
 217          */
 218         data = dev_get_platdata(udev->dev);
 219         if (!usb_storage_probe(udev, 0, data))
 220                 return 0;
 221         max_lun = usb_get_max_lun(data);
 222         for (lun = 0; lun <= max_lun; lun++) {
 223                 struct blk_desc *blkdev;
 224                 struct udevice *dev;
 225                 char str[10];
 226
 227                 snprintf(str, sizeof(str), "lun%d", lun);
 228                 ret = blk_create_devicef(udev->dev, "usb_storage_blk", str,
 229                                          IF_TYPE_USB, usb_max_devs, 512, 0,
 230                                          &dev);
 231                 if (ret) {
 232                         debug("Cannot bind driver\n");
 233                         return ret;
 234                 }
 235
 236                 blkdev = dev_get_uclass_platdata(dev);
 237                 blkdev->target = 0xff;
 238                 blkdev->lun = lun;
 239
 240                 ret = usb_stor_get_info(udev, data, blkdev);
 241                 if (ret == 1)
 242                         ret = blk_prepare_device(dev);
 243                 if (!ret) {
 244                         usb_max_devs++;
 245                         debug("%s: Found device %p\n", __func__, udev);
 246                 } else {
 247                         debug("usb_stor_get_info: Invalid device\n");
 248                         ret = device_unbind(dev);
 249                         if (ret)
 250                                 return ret;
 251                 }
 252         }
 253 #else
 254         /* We don't have space to even probe if we hit the maximum */
 255         if (usb_max_devs == USB_MAX_STOR_DEV) {
 256                 printf("max USB Storage Device reached: %d stopping\n",
 257                        usb_max_devs);
 258                 return -ENOSPC;
 259         }
 260
 261         if (!usb_storage_probe(udev, 0, &usb_stor[usb_max_devs]))
 262                 return 0;
 263
 264         /*
 265          * OK, it's a storage device.  Iterate over its LUNs and populate
 266          * usb_dev_desc'
 267          */
 268         start = usb_max_devs;
 269
 270         max_lun = usb_get_max_lun(&usb_stor[usb_max_devs]);
 271         for (lun = 0; lun <= max_lun && usb_max_devs < USB_MAX_STOR_DEV;
 272              lun++) {
 273                 struct blk_desc *blkdev;
 274
 275                 blkdev = &usb_dev_desc[usb_max_devs];
 276                 memset(blkdev, '\0', sizeof(struct blk_desc));
 277                 blkdev->if_type = IF_TYPE_USB;
 278                 blkdev->devnum = usb_max_devs;
 279                 blkdev->part_type = PART_TYPE_UNKNOWN;
 280                 blkdev->target = 0xff;
 281                 blkdev->type = DEV_TYPE_UNKNOWN;
 282                 blkdev->block_read = usb_stor_read;
 283                 blkdev->block_write = usb_stor_write;
 284                 blkdev->lun = lun;
 285                 blkdev->priv = udev;
 286
 287                 if (usb_stor_get_info(udev, &usb_stor[start],
 288                                       &usb_dev_desc[usb_max_devs]) == 1) {
 289                         debug("partype: %d\n", blkdev->part_type);
 290                         part_init(blkdev);
 291                         debug("partype: %d\n", blkdev->part_type);
 292                         usb_max_devs++;
 293                         debug("%s: Found device %p\n", __func__, udev);
 294                 }
 295         }
 296 #endif
 297
 298         return 0;
 299 }
 300
 301 void usb_stor_reset(void)
 302 {
 303         usb_max_devs = 0;
 304 }
 305
 306 /*******************************************************************************
 307  * scan the usb and reports device info
 308  * to the user if mode = 1
 309  * returns current device or -1 if no
 310  */
 311 int usb_stor_scan(int mode)
 312 {
 313         if (mode == 1)
 314                 printf("       scanning usb for storage devices... ");
 315
 316 #ifndef CONFIG_DM_USB
 317         unsigned char i;
 318
 319         usb_disable_asynch(1); /* asynch transfer not allowed */
 320
 321         usb_stor_reset();
 322         for (i = 0; i < USB_MAX_DEVICE; i++) {
 323                 struct usb_device *dev;
 324
 325                 dev = usb_get_dev_index(i); /* get device */
 326                 debug("i=%d\n", i);
 327                 if (usb_stor_probe_device(dev))
 328                         break;
 329         } /* for */
 330
 331         usb_disable_asynch(0); /* asynch transfer allowed */
 332 #endif
 333         printf("%d Storage Device(s) found\n", usb_max_devs);
 334         if (usb_max_devs > 0)
 335                 return 0;
 336         return -1;
 337 }
 338
 339 static int usb_stor_irq(struct usb_device *dev)
 340 {
 341         struct us_data *us;
 342         us = (struct us_data *)dev->privptr;
 343
 344         if (us->ip_wanted)
 345                 us->ip_wanted = 0;
 346         return 0;
 347 }
 348
 349
 350 #ifdef  DEBUG
 351
 352 static void usb_show_srb(ccb *pccb)
 353 {
 354         int i;
 355         printf("SRB: len %d datalen 0x%lX\n ", pccb->cmdlen, pccb->datalen);
 356         for (i = 0; i < 12; i++)
 357                 printf("%02X ", pccb->cmd[i]);
 358         printf("\n");
 359 }
 360
 361 static void display_int_status(unsigned long tmp)
 362 {
 363         printf("Status: %s %s %s %s %s %s %s\n",
 364                 (tmp & USB_ST_ACTIVE) ? "Active" : "",
 365                 (tmp & USB_ST_STALLED) ? "Stalled" : "",
 366                 (tmp & USB_ST_BUF_ERR) ? "Buffer Error" : "",
 367                 (tmp & USB_ST_BABBLE_DET) ? "Babble Det" : "",
 368                 (tmp & USB_ST_NAK_REC) ? "NAKed" : "",
 369                 (tmp & USB_ST_CRC_ERR) ? "CRC Error" : "",
 370                 (tmp & USB_ST_BIT_ERR) ? "Bitstuff Error" : "");
 371 }
 372 #endif
 373 /***********************************************************************
 374  * Data transfer routines
 375  ***********************************************************************/
 376
 377 static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length)
 378 {
 379         int max_size;
 380         int this_xfer;
 381         int result;
 382         int partial;
 383         int maxtry;
 384         int stat;
 385
 386         /* determine the maximum packet size for these transfers */
 387         max_size = usb_maxpacket(us->pusb_dev, pipe) * 16;
 388
 389         /* while we have data left to transfer */
 390         while (length) {
 391
 392                 /* calculate how long this will be -- maximum or a remainder */
 393                 this_xfer = length > max_size ? max_size : length;
 394                 length -= this_xfer;
 395
 396                 /* setup the retry counter */
 397                 maxtry = 10;
 398
 399                 /* set up the transfer loop */
 400                 do {
 401                         /* transfer the data */
 402                         debug("Bulk xfer 0x%lx(%d) try #%d\n",
 403                               (ulong)map_to_sysmem(buf), this_xfer,
 404                               11 - maxtry);
 405                         result = usb_bulk_msg(us->pusb_dev, pipe, buf,
 406                                               this_xfer, &partial,
 407                                               USB_CNTL_TIMEOUT * 5);
 408                         debug("bulk_msg returned %d xferred %d/%d\n",
 409                               result, partial, this_xfer);
 410                         if (us->pusb_dev->status != 0) {
 411                                 /* if we stall, we need to clear it before
 412                                  * we go on
 413                                  */
 414 #ifdef DEBUG
 415                                 display_int_status(us->pusb_dev->status);
 416 #endif
 417                                 if (us->pusb_dev->status & USB_ST_STALLED) {
 418                                         debug("stalled ->clearing endpoint" \
 419                                               "halt for pipe 0x%x\n", pipe);
 420                                         stat = us->pusb_dev->status;
 421                                         usb_clear_halt(us->pusb_dev, pipe);
 422                                         us->pusb_dev->status = stat;
 423                                         if (this_xfer == partial) {
 424                                                 debug("bulk transferred" \
 425                                                       "with error %lX," \
 426                                                       " but data ok\n",
 427                                                       us->pusb_dev->status);
 428                                                 return 0;
 429                                         }
 430                                         else
 431                                                 return result;
 432                                 }
 433                                 if (us->pusb_dev->status & USB_ST_NAK_REC) {
 434                                         debug("Device NAKed bulk_msg\n");
 435                                         return result;
 436                                 }
 437                                 debug("bulk transferred with error");
 438                                 if (this_xfer == partial) {
 439                                         debug(" %ld, but data ok\n",
 440                                               us->pusb_dev->status);
 441                                         return 0;
 442                                 }
 443                                 /* if our try counter reaches 0, bail out */
 444                                         debug(" %ld, data %d\n",
 445                                               us->pusb_dev->status, partial);
 446                                 if (!maxtry--)
 447                                                 return result;
 448                         }
 449                         /* update to show what data was transferred */
 450                         this_xfer -= partial;
 451                         buf += partial;
 452                         /* continue until this transfer is done */
 453                 } while (this_xfer);
 454         }
 455
 456         /* if we get here, we're done and successful */
 457         return 0;
 458 }
 459
 460 static int usb_stor_BBB_reset(struct us_data *us)
 461 {
 462         int result;
 463         unsigned int pipe;
 464
 465         /*
 466          * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
 467          *
 468          * For Reset Recovery the host shall issue in the following order:
 469          * a) a Bulk-Only Mass Storage Reset
 470          * b) a Clear Feature HALT to the Bulk-In endpoint
 471          * c) a Clear Feature HALT to the Bulk-Out endpoint
 472          *
 473          * This is done in 3 steps.
 474          *
 475          * If the reset doesn't succeed, the device should be port reset.
 476          *
 477          * This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
 478          */
 479         debug("BBB_reset\n");
 480         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 481                                  US_BBB_RESET,
 482                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 483                                  0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5);
 484
 485         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 486                 debug("RESET:stall\n");
 487                 return -1;
 488         }
 489
 490         /* long wait for reset */
 491         mdelay(150);
 492         debug("BBB_reset result %d: status %lX reset\n",
 493               result, us->pusb_dev->status);
 494         pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 495         result = usb_clear_halt(us->pusb_dev, pipe);
 496         /* long wait for reset */
 497         mdelay(150);
 498         debug("BBB_reset result %d: status %lX clearing IN endpoint\n",
 499               result, us->pusb_dev->status);
 500         /* long wait for reset */
 501         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 502         result = usb_clear_halt(us->pusb_dev, pipe);
 503         mdelay(150);
 504         debug("BBB_reset result %d: status %lX clearing OUT endpoint\n",
 505               result, us->pusb_dev->status);
 506         debug("BBB_reset done\n");
 507         return 0;
 508 }
 509
 510 /* FIXME: this reset function doesn't really reset the port, and it
 511  * should. Actually it should probably do what it's doing here, and
 512  * reset the port physically
 513  */
 514 static int usb_stor_CB_reset(struct us_data *us)
 515 {
 516         unsigned char cmd[12];
 517         int result;
 518
 519         debug("CB_reset\n");
 520         memset(cmd, 0xff, sizeof(cmd));
 521         cmd[0] = SCSI_SEND_DIAG;
 522         cmd[1] = 4;
 523         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 524                                  US_CBI_ADSC,
 525                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 526                                  0, us->ifnum, cmd, sizeof(cmd),
 527                                  USB_CNTL_TIMEOUT * 5);
 528
 529         /* long wait for reset */
 530         mdelay(1500);
 531         debug("CB_reset result %d: status %lX clearing endpoint halt\n",
 532               result, us->pusb_dev->status);
 533         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in));
 534         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out));
 535
 536         debug("CB_reset done\n");
 537         return 0;
 538 }
 539
 540 /*
 541  * Set up the command for a BBB device. Note that the actual SCSI
 542  * command is copied into cbw.CBWCDB.
 543  */
 544 static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
 545 {
 546         int result;
 547         int actlen;
 548         int dir_in;
 549         unsigned int pipe;
 550         ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_cbw, cbw, 1);
 551
 552         dir_in = US_DIRECTION(srb->cmd[0]);
 553
 554 #ifdef BBB_COMDAT_TRACE
 555         printf("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n",
 556                 dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen,
 557                 srb->pdata);
 558         if (srb->cmdlen) {
 559                 for (result = 0; result < srb->cmdlen; result++)
 560                         printf("cmd[%d] %#x ", result, srb->cmd[result]);
 561                 printf("\n");
 562         }
 563 #endif
 564         /* sanity checks */
 565         if (!(srb->cmdlen <= CBWCDBLENGTH)) {
 566                 debug("usb_stor_BBB_comdat:cmdlen too large\n");
 567                 return -1;
 568         }
 569
 570         /* always OUT to the ep */
 571         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 572
 573         cbw->dCBWSignature = cpu_to_le32(CBWSIGNATURE);
 574         cbw->dCBWTag = cpu_to_le32(CBWTag++);
 575         cbw->dCBWDataTransferLength = cpu_to_le32(srb->datalen);
 576         cbw->bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
 577         cbw->bCBWLUN = srb->lun;
 578         cbw->bCDBLength = srb->cmdlen;
 579         /* copy the command data into the CBW command data buffer */
 580         /* DST SRC LEN!!! */
 581
 582         memcpy(cbw->CBWCDB, srb->cmd, srb->cmdlen);
 583         result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE,
 584                               &actlen, USB_CNTL_TIMEOUT * 5);
 585         if (result < 0)
 586                 debug("usb_stor_BBB_comdat:usb_bulk_msg error\n");
 587         return result;
 588 }
 589
 590 /* FIXME: we also need a CBI_command which sets up the completion
 591  * interrupt, and waits for it
 592  */
 593 static int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
 594 {
 595         int result = 0;
 596         int dir_in, retry;
 597         unsigned int pipe;
 598         unsigned long status;
 599
 600         retry = 5;
 601         dir_in = US_DIRECTION(srb->cmd[0]);
 602
 603         if (dir_in)
 604                 pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 605         else
 606                 pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 607
 608         while (retry--) {
 609                 debug("CBI gets a command: Try %d\n", 5 - retry);
 610 #ifdef DEBUG
 611                 usb_show_srb(srb);
 612 #endif
 613                 /* let's send the command via the control pipe */
 614                 result = usb_control_msg(us->pusb_dev,
 615                                          usb_sndctrlpipe(us->pusb_dev , 0),
 616                                          US_CBI_ADSC,
 617                                          USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 618                                          0, us->ifnum,
 619                                          srb->cmd, srb->cmdlen,
 620                                          USB_CNTL_TIMEOUT * 5);
 621                 debug("CB_transport: control msg returned %d, status %lX\n",
 622                       result, us->pusb_dev->status);
 623                 /* check the return code for the command */
 624                 if (result < 0) {
 625                         if (us->pusb_dev->status & USB_ST_STALLED) {
 626                                 status = us->pusb_dev->status;
 627                                 debug(" stall during command found," \
 628                                       " clear pipe\n");
 629                                 usb_clear_halt(us->pusb_dev,
 630                                               usb_sndctrlpipe(us->pusb_dev, 0));
 631                                 us->pusb_dev->status = status;
 632                         }
 633                         debug(" error during command %02X" \
 634                               " Stat = %lX\n", srb->cmd[0],
 635                               us->pusb_dev->status);
 636                         return result;
 637                 }
 638                 /* transfer the data payload for this command, if one exists*/
 639
 640                 debug("CB_transport: control msg returned %d," \
 641                       " direction is %s to go 0x%lx\n", result,
 642                       dir_in ? "IN" : "OUT", srb->datalen);
 643                 if (srb->datalen) {
 644                         result = us_one_transfer(us, pipe, (char *)srb->pdata,
 645                                                  srb->datalen);
 646                         debug("CBI attempted to transfer data," \
 647                               " result is %d status %lX, len %d\n",
 648                               result, us->pusb_dev->status,
 649                                 us->pusb_dev->act_len);
 650                         if (!(us->pusb_dev->status & USB_ST_NAK_REC))
 651                                 break;
 652                 } /* if (srb->datalen) */
 653                 else
 654                         break;
 655         }
 656         /* return result */
 657
 658         return result;
 659 }
 660
 661
 662 static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
 663 {
 664         int timeout;
 665
 666         us->ip_wanted = 1;
 667         submit_int_msg(us->pusb_dev, us->irqpipe,
 668                         (void *) &us->ip_data, us->irqmaxp, us->irqinterval);
 669         timeout = 1000;
 670         while (timeout--) {
 671                 if (us->ip_wanted == 0)
 672                         break;
 673                 mdelay(10);
 674         }
 675         if (us->ip_wanted) {
 676                 printf("        Did not get interrupt on CBI\n");
 677                 us->ip_wanted = 0;
 678                 return USB_STOR_TRANSPORT_ERROR;
 679         }
 680         debug("Got interrupt data 0x%x, transferred %d status 0x%lX\n",
 681               us->ip_data, us->pusb_dev->irq_act_len,
 682               us->pusb_dev->irq_status);
 683         /* UFI gives us ASC and ASCQ, like a request sense */
 684         if (us->subclass == US_SC_UFI) {
 685                 if (srb->cmd[0] == SCSI_REQ_SENSE ||
 686                     srb->cmd[0] == SCSI_INQUIRY)
 687                         return USB_STOR_TRANSPORT_GOOD; /* Good */
 688                 else if (us->ip_data)
 689                         return USB_STOR_TRANSPORT_FAILED;
 690                 else
 691                         return USB_STOR_TRANSPORT_GOOD;
 692         }
 693         /* otherwise, we interpret the data normally */
 694         switch (us->ip_data) {
 695         case 0x0001:
 696                 return USB_STOR_TRANSPORT_GOOD;
 697         case 0x0002:
 698                 return USB_STOR_TRANSPORT_FAILED;
 699         default:
 700                 return USB_STOR_TRANSPORT_ERROR;
 701         }                       /* switch */
 702         return USB_STOR_TRANSPORT_ERROR;
 703 }
 704
 705 #define USB_TRANSPORT_UNKNOWN_RETRY 5
 706 #define USB_TRANSPORT_NOT_READY_RETRY 10
 707
 708 /* clear a stall on an endpoint - special for BBB devices */
 709 static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
 710 {
 711         /* ENDPOINT_HALT = 0, so set value to 0 */
 712         return usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 713                                USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0,
 714                                endpt, NULL, 0, USB_CNTL_TIMEOUT * 5);
 715 }
 716
 717 static int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
 718 {
 719         int result, retry;
 720         int dir_in;
 721         int actlen, data_actlen;
 722         unsigned int pipe, pipein, pipeout;
 723         ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_csw, csw, 1);
 724 #ifdef BBB_XPORT_TRACE
 725         unsigned char *ptr;
 726         int index;
 727 #endif
 728
 729         dir_in = US_DIRECTION(srb->cmd[0]);
 730
 731         /* COMMAND phase */
 732         debug("COMMAND phase\n");
 733         result = usb_stor_BBB_comdat(srb, us);
 734         if (result < 0) {
 735                 debug("failed to send CBW status %ld\n",
 736                       us->pusb_dev->status);
 737                 usb_stor_BBB_reset(us);
 738                 return USB_STOR_TRANSPORT_FAILED;
 739         }
 740         if (!(us->flags & USB_READY))
 741                 mdelay(5);
 742         pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 743         pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 744         /* DATA phase + error handling */
 745         data_actlen = 0;
 746         /* no data, go immediately to the STATUS phase */
 747         if (srb->datalen == 0)
 748                 goto st;
 749         debug("DATA phase\n");
 750         if (dir_in)
 751                 pipe = pipein;
 752         else
 753                 pipe = pipeout;
 754
 755         result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, srb->datalen,
 756                               &data_actlen, USB_CNTL_TIMEOUT * 5);
 757         /* special handling of STALL in DATA phase */
 758         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 759                 debug("DATA:stall\n");
 760                 /* clear the STALL on the endpoint */
 761                 result = usb_stor_BBB_clear_endpt_stall(us,
 762                                         dir_in ? us->ep_in : us->ep_out);
 763                 if (result >= 0)
 764                         /* continue on to STATUS phase */
 765                         goto st;
 766         }
 767         if (result < 0) {
 768                 debug("usb_bulk_msg error status %ld\n",
 769                       us->pusb_dev->status);
 770                 usb_stor_BBB_reset(us);
 771                 return USB_STOR_TRANSPORT_FAILED;
 772         }
 773 #ifdef BBB_XPORT_TRACE
 774         for (index = 0; index < data_actlen; index++)
 775                 printf("pdata[%d] %#x ", index, srb->pdata[index]);
 776         printf("\n");
 777 #endif
 778         /* STATUS phase + error handling */
 779 st:
 780         retry = 0;
 781 again:
 782         debug("STATUS phase\n");
 783         result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE,
 784                                 &actlen, USB_CNTL_TIMEOUT*5);
 785
 786         /* special handling of STALL in STATUS phase */
 787         if ((result < 0) && (retry < 1) &&
 788             (us->pusb_dev->status & USB_ST_STALLED)) {
 789                 debug("STATUS:stall\n");
 790                 /* clear the STALL on the endpoint */
 791                 result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
 792                 if (result >= 0 && (retry++ < 1))
 793                         /* do a retry */
 794                         goto again;
 795         }
 796         if (result < 0) {
 797                 debug("usb_bulk_msg error status %ld\n",
 798                       us->pusb_dev->status);
 799                 usb_stor_BBB_reset(us);
 800                 return USB_STOR_TRANSPORT_FAILED;
 801         }
 802 #ifdef BBB_XPORT_TRACE
 803         ptr = (unsigned char *)csw;
 804         for (index = 0; index < UMASS_BBB_CSW_SIZE; index++)
 805                 printf("ptr[%d] %#x ", index, ptr[index]);
 806         printf("\n");
 807 #endif
 808         /* misuse pipe to get the residue */
 809         pipe = le32_to_cpu(csw->dCSWDataResidue);
 810         if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
 811                 pipe = srb->datalen - data_actlen;
 812         if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) {
 813                 debug("!CSWSIGNATURE\n");
 814                 usb_stor_BBB_reset(us);
 815                 return USB_STOR_TRANSPORT_FAILED;
 816         } else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) {
 817                 debug("!Tag\n");
 818                 usb_stor_BBB_reset(us);
 819                 return USB_STOR_TRANSPORT_FAILED;
 820         } else if (csw->bCSWStatus > CSWSTATUS_PHASE) {
 821                 debug(">PHASE\n");
 822                 usb_stor_BBB_reset(us);
 823                 return USB_STOR_TRANSPORT_FAILED;
 824         } else if (csw->bCSWStatus == CSWSTATUS_PHASE) {
 825                 debug("=PHASE\n");
 826                 usb_stor_BBB_reset(us);
 827                 return USB_STOR_TRANSPORT_FAILED;
 828         } else if (data_actlen > srb->datalen) {
 829                 debug("transferred %dB instead of %ldB\n",
 830                       data_actlen, srb->datalen);
 831                 return USB_STOR_TRANSPORT_FAILED;
 832         } else if (csw->bCSWStatus == CSWSTATUS_FAILED) {
 833                 debug("FAILED\n");
 834                 return USB_STOR_TRANSPORT_FAILED;
 835         }
 836
 837         return result;
 838 }
 839
 840 static int usb_stor_CB_transport(ccb *srb, struct us_data *us)
 841 {
 842         int result, status;
 843         ccb *psrb;
 844         ccb reqsrb;
 845         int retry, notready;
 846
 847         psrb = &reqsrb;
 848         status = USB_STOR_TRANSPORT_GOOD;
 849         retry = 0;
 850         notready = 0;
 851         /* issue the command */
 852 do_retry:
 853         result = usb_stor_CB_comdat(srb, us);
 854         debug("command / Data returned %d, status %lX\n",
 855               result, us->pusb_dev->status);
 856         /* if this is an CBI Protocol, get IRQ */
 857         if (us->protocol == US_PR_CBI) {
 858                 status = usb_stor_CBI_get_status(srb, us);
 859                 /* if the status is error, report it */
 860                 if (status == USB_STOR_TRANSPORT_ERROR) {
 861                         debug(" USB CBI Command Error\n");
 862                         return status;
 863                 }
 864                 srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8);
 865                 srb->sense_buf[13] = (unsigned char)(us->ip_data & 0xff);
 866                 if (!us->ip_data) {
 867                         /* if the status is good, report it */
 868                         if (status == USB_STOR_TRANSPORT_GOOD) {
 869                                 debug(" USB CBI Command Good\n");
 870                                 return status;
 871                         }
 872                 }
 873         }
 874         /* do we have to issue an auto request? */
 875         /* HERE we have to check the result */
 876         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 877                 debug("ERROR %lX\n", us->pusb_dev->status);
 878                 us->transport_reset(us);
 879                 return USB_STOR_TRANSPORT_ERROR;
 880         }
 881         if ((us->protocol == US_PR_CBI) &&
 882             ((srb->cmd[0] == SCSI_REQ_SENSE) ||
 883             (srb->cmd[0] == SCSI_INQUIRY))) {
 884                 /* do not issue an autorequest after request sense */
 885                 debug("No auto request and good\n");
 886                 return USB_STOR_TRANSPORT_GOOD;
 887         }
 888         /* issue an request_sense */
 889         memset(&psrb->cmd[0], 0, 12);
 890         psrb->cmd[0] = SCSI_REQ_SENSE;
 891         psrb->cmd[1] = srb->lun << 5;
 892         psrb->cmd[4] = 18;
 893         psrb->datalen = 18;
 894         psrb->pdata = &srb->sense_buf[0];
 895         psrb->cmdlen = 12;
 896         /* issue the command */
 897         result = usb_stor_CB_comdat(psrb, us);
 898         debug("auto request returned %d\n", result);
 899         /* if this is an CBI Protocol, get IRQ */
 900         if (us->protocol == US_PR_CBI)
 901                 status = usb_stor_CBI_get_status(psrb, us);
 902
 903         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 904                 debug(" AUTO REQUEST ERROR %ld\n",
 905                       us->pusb_dev->status);
 906                 return USB_STOR_TRANSPORT_ERROR;
 907         }
 908         debug("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
 909               srb->sense_buf[0], srb->sense_buf[2],
 910               srb->sense_buf[12], srb->sense_buf[13]);
 911         /* Check the auto request result */
 912         if ((srb->sense_buf[2] == 0) &&
 913             (srb->sense_buf[12] == 0) &&
 914             (srb->sense_buf[13] == 0)) {
 915                 /* ok, no sense */
 916                 return USB_STOR_TRANSPORT_GOOD;
 917         }
 918
 919         /* Check the auto request result */
 920         switch (srb->sense_buf[2]) {
 921         case 0x01:
 922                 /* Recovered Error */
 923                 return USB_STOR_TRANSPORT_GOOD;
 924                 break;
 925         case 0x02:
 926                 /* Not Ready */
 927                 if (notready++ > USB_TRANSPORT_NOT_READY_RETRY) {
 928                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 929                                " 0x%02X (NOT READY)\n", srb->cmd[0],
 930                                 srb->sense_buf[0], srb->sense_buf[2],
 931                                 srb->sense_buf[12], srb->sense_buf[13]);
 932                         return USB_STOR_TRANSPORT_FAILED;
 933                 } else {
 934                         mdelay(100);
 935                         goto do_retry;
 936                 }
 937                 break;
 938         default:
 939                 if (retry++ > USB_TRANSPORT_UNKNOWN_RETRY) {
 940                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 941                                " 0x%02X\n", srb->cmd[0], srb->sense_buf[0],
 942                                 srb->sense_buf[2], srb->sense_buf[12],
 943                                 srb->sense_buf[13]);
 944                         return USB_STOR_TRANSPORT_FAILED;
 945                 } else
 946                         goto do_retry;
 947                 break;
 948         }
 949         return USB_STOR_TRANSPORT_FAILED;
 950 }
 951
 952
 953 static int usb_inquiry(ccb *srb, struct us_data *ss)
 954 {
 955         int retry, i;
 956         retry = 5;
 957         do {
 958                 memset(&srb->cmd[0], 0, 12);
 959                 srb->cmd[0] = SCSI_INQUIRY;
 960                 srb->cmd[1] = srb->lun << 5;
 961                 srb->cmd[4] = 36;
 962                 srb->datalen = 36;
 963                 srb->cmdlen = 12;
 964                 i = ss->transport(srb, ss);
 965                 debug("inquiry returns %d\n", i);
 966                 if (i == 0)
 967                         break;
 968         } while (--retry);
 969
 970         if (!retry) {
 971                 printf("error in inquiry\n");
 972                 return -1;
 973         }
 974         return 0;
 975 }
 976
 977 static int usb_request_sense(ccb *srb, struct us_data *ss)
 978 {
 979         char *ptr;
 980
 981         ptr = (char *)srb->pdata;
 982         memset(&srb->cmd[0], 0, 12);
 983         srb->cmd[0] = SCSI_REQ_SENSE;
 984         srb->cmd[1] = srb->lun << 5;
 985         srb->cmd[4] = 18;
 986         srb->datalen = 18;
 987         srb->pdata = &srb->sense_buf[0];
 988         srb->cmdlen = 12;
 989         ss->transport(srb, ss);
 990         debug("Request Sense returned %02X %02X %02X\n",
 991               srb->sense_buf[2], srb->sense_buf[12],
 992               srb->sense_buf[13]);
 993         srb->pdata = (uchar *)ptr;
 994         return 0;
 995 }
 996
 997 static int usb_test_unit_ready(ccb *srb, struct us_data *ss)
 998 {
 999         int retries = 10;
1000
1001         do {
1002                 memset(&srb->cmd[0], 0, 12);
1003                 srb->cmd[0] = SCSI_TST_U_RDY;
1004                 srb->cmd[1] = srb->lun << 5;
1005                 srb->datalen = 0;
1006                 srb->cmdlen = 12;
1007                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD) {
1008                         ss->flags |= USB_READY;
1009                         return 0;
1010                 }
1011                 usb_request_sense(srb, ss);
1012                 /*
1013                  * Check the Key Code Qualifier, if it matches
1014                  * "Not Ready - medium not present"
1015                  * (the sense Key equals 0x2 and the ASC is 0x3a)
1016                  * return immediately as the medium being absent won't change
1017                  * unless there is a user action.
1018                  */
1019                 if ((srb->sense_buf[2] == 0x02) &&
1020                     (srb->sense_buf[12] == 0x3a))
1021                         return -1;
1022                 mdelay(100);
1023         } while (retries--);
1024
1025         return -1;
1026 }
1027
1028 static int usb_read_capacity(ccb *srb, struct us_data *ss)
1029 {
1030         int retry;
1031         /* XXX retries */
1032         retry = 3;
1033         do {
1034                 memset(&srb->cmd[0], 0, 12);
1035                 srb->cmd[0] = SCSI_RD_CAPAC;
1036                 srb->cmd[1] = srb->lun << 5;
1037                 srb->datalen = 8;
1038                 srb->cmdlen = 12;
1039                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
1040                         return 0;
1041         } while (retry--);
1042
1043         return -1;
1044 }
1045
1046 static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start,
1047                        unsigned short blocks)
1048 {
1049         memset(&srb->cmd[0], 0, 12);
1050         srb->cmd[0] = SCSI_READ10;
1051         srb->cmd[1] = srb->lun << 5;
1052         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
1053         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
1054         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
1055         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
1056         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
1057         srb->cmd[8] = (unsigned char) blocks & 0xff;
1058         srb->cmdlen = 12;
1059         debug("read10: start %lx blocks %x\n", start, blocks);
1060         return ss->transport(srb, ss);
1061 }
1062
1063 static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start,
1064                         unsigned short blocks)
1065 {
1066         memset(&srb->cmd[0], 0, 12);
1067         srb->cmd[0] = SCSI_WRITE10;
1068         srb->cmd[1] = srb->lun << 5;
1069         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
1070         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
1071         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
1072         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
1073         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
1074         srb->cmd[8] = (unsigned char) blocks & 0xff;
1075         srb->cmdlen = 12;
1076         debug("write10: start %lx blocks %x\n", start, blocks);
1077         return ss->transport(srb, ss);
1078 }
1079
1080
1081 #ifdef CONFIG_USB_BIN_FIXUP
1082 /*
1083  * Some USB storage devices queried for SCSI identification data respond with
1084  * binary strings, which if output to the console freeze the terminal. The
1085  * workaround is to modify the vendor and product strings read from such
1086  * device with proper values (as reported by 'usb info').
1087  *
1088  * Vendor and product length limits are taken from the definition of
1089  * struct blk_desc in include/part.h.
1090  */
1091 static void usb_bin_fixup(struct usb_device_descriptor descriptor,
1092                                 unsigned char vendor[],
1093                                 unsigned char product[]) {
1094         const unsigned char max_vendor_len = 40;
1095         const unsigned char max_product_len = 20;
1096         if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
1097                 strncpy((char *)vendor, "SMSC", max_vendor_len);
1098                 strncpy((char *)product, "Flash Media Cntrller",
1099                         max_product_len);
1100         }
1101 }
1102 #endif /* CONFIG_USB_BIN_FIXUP */
1103
1104 #ifdef CONFIG_BLK
1105 static unsigned long usb_stor_read(struct udevice *dev, lbaint_t blknr,
1106                                    lbaint_t blkcnt, void *buffer)
1107 #else
1108 static unsigned long usb_stor_read(struct blk_desc *block_dev, lbaint_t blknr,
1109                                    lbaint_t blkcnt, void *buffer)
1110 #endif
1111 {
1112         lbaint_t start, blks;
1113         uintptr_t buf_addr;
1114         unsigned short smallblks;
1115         struct usb_device *udev;
1116         struct us_data *ss;
1117         int retry;
1118         ccb *srb = &usb_ccb;
1119 #ifdef CONFIG_BLK
1120         struct blk_desc *block_dev;
1121 #endif
1122
1123         if (blkcnt == 0)
1124                 return 0;
1125         /* Setup  device */
1126 #ifdef CONFIG_BLK
1127         block_dev = dev_get_uclass_platdata(dev);
1128         udev = dev_get_parent_priv(dev_get_parent(dev));
1129         debug("\nusb_read: udev %d\n", block_dev->devnum);
1130 #else
1131         debug("\nusb_read: udev %d\n", block_dev->devnum);
1132         udev = usb_dev_desc[block_dev->devnum].priv;
1133         if (!udev) {
1134                 debug("%s: No device\n", __func__);
1135                 return 0;
1136         }
1137 #endif
1138         ss = (struct us_data *)udev->privptr;
1139
1140         usb_disable_asynch(1); /* asynch transfer not allowed */
1141         srb->lun = block_dev->lun;
1142         buf_addr = (uintptr_t)buffer;
1143         start = blknr;
1144         blks = blkcnt;
1145
1146         debug("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF " buffer %"
1147               PRIxPTR "\n", block_dev->devnum, start, blks, buf_addr);
1148
1149         do {
1150                 /* XXX need some comment here */
1151                 retry = 2;
1152                 srb->pdata = (unsigned char *)buf_addr;
1153                 if (blks > USB_MAX_XFER_BLK)
1154                         smallblks = USB_MAX_XFER_BLK;
1155                 else
1156                         smallblks = (unsigned short) blks;
1157 retry_it:
1158                 if (smallblks == USB_MAX_XFER_BLK)
1159                         usb_show_progress();
1160                 srb->datalen = block_dev->blksz * smallblks;
1161                 srb->pdata = (unsigned char *)buf_addr;
1162                 if (usb_read_10(srb, ss, start, smallblks)) {
1163                         debug("Read ERROR\n");
1164                         usb_request_sense(srb, ss);
1165                         if (retry--)
1166                                 goto retry_it;
1167                         blkcnt -= blks;
1168                         break;
1169                 }
1170                 start += smallblks;
1171                 blks -= smallblks;
1172                 buf_addr += srb->datalen;
1173         } while (blks != 0);
1174         ss->flags &= ~USB_READY;
1175
1176         debug("usb_read: end startblk " LBAF
1177               ", blccnt %x buffer %" PRIxPTR "\n",
1178               start, smallblks, buf_addr);
1179
1180         usb_disable_asynch(0); /* asynch transfer allowed */
1181         if (blkcnt >= USB_MAX_XFER_BLK)
1182                 debug("\n");
1183         return blkcnt;
1184 }
1185
1186 #ifdef CONFIG_BLK
1187 static unsigned long usb_stor_write(struct udevice *dev, lbaint_t blknr,
1188                                     lbaint_t blkcnt, const void *buffer)
1189 #else
1190 static unsigned long usb_stor_write(struct blk_desc *block_dev, lbaint_t blknr,
1191                                     lbaint_t blkcnt, const void *buffer)
1192 #endif
1193 {
1194         lbaint_t start, blks;
1195         uintptr_t buf_addr;
1196         unsigned short smallblks;
1197         struct usb_device *udev;
1198         struct us_data *ss;
1199         int retry;
1200         ccb *srb = &usb_ccb;
1201 #ifdef CONFIG_BLK
1202         struct blk_desc *block_dev;
1203 #endif
1204
1205         if (blkcnt == 0)
1206                 return 0;
1207
1208         /* Setup  device */
1209 #ifdef CONFIG_BLK
1210         block_dev = dev_get_uclass_platdata(dev);
1211         udev = dev_get_parent_priv(dev_get_parent(dev));
1212         debug("\nusb_read: udev %d\n", block_dev->devnum);
1213 #else
1214         debug("\nusb_read: udev %d\n", block_dev->devnum);
1215         udev = usb_dev_desc[block_dev->devnum].priv;
1216         if (!udev) {
1217                 debug("%s: No device\n", __func__);
1218                 return 0;
1219         }
1220 #endif
1221         ss = (struct us_data *)udev->privptr;
1222
1223         usb_disable_asynch(1); /* asynch transfer not allowed */
1224
1225         srb->lun = block_dev->lun;
1226         buf_addr = (uintptr_t)buffer;
1227         start = blknr;
1228         blks = blkcnt;
1229
1230         debug("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF " buffer %"
1231               PRIxPTR "\n", block_dev->devnum, start, blks, buf_addr);
1232
1233         do {
1234                 /* If write fails retry for max retry count else
1235                  * return with number of blocks written successfully.
1236                  */
1237                 retry = 2;
1238                 srb->pdata = (unsigned char *)buf_addr;
1239                 if (blks > USB_MAX_XFER_BLK)
1240                         smallblks = USB_MAX_XFER_BLK;
1241                 else
1242                         smallblks = (unsigned short) blks;
1243 retry_it:
1244                 if (smallblks == USB_MAX_XFER_BLK)
1245                         usb_show_progress();
1246                 srb->datalen = block_dev->blksz * smallblks;
1247                 srb->pdata = (unsigned char *)buf_addr;
1248                 if (usb_write_10(srb, ss, start, smallblks)) {
1249                         debug("Write ERROR\n");
1250                         usb_request_sense(srb, ss);
1251                         if (retry--)
1252                                 goto retry_it;
1253                         blkcnt -= blks;
1254                         break;
1255                 }
1256                 start += smallblks;
1257                 blks -= smallblks;
1258                 buf_addr += srb->datalen;
1259         } while (blks != 0);
1260         ss->flags &= ~USB_READY;
1261
1262         debug("usb_write: end startblk " LBAF ", blccnt %x buffer %"
1263               PRIxPTR "\n", start, smallblks, buf_addr);
1264
1265         usb_disable_asynch(0); /* asynch transfer allowed */
1266         if (blkcnt >= USB_MAX_XFER_BLK)
1267                 debug("\n");
1268         return blkcnt;
1269
1270 }
1271
1272 /* Probe to see if a new device is actually a Storage device */
1273 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
1274                       struct us_data *ss)
1275 {
1276         struct usb_interface *iface;
1277         int i;
1278         struct usb_endpoint_descriptor *ep_desc;
1279         unsigned int flags = 0;
1280
1281         /* let's examine the device now */
1282         iface = &dev->config.if_desc[ifnum];
1283
1284         if (dev->descriptor.bDeviceClass != 0 ||
1285                         iface->desc.bInterfaceClass != USB_CLASS_MASS_STORAGE ||
1286                         iface->desc.bInterfaceSubClass < US_SC_MIN ||
1287                         iface->desc.bInterfaceSubClass > US_SC_MAX) {
1288                 debug("Not mass storage\n");
1289                 /* if it's not a mass storage, we go no further */
1290                 return 0;
1291         }
1292
1293         memset(ss, 0, sizeof(struct us_data));
1294
1295         /* At this point, we know we've got a live one */
1296         debug("\n\nUSB Mass Storage device detected\n");
1297
1298         /* Initialize the us_data structure with some useful info */
1299         ss->flags = flags;
1300         ss->ifnum = ifnum;
1301         ss->pusb_dev = dev;
1302         ss->attention_done = 0;
1303         ss->subclass = iface->desc.bInterfaceSubClass;
1304         ss->protocol = iface->desc.bInterfaceProtocol;
1305
1306         /* set the handler pointers based on the protocol */
1307         debug("Transport: ");
1308         switch (ss->protocol) {
1309         case US_PR_CB:
1310                 debug("Control/Bulk\n");
1311                 ss->transport = usb_stor_CB_transport;
1312                 ss->transport_reset = usb_stor_CB_reset;
1313                 break;
1314
1315         case US_PR_CBI:
1316                 debug("Control/Bulk/Interrupt\n");
1317                 ss->transport = usb_stor_CB_transport;
1318                 ss->transport_reset = usb_stor_CB_reset;
1319                 break;
1320         case US_PR_BULK:
1321                 debug("Bulk/Bulk/Bulk\n");
1322                 ss->transport = usb_stor_BBB_transport;
1323                 ss->transport_reset = usb_stor_BBB_reset;
1324                 break;
1325         default:
1326                 printf("USB Storage Transport unknown / not yet implemented\n");
1327                 return 0;
1328                 break;
1329         }
1330
1331         /*
1332          * We are expecting a minimum of 2 endpoints - in and out (bulk).
1333          * An optional interrupt is OK (necessary for CBI protocol).
1334          * We will ignore any others.
1335          */
1336         for (i = 0; i < iface->desc.bNumEndpoints; i++) {
1337                 ep_desc = &iface->ep_desc[i];
1338                 /* is it an BULK endpoint? */
1339                 if ((ep_desc->bmAttributes &
1340                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
1341                         if (ep_desc->bEndpointAddress & USB_DIR_IN)
1342                                 ss->ep_in = ep_desc->bEndpointAddress &
1343                                                 USB_ENDPOINT_NUMBER_MASK;
1344                         else
1345                                 ss->ep_out =
1346                                         ep_desc->bEndpointAddress &
1347                                         USB_ENDPOINT_NUMBER_MASK;
1348                 }
1349
1350                 /* is it an interrupt endpoint? */
1351                 if ((ep_desc->bmAttributes &
1352                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
1353                         ss->ep_int = ep_desc->bEndpointAddress &
1354                                                 USB_ENDPOINT_NUMBER_MASK;
1355                         ss->irqinterval = ep_desc->bInterval;
1356                 }
1357         }
1358         debug("Endpoints In %d Out %d Int %d\n",
1359               ss->ep_in, ss->ep_out, ss->ep_int);
1360
1361         /* Do some basic sanity checks, and bail if we find a problem */
1362         if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) ||
1363             !ss->ep_in || !ss->ep_out ||
1364             (ss->protocol == US_PR_CBI && ss->ep_int == 0)) {
1365                 debug("Problems with device\n");
1366                 return 0;
1367         }
1368         /* set class specific stuff */
1369         /* We only handle certain protocols.  Currently, these are
1370          * the only ones.
1371          * The SFF8070 accepts the requests used in u-boot
1372          */
1373         if (ss->subclass != US_SC_UFI && ss->subclass != US_SC_SCSI &&
1374             ss->subclass != US_SC_8070) {
1375                 printf("Sorry, protocol %d not yet supported.\n", ss->subclass);
1376                 return 0;
1377         }
1378         if (ss->ep_int) {
1379                 /* we had found an interrupt endpoint, prepare irq pipe
1380                  * set up the IRQ pipe and handler
1381                  */
1382                 ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255;
1383                 ss->irqpipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int);
1384                 ss->irqmaxp = usb_maxpacket(dev, ss->irqpipe);
1385                 dev->irq_handle = usb_stor_irq;
1386         }
1387         dev->privptr = (void *)ss;
1388         return 1;
1389 }
1390
1391 int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
1392                       struct blk_desc *dev_desc)
1393 {
1394         unsigned char perq, modi;
1395         ALLOC_CACHE_ALIGN_BUFFER(u32, cap, 2);
1396         ALLOC_CACHE_ALIGN_BUFFER(u8, usb_stor_buf, 36);
1397         u32 capacity, blksz;
1398         ccb *pccb = &usb_ccb;
1399
1400         pccb->pdata = usb_stor_buf;
1401
1402         dev_desc->target = dev->devnum;
1403         pccb->lun = dev_desc->lun;
1404         debug(" address %d\n", dev_desc->target);
1405
1406         if (usb_inquiry(pccb, ss)) {
1407                 debug("%s: usb_inquiry() failed\n", __func__);
1408                 return -1;
1409         }
1410
1411         perq = usb_stor_buf[0];
1412         modi = usb_stor_buf[1];
1413
1414         /*
1415          * Skip unknown devices (0x1f) and enclosure service devices (0x0d),
1416          * they would not respond to test_unit_ready .
1417          */
1418         if (((perq & 0x1f) == 0x1f) || ((perq & 0x1f) == 0x0d)) {
1419                 debug("%s: unknown/unsupported device\n", __func__);
1420                 return 0;
1421         }
1422         if ((modi&0x80) == 0x80) {
1423                 /* drive is removable */
1424                 dev_desc->removable = 1;
1425         }
1426         memcpy(dev_desc->vendor, (const void *)&usb_stor_buf[8], 8);
1427         memcpy(dev_desc->product, (const void *)&usb_stor_buf[16], 16);
1428         memcpy(dev_desc->revision, (const void *)&usb_stor_buf[32], 4);
1429         dev_desc->vendor[8] = 0;
1430         dev_desc->product[16] = 0;
1431         dev_desc->revision[4] = 0;
1432 #ifdef CONFIG_USB_BIN_FIXUP
1433         usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor,
1434                       (uchar *)dev_desc->product);
1435 #endif /* CONFIG_USB_BIN_FIXUP */
1436         debug("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
1437               usb_stor_buf[3]);
1438         if (usb_test_unit_ready(pccb, ss)) {
1439                 printf("Device NOT ready\n"
1440                        "   Request Sense returned %02X %02X %02X\n",
1441                        pccb->sense_buf[2], pccb->sense_buf[12],
1442                        pccb->sense_buf[13]);
1443                 if (dev_desc->removable == 1)
1444                         dev_desc->type = perq;
1445                 return 0;
1446         }
1447         pccb->pdata = (unsigned char *)cap;
1448         memset(pccb->pdata, 0, 8);
1449         if (usb_read_capacity(pccb, ss) != 0) {
1450                 printf("READ_CAP ERROR\n");
1451                 cap[0] = 2880;
1452                 cap[1] = 0x200;
1453         }
1454         ss->flags &= ~USB_READY;
1455         debug("Read Capacity returns: 0x%08x, 0x%08x\n", cap[0], cap[1]);
1456 #if 0
1457         if (cap[0] > (0x200000 * 10)) /* greater than 10 GByte */
1458                 cap[0] >>= 16;
1459
1460         cap[0] = cpu_to_be32(cap[0]);
1461         cap[1] = cpu_to_be32(cap[1]);
1462 #endif
1463
1464         capacity = be32_to_cpu(cap[0]) + 1;
1465         blksz = be32_to_cpu(cap[1]);
1466
1467         debug("Capacity = 0x%08x, blocksz = 0x%08x\n", capacity, blksz);
1468         dev_desc->lba = capacity;
1469         dev_desc->blksz = blksz;
1470         dev_desc->log2blksz = LOG2(dev_desc->blksz);
1471         dev_desc->type = perq;
1472         debug(" address %d\n", dev_desc->target);
1473
1474         return 1;
1475 }
1476
1477 #ifdef CONFIG_DM_USB
1478
1479 static int usb_mass_storage_probe(struct udevice *dev)
1480 {
1481         struct usb_device *udev = dev_get_parent_priv(dev);
1482         int ret;
1483
1484         usb_disable_asynch(1); /* asynch transfer not allowed */
1485         ret = usb_stor_probe_device(udev);
1486         usb_disable_asynch(0); /* asynch transfer allowed */
1487
1488         return ret;
1489 }
1490
1491 static const struct udevice_id usb_mass_storage_ids[] = {
1492         { .compatible = "usb-mass-storage" },
1493         { }
1494 };
1495
1496 U_BOOT_DRIVER(usb_mass_storage) = {
1497         .name   = "usb_mass_storage",
1498         .id     = UCLASS_MASS_STORAGE,
1499         .of_match = usb_mass_storage_ids,
1500         .probe = usb_mass_storage_probe,
1501 #ifdef CONFIG_BLK
1502         .platdata_auto_alloc_size       = sizeof(struct us_data),
1503 #endif
1504 };
1505
1506 UCLASS_DRIVER(usb_mass_storage) = {
1507         .id             = UCLASS_MASS_STORAGE,
1508         .name           = "usb_mass_storage",
1509 };
1510
1511 static const struct usb_device_id mass_storage_id_table[] = {
1512         {
1513                 .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
1514                 .bInterfaceClass = USB_CLASS_MASS_STORAGE
1515         },
1516         { }             /* Terminating entry */
1517 };
1518
1519 U_BOOT_USB_DEVICE(usb_mass_storage, mass_storage_id_table);
1520 #endif
1521
1522 #ifdef CONFIG_BLK
1523 static const struct blk_ops usb_storage_ops = {
1524         .read   = usb_stor_read,
1525         .write  = usb_stor_write,
1526 };
1527
1528 U_BOOT_DRIVER(usb_storage_blk) = {
1529         .name           = "usb_storage_blk",
1530         .id             = UCLASS_BLK,
1531         .ops            = &usb_storage_ops,
1532 };
1533 #else
1534 U_BOOT_LEGACY_BLK(usb) = {
1535         .if_typename    = "usb",
1536         .if_type        = IF_TYPE_USB,
1537         .max_devs       = USB_MAX_STOR_DEV,
1538         .desc           = usb_dev_desc,
1539 };
1540 #endif