1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2011 OMICRON electronics GmbH
5 * based on drivers/mtd/nand/raw/nand_spl_load.c
8 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
15 #include <spi_flash.h>
18 #include <asm/global_data.h>
19 #include <dm/ofnode.h>
21 #if CONFIG_IS_ENABLED(OS_BOOT)
23 * Load the kernel, check for a valid header we can parse, and if found load
24 * the kernel and then device tree.
26 static int spi_load_image_os(struct spl_image_info *spl_image,
27 struct spl_boot_device *bootdev,
28 struct spi_flash *flash,
29 struct image_header *header)
33 /* Read for a header, parse or error out. */
34 spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, sizeof(*header),
37 if (image_get_magic(header) != IH_MAGIC)
40 err = spl_parse_image_header(spl_image, bootdev, header);
44 spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
45 spl_image->size, (void *)spl_image->load_addr);
47 /* Read device tree. */
48 spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
49 CONFIG_SYS_SPI_ARGS_SIZE,
50 (void *)CONFIG_SYS_SPL_ARGS_ADDR);
56 static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector,
57 ulong count, void *buf)
59 struct spi_flash *flash = load->dev;
62 ret = spi_flash_read(flash, sector, count, buf);
69 unsigned int __weak spl_spi_get_uboot_offs(struct spi_flash *flash)
71 return CONFIG_SYS_SPI_U_BOOT_OFFS;
74 u32 __weak spl_spi_boot_bus(void)
76 return CONFIG_SF_DEFAULT_BUS;
79 u32 __weak spl_spi_boot_cs(void)
81 return CONFIG_SF_DEFAULT_CS;
85 * The main entry for SPI booting. It's necessary that SDRAM is already
86 * configured and available since this code loads the main U-Boot image
87 * from SPI into SDRAM and starts it from there.
89 static int spl_spi_load_image(struct spl_image_info *spl_image,
90 struct spl_boot_device *bootdev)
93 unsigned int payload_offs;
94 struct spi_flash *flash;
95 struct image_header *header;
96 unsigned int sf_bus = spl_spi_boot_bus();
97 unsigned int sf_cs = spl_spi_boot_cs();
100 * Load U-Boot image from SPI flash into RAM
101 * In DM mode: defaults speed and mode will be
102 * taken from DT when available
104 flash = spi_flash_probe(sf_bus, sf_cs,
105 CONFIG_SF_DEFAULT_SPEED,
106 CONFIG_SF_DEFAULT_MODE);
108 puts("SPI probe failed.\n");
112 payload_offs = spl_spi_get_uboot_offs(flash);
114 header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
116 if (CONFIG_IS_ENABLED(OF_REAL)) {
117 payload_offs = ofnode_conf_read_int("u-boot,spl-payload-offset",
121 #if CONFIG_IS_ENABLED(OS_BOOT)
122 if (spl_start_uboot() || spi_load_image_os(spl_image, bootdev, flash, header))
125 /* Load u-boot, mkimage header is 64 bytes. */
126 err = spi_flash_read(flash, payload_offs, sizeof(*header),
129 debug("%s: Failed to read from SPI flash (err=%d)\n",
134 if (IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL) &&
135 image_get_magic(header) == FDT_MAGIC) {
136 err = spi_flash_read(flash, payload_offs,
137 roundup(fdt_totalsize(header), 4),
138 (void *)CONFIG_SYS_LOAD_ADDR);
141 err = spl_parse_image_header(spl_image, bootdev,
142 (struct image_header *)CONFIG_SYS_LOAD_ADDR);
143 } else if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
144 image_get_magic(header) == FDT_MAGIC) {
145 struct spl_load_info load;
147 debug("Found FIT\n");
150 load.filename = NULL;
152 load.read = spl_spi_fit_read;
153 err = spl_load_simple_fit(spl_image, &load,
156 } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) {
157 struct spl_load_info load;
161 load.filename = NULL;
163 load.read = spl_spi_fit_read;
165 err = spl_load_imx_container(spl_image, &load,
168 err = spl_parse_image_header(spl_image, bootdev, header);
171 err = spi_flash_read(flash, payload_offs + spl_image->offset,
173 (void *)spl_image->load_addr);
175 if (IS_ENABLED(CONFIG_SPI_FLASH_SOFT_RESET)) {
176 err = spi_nor_remove(flash);
184 /* Use priorty 1 so that boards can override this */
185 SPL_LOAD_IMAGE_METHOD("SPI", 1, BOOT_DEVICE_SPI, spl_spi_load_image);