2 * sh.c -- a prototype Bourne shell grammar parser
3 * Intended to follow the original Thompson and Ritchie
4 * "small and simple is beautiful" philosophy, which
5 * incidentally is a good match to today's BusyBox.
7 * Copyright (C) 2000,2001 Larry Doolittle <larry@doolittle.boa.org>
10 * The parser routines proper are all original material, first
11 * written Dec 2000 and Jan 2001 by Larry Doolittle.
12 * The execution engine, the builtins, and much of the underlying
13 * support has been adapted from busybox-0.49pre's lash,
14 * which is Copyright (C) 2000 by Lineo, Inc., and
15 * written by Erik Andersen <andersen@lineo.com>, <andersee@debian.org>.
16 * That, in turn, is based in part on ladsh.c, by Michael K. Johnson and
17 * Erik W. Troan, which they placed in the public domain. I don't know
18 * how much of the Johnson/Troan code has survived the repeated rewrites.
20 * simple_itoa() was lifted from boa-0.93.15
21 * b_addchr() derived from similar w_addchar function in glibc-2.2
22 * setup_redirect(), redirect_opt_num(), and big chunks of main()
23 * and many builtins derived from contributions by Erik Andersen
24 * miscellaneous bugfixes from Matt Kraai
26 * There are two big (and related) architecture differences between
27 * this parser and the lash parser. One is that this version is
28 * actually designed from the ground up to understand nearly all
29 * of the Bourne grammar. The second, consequential change is that
30 * the parser and input reader have been turned inside out. Now,
31 * the parser is in control, and asks for input as needed. The old
32 * way had the input reader in control, and it asked for parsing to
33 * take place as needed. The new way makes it much easier to properly
34 * handle the recursion implicit in the various substitutions, especially
35 * across continuation lines.
37 * Bash grammar not implemented: (how many of these were in original sh?)
38 * $@ (those sure look like weird quoting rules)
40 * ! negation operator for pipes
41 * &> and >& redirection of stdout+stderr
44 * fancy forms of Parameter Expansion
46 * Arithmetic Expansion
47 * <(list) and >(list) Process Substitution
48 * reserved words: case, esac, select, function
49 * Here Documents ( << word )
52 * job handling woefully incomplete and buggy
53 * reserved word execution woefully incomplete and buggy
55 * port selected bugfixes from post-0.49 busybox lash - done?
56 * finish implementing reserved words: for, while, until, do, done
57 * change { and } from special chars to reserved words
58 * builtins: break, continue, eval, return, set, trap, ulimit
60 * handle children going into background
61 * clean up recognition of null pipes
62 * check setting of global_argc and global_argv
63 * control-C handling, probably with longjmp
64 * follow IFS rules more precisely, including update semantics
65 * figure out what to do with backslash-newline
66 * explain why we use signal instead of sigaction
67 * propagate syntax errors, die on resource errors?
68 * continuation lines, both explicit and implicit - done?
69 * memory leak finding and plugging - done?
70 * more testing, especially quoting rules and redirection
71 * document how quoting rules not precisely followed for variable assignments
72 * maybe change map[] to use 2-bit entries
73 * (eventually) remove all the printf's
75 * This program is free software; you can redistribute it and/or modify
76 * it under the terms of the GNU General Public License as published by
77 * the Free Software Foundation; either version 2 of the License, or
78 * (at your option) any later version.
80 * This program is distributed in the hope that it will be useful,
81 * but WITHOUT ANY WARRANTY; without even the implied warranty of
82 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
83 * General Public License for more details.
85 * You should have received a copy of the GNU General Public License
86 * along with this program; if not, write to the Free Software
87 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
91 #include <malloc.h> /* malloc, free, realloc*/
92 #include <linux/ctype.h> /* isalpha, isdigit */
93 #include <common.h> /* readline */
95 #include <command.h> /* find_cmd */
97 extern int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /* do_bootd */
100 #include <ctype.h> /* isalpha, isdigit */
101 #include <unistd.h> /* getpid */
102 #include <stdlib.h> /* getenv, atoi */
103 #include <string.h> /* strchr */
104 #include <stdio.h> /* popen etc. */
105 #include <glob.h> /* glob, of course */
106 #include <stdarg.h> /* va_list */
109 #include <getopt.h> /* should be pretty obvious */
111 #include <sys/stat.h> /* ulimit */
112 #include <sys/types.h>
113 #include <sys/wait.h>
116 /* #include <dmalloc.h> */
122 #define applet_name "hush"
123 #include "standalone.h"
124 #define hush_main main
125 #undef CONFIG_FEATURE_SH_FANCY_PROMPT
129 #define SPECIAL_VAR_SYMBOL 03
131 #define FLAG_EXIT_FROM_LOOP 1
132 #define FLAG_PARSE_SEMICOLON (1 << 1) /* symbol ';' is special for parser */
133 #define FLAG_REPARSING (1 << 2) /* >= 2nd pass */
138 DECLARE_GLOBAL_DATA_PTR;
140 #define EXIT_SUCCESS 0
142 #define syntax() syntax_err()
143 #define xstrdup strdup
144 #define error_msg printf
148 REDIRECT_OVERWRITE = 2,
154 /* The descrip member of this structure is only used to make debugging
156 struct {int mode; int default_fd; char *descrip;} redir_table[] = {
158 { O_RDONLY, 0, "<" },
159 { O_CREAT|O_TRUNC|O_WRONLY, 1, ">" },
160 { O_CREAT|O_APPEND|O_WRONLY, 1, ">>" },
161 { O_RDONLY, -1, "<<" },
173 /* might eventually control execution */
190 #define FLAG_END (1<<RES_NONE)
191 #define FLAG_IF (1<<RES_IF)
192 #define FLAG_THEN (1<<RES_THEN)
193 #define FLAG_ELIF (1<<RES_ELIF)
194 #define FLAG_ELSE (1<<RES_ELSE)
195 #define FLAG_FI (1<<RES_FI)
196 #define FLAG_FOR (1<<RES_FOR)
197 #define FLAG_WHILE (1<<RES_WHILE)
198 #define FLAG_UNTIL (1<<RES_UNTIL)
199 #define FLAG_DO (1<<RES_DO)
200 #define FLAG_DONE (1<<RES_DONE)
201 #define FLAG_IN (1<<RES_IN)
202 #define FLAG_START (1<<RES_XXXX)
204 /* This holds pointers to the various results of parsing */
206 struct child_prog *child;
207 struct pipe *list_head;
210 struct redir_struct *pending_redirect;
213 int old_flag; /* for figuring out valid reserved words */
214 struct p_context *stack;
215 int type; /* define type of parser : ";$" common or special symbol */
216 /* How about quoting status? */
220 struct redir_struct {
221 redir_type type; /* type of redirection */
222 int fd; /* file descriptor being redirected */
223 int dup; /* -1, or file descriptor being duplicated */
224 struct redir_struct *next; /* pointer to the next redirect in the list */
225 glob_t word; /* *word.gl_pathv is the filename */
231 pid_t pid; /* 0 if exited */
233 char **argv; /* program name and arguments */
235 int argc; /* number of program arguments */
237 struct pipe *group; /* if non-NULL, first in group or subshell */
239 int subshell; /* flag, non-zero if group must be forked */
240 struct redir_struct *redirects; /* I/O redirections */
241 glob_t glob_result; /* result of parameter globbing */
242 int is_stopped; /* is the program currently running? */
243 struct pipe *family; /* pointer back to the child's parent pipe */
245 int sp; /* number of SPECIAL_VAR_SYMBOL */
251 int jobid; /* job number */
253 int num_progs; /* total number of programs in job */
255 int running_progs; /* number of programs running */
256 char *text; /* name of job */
257 char *cmdbuf; /* buffer various argv's point into */
258 pid_t pgrp; /* process group ID for the job */
260 struct child_prog *progs; /* array of commands in pipe */
261 struct pipe *next; /* to track background commands */
263 int stopped_progs; /* number of programs alive, but stopped */
264 int job_context; /* bitmask defining current context */
266 pipe_style followup; /* PIPE_BG, PIPE_SEQ, PIPE_OR, PIPE_AND */
267 reserved_style r_mode; /* supports if, for, while, until */
273 struct close_me *next;
282 struct variables *next;
285 /* globals, connect us to the outside world
286 * the first three support $?, $#, and $1 */
289 unsigned int global_argc;
291 unsigned int last_return_code;
294 extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */
297 /* "globals" within this file */
299 static char map[256];
301 static int fake_mode;
302 static int interactive;
303 static struct close_me *close_me_head;
304 static const char *cwd;
305 static struct pipe *job_list;
306 static unsigned int last_bg_pid;
307 static unsigned int last_jobid;
308 static unsigned int shell_terminal;
311 struct variables shell_ver = { "HUSH_VERSION", "0.01", 1, 1, 0 };
312 struct variables *top_vars = &shell_ver;
314 static int flag_repeat = 0;
315 static int do_repeat = 0;
316 static struct variables *top_vars = NULL ;
317 #endif /*__U_BOOT__ */
319 #define B_CHUNK (100)
329 #define NULL_O_STRING {NULL,0,0,0,0}
330 /* used for initialization:
331 o_string foo = NULL_O_STRING; */
333 /* I can almost use ordinary FILE *. Is open_memstream() universally
334 * available? Where is it documented? */
345 int (*get) (struct in_str *);
346 int (*peek) (struct in_str *);
348 #define b_getch(input) ((input)->get(input))
349 #define b_peek(input) ((input)->peek(input))
352 #define JOB_STATUS_FORMAT "[%d] %-22s %.40s\n"
354 struct built_in_command {
355 char *cmd; /* name */
356 char *descr; /* description */
357 int (*function) (struct child_prog *); /* function ptr */
361 /* define DEBUG_SHELL for debugging output (obviously ;-)) */
366 /* This should be in utility.c */
369 static void debug_printf(const char *format, ...)
372 va_start(args, format);
373 vfprintf(stderr, format, args);
377 #define debug_printf(fmt,args...) printf (fmt ,##args)
380 static inline void debug_printf(const char *format, ...) { }
382 #define final_printf debug_printf
385 static void syntax_err(void) {
386 printf("syntax error\n");
389 static void __syntax(char *file, int line) {
390 error_msg("syntax error %s:%d", file, line);
392 #define syntax() __syntax(__FILE__, __LINE__)
396 static void *xmalloc(size_t size);
397 static void *xrealloc(void *ptr, size_t size);
399 /* Index of subroutines: */
400 /* function prototypes for builtins */
401 static int builtin_cd(struct child_prog *child);
402 static int builtin_env(struct child_prog *child);
403 static int builtin_eval(struct child_prog *child);
404 static int builtin_exec(struct child_prog *child);
405 static int builtin_exit(struct child_prog *child);
406 static int builtin_export(struct child_prog *child);
407 static int builtin_fg_bg(struct child_prog *child);
408 static int builtin_help(struct child_prog *child);
409 static int builtin_jobs(struct child_prog *child);
410 static int builtin_pwd(struct child_prog *child);
411 static int builtin_read(struct child_prog *child);
412 static int builtin_set(struct child_prog *child);
413 static int builtin_shift(struct child_prog *child);
414 static int builtin_source(struct child_prog *child);
415 static int builtin_umask(struct child_prog *child);
416 static int builtin_unset(struct child_prog *child);
417 static int builtin_not_written(struct child_prog *child);
419 /* o_string manipulation: */
420 static int b_check_space(o_string *o, int len);
421 static int b_addchr(o_string *o, int ch);
422 static void b_reset(o_string *o);
423 static int b_addqchr(o_string *o, int ch, int quote);
425 static int b_adduint(o_string *o, unsigned int i);
427 /* in_str manipulations: */
428 static int static_get(struct in_str *i);
429 static int static_peek(struct in_str *i);
430 static int file_get(struct in_str *i);
431 static int file_peek(struct in_str *i);
433 static void setup_file_in_str(struct in_str *i, FILE *f);
435 static void setup_file_in_str(struct in_str *i);
437 static void setup_string_in_str(struct in_str *i, const char *s);
439 /* close_me manipulations: */
440 static void mark_open(int fd);
441 static void mark_closed(int fd);
442 static void close_all(void);
444 /* "run" the final data structures: */
445 static char *indenter(int i);
446 static int free_pipe_list(struct pipe *head, int indent);
447 static int free_pipe(struct pipe *pi, int indent);
448 /* really run the final data structures: */
450 static int setup_redirects(struct child_prog *prog, int squirrel[]);
452 static int run_list_real(struct pipe *pi);
454 static void pseudo_exec(struct child_prog *child) __attribute__ ((noreturn));
456 static int run_pipe_real(struct pipe *pi);
457 /* extended glob support: */
459 static int globhack(const char *src, int flags, glob_t *pglob);
460 static int glob_needed(const char *s);
461 static int xglob(o_string *dest, int flags, glob_t *pglob);
463 /* variable assignment: */
464 static int is_assignment(const char *s);
465 /* data structure manipulation: */
467 static int setup_redirect(struct p_context *ctx, int fd, redir_type style, struct in_str *input);
469 static void initialize_context(struct p_context *ctx);
470 static int done_word(o_string *dest, struct p_context *ctx);
471 static int done_command(struct p_context *ctx);
472 static int done_pipe(struct p_context *ctx, pipe_style type);
473 /* primary string parsing: */
475 static int redirect_dup_num(struct in_str *input);
476 static int redirect_opt_num(o_string *o);
477 static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end);
478 static int parse_group(o_string *dest, struct p_context *ctx, struct in_str *input, int ch);
480 static char *lookup_param(char *src);
481 static char *make_string(char **inp);
482 static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input);
484 static int parse_string(o_string *dest, struct p_context *ctx, const char *src);
486 static int parse_stream(o_string *dest, struct p_context *ctx, struct in_str *input0, int end_trigger);
488 static int parse_stream_outer(struct in_str *inp, int flag);
490 static int parse_string_outer(const char *s, int flag);
491 static int parse_file_outer(FILE *f);
494 /* job management: */
495 static int checkjobs(struct pipe* fg_pipe);
496 static void insert_bg_job(struct pipe *pi);
497 static void remove_bg_job(struct pipe *pi);
499 /* local variable support */
500 static char **make_list_in(char **inp, char *name);
501 static char *insert_var_value(char *inp);
502 static char *get_local_var(const char *var);
505 /* Table of built-in functions. They can be forked or not, depending on
506 * context: within pipes, they fork. As simple commands, they do not.
507 * When used in non-forking context, they can change global variables
508 * in the parent shell process. If forked, of course they can not.
509 * For example, 'unset foo | whatever' will parse and run, but foo will
510 * still be set at the end. */
511 static struct built_in_command bltins[] = {
512 {"bg", "Resume a job in the background", builtin_fg_bg},
513 {"break", "Exit for, while or until loop", builtin_not_written},
514 {"cd", "Change working directory", builtin_cd},
515 {"continue", "Continue for, while or until loop", builtin_not_written},
516 {"env", "Print all environment variables", builtin_env},
517 {"eval", "Construct and run shell command", builtin_eval},
518 {"exec", "Exec command, replacing this shell with the exec'd process",
520 {"exit", "Exit from shell()", builtin_exit},
521 {"export", "Set environment variable", builtin_export},
522 {"fg", "Bring job into the foreground", builtin_fg_bg},
523 {"jobs", "Lists the active jobs", builtin_jobs},
524 {"pwd", "Print current directory", builtin_pwd},
525 {"read", "Input environment variable", builtin_read},
526 {"return", "Return from a function", builtin_not_written},
527 {"set", "Set/unset shell local variables", builtin_set},
528 {"shift", "Shift positional parameters", builtin_shift},
529 {"trap", "Trap signals", builtin_not_written},
530 {"ulimit","Controls resource limits", builtin_not_written},
531 {"umask","Sets file creation mask", builtin_umask},
532 {"unset", "Unset environment variable", builtin_unset},
533 {".", "Source-in and run commands in a file", builtin_source},
534 {"help", "List shell built-in commands", builtin_help},
538 static const char *set_cwd(void)
541 cwd = NULL; /* xgetcwd(arg) called free(arg) */
542 cwd = xgetcwd((char *)cwd);
548 /* built-in 'eval' handler */
549 static int builtin_eval(struct child_prog *child)
552 int rcode = EXIT_SUCCESS;
554 if (child->argv[1]) {
555 str = make_string(child->argv + 1);
556 parse_string_outer(str, FLAG_EXIT_FROM_LOOP |
557 FLAG_PARSE_SEMICOLON);
559 rcode = last_return_code;
564 /* built-in 'cd <path>' handler */
565 static int builtin_cd(struct child_prog *child)
568 if (child->argv[1] == NULL)
569 newdir = getenv("HOME");
571 newdir = child->argv[1];
573 printf("cd: %s: %s\n", newdir, strerror(errno));
580 /* built-in 'env' handler */
581 static int builtin_env(struct child_prog *dummy)
584 if (e == NULL) return EXIT_FAILURE;
591 /* built-in 'exec' handler */
592 static int builtin_exec(struct child_prog *child)
594 if (child->argv[1] == NULL)
595 return EXIT_SUCCESS; /* Really? */
601 /* built-in 'exit' handler */
602 static int builtin_exit(struct child_prog *child)
604 if (child->argv[1] == NULL)
605 exit(last_return_code);
606 exit (atoi(child->argv[1]));
609 /* built-in 'export VAR=value' handler */
610 static int builtin_export(struct child_prog *child)
613 char *name = child->argv[1];
616 return (builtin_env(child));
622 char *value = strchr(name, '=');
626 /* They are exporting something without an =VALUE */
628 value = get_local_var(name);
630 size_t ln = strlen(name);
632 tmp = realloc(name, ln+strlen(value)+2);
636 sprintf(tmp+ln, "=%s", value);
640 /* bash does not return an error when trying to export
641 * an undefined variable. Do likewise. */
647 perror_msg("export");
649 res = set_local_var(name, 1);
656 /* built-in 'fg' and 'bg' handler */
657 static int builtin_fg_bg(struct child_prog *child)
660 struct pipe *pi=NULL;
664 /* If they gave us no args, assume they want the last backgrounded task */
665 if (!child->argv[1]) {
666 for (pi = job_list; pi; pi = pi->next) {
667 if (pi->jobid == last_jobid) {
672 error_msg("%s: no current job", child->argv[0]);
676 if (sscanf(child->argv[1], "%%%d", &jobnum) != 1) {
677 error_msg("%s: bad argument '%s'", child->argv[0], child->argv[1]);
680 for (pi = job_list; pi; pi = pi->next) {
681 if (pi->jobid == jobnum) {
686 error_msg("%s: %d: no such job", child->argv[0], jobnum);
691 if (*child->argv[0] == 'f') {
692 /* Put the job into the foreground. */
693 tcsetpgrp(shell_terminal, pi->pgrp);
696 /* Restart the processes in the job */
697 for (i = 0; i < pi->num_progs; i++)
698 pi->progs[i].is_stopped = 0;
700 if ( (i=kill(- pi->pgrp, SIGCONT)) < 0) {
704 perror_msg("kill (SIGCONT)");
708 pi->stopped_progs = 0;
712 /* built-in 'help' handler */
713 static int builtin_help(struct child_prog *dummy)
715 struct built_in_command *x;
717 printf("\nBuilt-in commands:\n");
718 printf("-------------------\n");
719 for (x = bltins; x->cmd; x++) {
722 printf("%s\t%s\n", x->cmd, x->descr);
728 /* built-in 'jobs' handler */
729 static int builtin_jobs(struct child_prog *child)
734 for (job = job_list; job; job = job->next) {
735 if (job->running_progs == job->stopped_progs)
736 status_string = "Stopped";
738 status_string = "Running";
740 printf(JOB_STATUS_FORMAT, job->jobid, status_string, job->text);
746 /* built-in 'pwd' handler */
747 static int builtin_pwd(struct child_prog *dummy)
753 /* built-in 'read VAR' handler */
754 static int builtin_read(struct child_prog *child)
758 if (child->argv[1]) {
762 string[0] = 0; /* In case stdin has only EOF */
764 fgets(string, sizeof(string), stdin);
766 var = malloc(strlen(child->argv[1])+strlen(string)+2);
768 sprintf(var, "%s=%s", child->argv[1], string);
769 res = set_local_var(var, 0);
773 fprintf(stderr, "read: %m\n");
774 free(var); /* So not move up to avoid breaking errno */
777 do res=getchar(); while(res!='\n' && res!=EOF);
782 /* built-in 'set VAR=value' handler */
783 static int builtin_set(struct child_prog *child)
785 char *temp = child->argv[1];
789 for(e = top_vars; e; e=e->next)
790 printf("%s=%s\n", e->name, e->value);
792 set_local_var(temp, 0);
798 /* Built-in 'shift' handler */
799 static int builtin_shift(struct child_prog *child)
802 if (child->argv[1]) {
803 n=atoi(child->argv[1]);
805 if (n>=0 && n<global_argc) {
806 /* XXX This probably breaks $0 */
815 /* Built-in '.' handler (read-in and execute commands from file) */
816 static int builtin_source(struct child_prog *child)
821 if (child->argv[1] == NULL)
824 /* XXX search through $PATH is missing */
825 input = fopen(child->argv[1], "r");
827 error_msg("Couldn't open file '%s'", child->argv[1]);
831 /* Now run the file */
832 /* XXX argv and argc are broken; need to save old global_argv
833 * (pointer only is OK!) on this stack frame,
834 * set global_argv=child->argv+1, recurse, and restore. */
835 mark_open(fileno(input));
836 status = parse_file_outer(input);
837 mark_closed(fileno(input));
842 static int builtin_umask(struct child_prog *child)
845 const char *arg = child->argv[1];
848 new_umask=strtoul(arg, &end, 8);
849 if (*end!='\0' || end == arg) {
853 printf("%.3o\n", (unsigned int) (new_umask=umask(0)));
859 /* built-in 'unset VAR' handler */
860 static int builtin_unset(struct child_prog *child)
862 /* bash returned already true */
863 unset_local_var(child->argv[1]);
867 static int builtin_not_written(struct child_prog *child)
869 printf("builtin_%s not written\n",child->argv[0]);
874 static int b_check_space(o_string *o, int len)
876 /* It would be easy to drop a more restrictive policy
877 * in here, such as setting a maximum string length */
878 if (o->length + len > o->maxlen) {
879 char *old_data = o->data;
880 /* assert (data == NULL || o->maxlen != 0); */
881 o->maxlen += max(2*len, B_CHUNK);
882 o->data = realloc(o->data, 1 + o->maxlen);
883 if (o->data == NULL) {
887 return o->data == NULL;
890 static int b_addchr(o_string *o, int ch)
892 debug_printf("b_addchr: %c %d %p\n", ch, o->length, o);
893 if (b_check_space(o, 1)) return B_NOSPAC;
894 o->data[o->length] = ch;
896 o->data[o->length] = '\0';
900 static void b_reset(o_string *o)
904 if (o->data != NULL) *o->data = '\0';
907 static void b_free(o_string *o)
915 /* My analysis of quoting semantics tells me that state information
916 * is associated with a destination, not a source.
918 static int b_addqchr(o_string *o, int ch, int quote)
920 if (quote && strchr("*?[\\",ch)) {
922 rc = b_addchr(o, '\\');
925 return b_addchr(o, ch);
928 /* belongs in utility.c */
929 char *simple_itoa(unsigned int i)
931 /* 21 digits plus null terminator, good for 64-bit or smaller ints */
932 static char local[22];
933 char *p = &local[21];
943 static int b_adduint(o_string *o, unsigned int i)
946 char *p = simple_itoa(i);
947 /* no escape checking necessary */
948 do r=b_addchr(o, *p++); while (r==0 && *p);
953 static int static_get(struct in_str *i)
956 if (ch=='\0') return EOF;
960 static int static_peek(struct in_str *i)
966 static inline void cmdedit_set_initial_prompt(void)
968 #ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
977 static inline void setup_prompt_string(int promptmode, char **prompt_str)
979 debug_printf("setup_prompt_string %d ",promptmode);
980 #ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
981 /* Set up the prompt */
982 if (promptmode == 1) {
984 PS1=xmalloc(strlen(cwd)+4);
985 sprintf(PS1, "%s %s", cwd, ( geteuid() != 0 ) ? "$ ":"# ");
991 *prompt_str = (promptmode==1)? PS1 : PS2;
993 debug_printf("result %s\n",*prompt_str);
997 static void get_user_input(struct in_str *i)
1001 static char the_command[BUFSIZ];
1003 setup_prompt_string(i->promptmode, &prompt_str);
1004 #ifdef CONFIG_FEATURE_COMMAND_EDITING
1006 ** enable command line editing only while a command line
1007 ** is actually being read; otherwise, we'll end up bequeathing
1008 ** atexit() handlers and other unwanted stuff to our
1009 ** child processes (rob@sysgo.de)
1011 cmdedit_read_input(prompt_str, the_command);
1013 fputs(prompt_str, stdout);
1015 the_command[0]=fgetc(i->file);
1016 the_command[1]='\0';
1021 extern char console_buffer[CONFIG_SYS_CBSIZE];
1023 static char the_command[CONFIG_SYS_CBSIZE];
1025 #ifdef CONFIG_BOOT_RETRY_TIME
1026 # ifdef CONFIG_RESET_TO_RETRY
1027 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
1029 # error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
1031 reset_cmd_timeout();
1034 if (i->promptmode == 1) {
1035 n = readline(CONFIG_SYS_PROMPT);
1037 n = readline(CONFIG_SYS_PROMPT_HUSH_PS2);
1039 #ifdef CONFIG_BOOT_RETRY_TIME
1041 puts("\nTimeout waiting for command\n");
1042 # ifdef CONFIG_RESET_TO_RETRY
1043 do_reset(NULL, 0, 0, NULL);
1045 # error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
1053 n = strlen(console_buffer);
1054 console_buffer[n] = '\n';
1055 console_buffer[n+1]= '\0';
1056 if (had_ctrlc()) flag_repeat = 0;
1059 if (i->promptmode == 1) {
1060 if (console_buffer[0] == '\n'&& flag_repeat == 0) {
1061 strcpy(the_command,console_buffer);
1064 if (console_buffer[0] != '\n') {
1065 strcpy(the_command,console_buffer);
1075 if (console_buffer[0] != '\n') {
1076 if (strlen(the_command) + strlen(console_buffer)
1077 < CONFIG_SYS_CBSIZE) {
1078 n = strlen(the_command);
1079 the_command[n-1] = ' ';
1080 strcpy(&the_command[n],console_buffer);
1083 the_command[0] = '\n';
1084 the_command[1] = '\0';
1088 if (i->__promptme == 0) {
1089 the_command[0] = '\n';
1090 the_command[1] = '\0';
1092 i->p = console_buffer;
1097 /* This is the magic location that prints prompts
1098 * and gets data back from the user */
1099 static int file_get(struct in_str *i)
1104 /* If there is data waiting, eat it up */
1105 if (i->p && *i->p) {
1108 /* need to double check i->file because we might be doing something
1109 * more complicated by now, like sourcing or substituting. */
1111 if (i->__promptme && interactive && i->file == stdin) {
1112 while(! i->p || (interactive && strlen(i->p)==0) ) {
1114 while(! i->p || strlen(i->p)==0 ) {
1122 if (i->p && *i->p) {
1127 ch = fgetc(i->file);
1131 debug_printf("b_getch: got a %d\n", ch);
1134 if (ch == '\n') i->__promptme=1;
1139 /* All the callers guarantee this routine will never be
1140 * used right after a newline, so prompting is not needed.
1142 static int file_peek(struct in_str *i)
1145 if (i->p && *i->p) {
1150 i->peek_buf[0] = fgetc(i->file);
1151 i->peek_buf[1] = '\0';
1153 debug_printf("b_peek: got a %d\n", *i->p);
1160 static void setup_file_in_str(struct in_str *i, FILE *f)
1162 static void setup_file_in_str(struct in_str *i)
1165 i->peek = file_peek;
1175 static void setup_string_in_str(struct in_str *i, const char *s)
1177 i->peek = static_peek;
1178 i->get = static_get;
1185 static void mark_open(int fd)
1187 struct close_me *new = xmalloc(sizeof(struct close_me));
1189 new->next = close_me_head;
1190 close_me_head = new;
1193 static void mark_closed(int fd)
1195 struct close_me *tmp;
1196 if (close_me_head == NULL || close_me_head->fd != fd)
1197 error_msg_and_die("corrupt close_me");
1198 tmp = close_me_head;
1199 close_me_head = close_me_head->next;
1203 static void close_all(void)
1206 for (c=close_me_head; c; c=c->next) {
1209 close_me_head = NULL;
1212 /* squirrel != NULL means we squirrel away copies of stdin, stdout,
1213 * and stderr if they are redirected. */
1214 static int setup_redirects(struct child_prog *prog, int squirrel[])
1217 struct redir_struct *redir;
1219 for (redir=prog->redirects; redir; redir=redir->next) {
1220 if (redir->dup == -1 && redir->word.gl_pathv == NULL) {
1221 /* something went wrong in the parse. Pretend it didn't happen */
1224 if (redir->dup == -1) {
1225 mode=redir_table[redir->type].mode;
1226 openfd = open(redir->word.gl_pathv[0], mode, 0666);
1228 /* this could get lost if stderr has been redirected, but
1229 bash and ash both lose it as well (though zsh doesn't!) */
1230 perror_msg("error opening %s", redir->word.gl_pathv[0]);
1234 openfd = redir->dup;
1237 if (openfd != redir->fd) {
1238 if (squirrel && redir->fd < 3) {
1239 squirrel[redir->fd] = dup(redir->fd);
1244 dup2(openfd, redir->fd);
1245 if (redir->dup == -1)
1253 static void restore_redirects(int squirrel[])
1256 for (i=0; i<3; i++) {
1259 /* No error checking. I sure wouldn't know what
1260 * to do with an error if I found one! */
1268 /* XXX no exit() here. If you don't exec, use _exit instead.
1269 * The at_exit handlers apparently confuse the calling process,
1270 * in particular stdin handling. Not sure why? */
1271 static void pseudo_exec(struct child_prog *child)
1275 struct built_in_command *x;
1277 for (i=0; is_assignment(child->argv[i]); i++) {
1278 debug_printf("pid %d environment modification: %s\n",getpid(),child->argv[i]);
1279 p = insert_var_value(child->argv[i]);
1281 if (p != child->argv[i]) free(p);
1283 child->argv+=i; /* XXX this hack isn't so horrible, since we are about
1284 to exit, and therefore don't need to keep data
1285 structures consistent for free() use. */
1286 /* If a variable is assigned in a forest, and nobody listens,
1287 * was it ever really set?
1289 if (child->argv[0] == NULL) {
1290 _exit(EXIT_SUCCESS);
1294 * Check if the command matches any of the builtins.
1295 * Depending on context, this might be redundant. But it's
1296 * easier to waste a few CPU cycles than it is to figure out
1297 * if this is one of those cases.
1299 for (x = bltins; x->cmd; x++) {
1300 if (strcmp(child->argv[0], x->cmd) == 0 ) {
1301 debug_printf("builtin exec %s\n", child->argv[0]);
1302 rcode = x->function(child);
1308 /* Check if the command matches any busybox internal commands
1310 * FIXME: This feature is not 100% safe, since
1311 * BusyBox is not fully reentrant, so we have no guarantee the things
1312 * from the .bss are still zeroed, or that things from .data are still
1313 * at their defaults. We could exec ourself from /proc/self/exe, but I
1314 * really dislike relying on /proc for things. We could exec ourself
1315 * from global_argv[0], but if we are in a chroot, we may not be able
1316 * to find ourself... */
1317 #ifdef CONFIG_FEATURE_SH_STANDALONE_SHELL
1320 char** argv_l=child->argv;
1321 char *name = child->argv[0];
1323 #ifdef CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN
1324 /* Following discussions from November 2000 on the busybox mailing
1325 * list, the default configuration, (without
1326 * get_last_path_component()) lets the user force use of an
1327 * external command by specifying the full (with slashes) filename.
1328 * If you enable CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN then applets
1329 * _aways_ override external commands, so if you want to run
1330 * /bin/cat, it will use BusyBox cat even if /bin/cat exists on the
1331 * filesystem and is _not_ busybox. Some systems may want this,
1333 name = get_last_path_component(name);
1335 /* Count argc for use in a second... */
1336 for(argc_l=0;*argv_l!=NULL; argv_l++, argc_l++);
1338 debug_printf("running applet %s\n", name);
1339 run_applet_by_name(name, argc_l, child->argv);
1342 debug_printf("exec of %s\n",child->argv[0]);
1343 execvp(child->argv[0],child->argv);
1344 perror_msg("couldn't exec: %s",child->argv[0]);
1346 } else if (child->group) {
1347 debug_printf("runtime nesting to group\n");
1348 interactive=0; /* crucial!!!! */
1349 rcode = run_list_real(child->group);
1350 /* OK to leak memory by not calling free_pipe_list,
1351 * since this process is about to exit */
1354 /* Can happen. See what bash does with ">foo" by itself. */
1355 debug_printf("trying to pseudo_exec null command\n");
1356 _exit(EXIT_SUCCESS);
1360 static void insert_bg_job(struct pipe *pi)
1362 struct pipe *thejob;
1364 /* Linear search for the ID of the job to use */
1366 for (thejob = job_list; thejob; thejob = thejob->next)
1367 if (thejob->jobid >= pi->jobid)
1368 pi->jobid = thejob->jobid + 1;
1370 /* add thejob to the list of running jobs */
1372 thejob = job_list = xmalloc(sizeof(*thejob));
1374 for (thejob = job_list; thejob->next; thejob = thejob->next) /* nothing */;
1375 thejob->next = xmalloc(sizeof(*thejob));
1376 thejob = thejob->next;
1379 /* physically copy the struct job */
1380 memcpy(thejob, pi, sizeof(struct pipe));
1381 thejob->next = NULL;
1382 thejob->running_progs = thejob->num_progs;
1383 thejob->stopped_progs = 0;
1384 thejob->text = xmalloc(BUFSIZ); /* cmdedit buffer size */
1386 /*if (pi->progs[0] && pi->progs[0].argv && pi->progs[0].argv[0]) */
1388 char *bar=thejob->text;
1389 char **foo=pi->progs[0].argv;
1390 while(foo && *foo) {
1391 bar += sprintf(bar, "%s ", *foo++);
1395 /* we don't wait for background thejobs to return -- append it
1396 to the list of backgrounded thejobs and leave it alone */
1397 printf("[%d] %d\n", thejob->jobid, thejob->progs[0].pid);
1398 last_bg_pid = thejob->progs[0].pid;
1399 last_jobid = thejob->jobid;
1402 /* remove a backgrounded job */
1403 static void remove_bg_job(struct pipe *pi)
1405 struct pipe *prev_pipe;
1407 if (pi == job_list) {
1408 job_list = pi->next;
1410 prev_pipe = job_list;
1411 while (prev_pipe->next != pi)
1412 prev_pipe = prev_pipe->next;
1413 prev_pipe->next = pi->next;
1416 last_jobid = job_list->jobid;
1420 pi->stopped_progs = 0;
1425 /* Checks to see if any processes have exited -- if they
1426 have, figure out why and see if a job has completed */
1427 static int checkjobs(struct pipe* fg_pipe)
1435 attributes = WUNTRACED;
1436 if (fg_pipe==NULL) {
1437 attributes |= WNOHANG;
1440 while ((childpid = waitpid(-1, &status, attributes)) > 0) {
1443 for (i=0; i < fg_pipe->num_progs; i++) {
1444 if (fg_pipe->progs[i].pid == childpid) {
1445 if (i==fg_pipe->num_progs-1)
1446 rcode=WEXITSTATUS(status);
1447 (fg_pipe->num_progs)--;
1453 for (pi = job_list; pi; pi = pi->next) {
1455 while (prognum < pi->num_progs && pi->progs[prognum].pid != childpid) {
1458 if (prognum < pi->num_progs)
1463 debug_printf("checkjobs: pid %d was not in our list!\n", childpid);
1467 if (WIFEXITED(status) || WIFSIGNALED(status)) {
1469 pi->running_progs--;
1470 pi->progs[prognum].pid = 0;
1472 if (!pi->running_progs) {
1473 printf(JOB_STATUS_FORMAT, pi->jobid, "Done", pi->text);
1478 pi->stopped_progs++;
1479 pi->progs[prognum].is_stopped = 1;
1482 /* Printing this stuff is a pain, since it tends to
1483 * overwrite the prompt an inconveinient moments. So
1485 if (pi->stopped_progs == pi->num_progs) {
1486 printf("\n"JOB_STATUS_FORMAT, pi->jobid, "Stopped", pi->text);
1492 if (childpid == -1 && errno != ECHILD)
1493 perror_msg("waitpid");
1495 /* move the shell to the foreground */
1496 /*if (interactive && tcsetpgrp(shell_terminal, getpgid(0))) */
1497 /* perror_msg("tcsetpgrp-2"); */
1501 /* Figure out our controlling tty, checking in order stderr,
1502 * stdin, and stdout. If check_pgrp is set, also check that
1503 * we belong to the foreground process group associated with
1504 * that tty. The value of shell_terminal is needed in order to call
1505 * tcsetpgrp(shell_terminal, ...); */
1506 void controlling_tty(int check_pgrp)
1510 if ((curpgrp = tcgetpgrp(shell_terminal = 2)) < 0
1511 && (curpgrp = tcgetpgrp(shell_terminal = 0)) < 0
1512 && (curpgrp = tcgetpgrp(shell_terminal = 1)) < 0)
1513 goto shell_terminal_error;
1515 if (check_pgrp && curpgrp != getpgid(0))
1516 goto shell_terminal_error;
1520 shell_terminal_error:
1521 shell_terminal = -1;
1526 /* run_pipe_real() starts all the jobs, but doesn't wait for anything
1527 * to finish. See checkjobs().
1529 * return code is normally -1, when the caller has to wait for children
1530 * to finish to determine the exit status of the pipe. If the pipe
1531 * is a simple builtin command, however, the action is done by the
1532 * time run_pipe_real returns, and the exit code is provided as the
1535 * The input of the pipe is always stdin, the output is always
1536 * stdout. The outpipe[] mechanism in BusyBox-0.48 lash is bogus,
1537 * because it tries to avoid running the command substitution in
1538 * subshell, when that is in fact necessary. The subshell process
1539 * now has its stdout directed to the input of the appropriate pipe,
1540 * so this routine is noticeably simpler.
1542 static int run_pipe_real(struct pipe *pi)
1546 int nextin, nextout;
1547 int pipefds[2]; /* pipefds[0] is for reading */
1548 struct child_prog *child;
1549 struct built_in_command *x;
1552 /* Avoid longjmp clobbering */
1560 int flag = do_repeat ? CMD_FLAG_REPEAT : 0;
1561 struct child_prog *child;
1565 /* Avoid longjmp clobbering */
1570 #endif /* __U_BOOT__ */
1577 /* Check if this is a simple builtin (not part of a pipe).
1578 * Builtins within pipes have to fork anyway, and are handled in
1579 * pseudo_exec. "echo foo | read bar" doesn't work on bash, either.
1581 if (pi->num_progs == 1) child = & (pi->progs[0]);
1583 if (pi->num_progs == 1 && child->group && child->subshell == 0) {
1584 int squirrel[] = {-1, -1, -1};
1586 debug_printf("non-subshell grouping\n");
1587 setup_redirects(child, squirrel);
1588 /* XXX could we merge code with following builtin case,
1589 * by creating a pseudo builtin that calls run_list_real? */
1590 rcode = run_list_real(child->group);
1591 restore_redirects(squirrel);
1593 if (pi->num_progs == 1 && child->group) {
1595 debug_printf("non-subshell grouping\n");
1596 rcode = run_list_real(child->group);
1599 } else if (pi->num_progs == 1 && pi->progs[0].argv != NULL) {
1600 for (i=0; is_assignment(child->argv[i]); i++) { /* nothing */ }
1601 if (i!=0 && child->argv[i]==NULL) {
1602 /* assignments, but no command: set the local environment */
1603 for (i=0; child->argv[i]!=NULL; i++) {
1605 /* Ok, this case is tricky. We have to decide if this is a
1606 * local variable, or an already exported variable. If it is
1607 * already exported, we have to export the new value. If it is
1608 * not exported, we need only set this as a local variable.
1609 * This junk is all to decide whether or not to export this
1613 name = xstrdup(child->argv[i]);
1614 debug_printf("Local environment set: %s\n", name);
1615 value = strchr(name, '=');
1619 if ( get_local_var(name)) {
1624 p = insert_var_value(child->argv[i]);
1625 set_local_var(p, export_me);
1626 if (p != child->argv[i]) free(p);
1628 return EXIT_SUCCESS; /* don't worry about errors in set_local_var() yet */
1630 for (i = 0; is_assignment(child->argv[i]); i++) {
1631 p = insert_var_value(child->argv[i]);
1635 set_local_var(p, 0);
1637 if (p != child->argv[i]) {
1645 str = make_string((child->argv + i));
1646 parse_string_outer(str, FLAG_EXIT_FROM_LOOP | FLAG_REPARSING);
1648 return last_return_code;
1651 for (x = bltins; x->cmd; x++) {
1652 if (strcmp(child->argv[i], x->cmd) == 0 ) {
1653 int squirrel[] = {-1, -1, -1};
1655 if (x->function == builtin_exec && child->argv[i+1]==NULL) {
1656 debug_printf("magic exec\n");
1657 setup_redirects(child,NULL);
1658 return EXIT_SUCCESS;
1660 debug_printf("builtin inline %s\n", child->argv[0]);
1661 /* XXX setup_redirects acts on file descriptors, not FILEs.
1662 * This is perfect for work that comes after exec().
1663 * Is it really safe for inline use? Experimentally,
1664 * things seem to work with glibc. */
1665 setup_redirects(child, squirrel);
1667 /* check ";", because ,example , argv consist from
1668 * "help;flinfo" must not execute
1670 if (strchr(child->argv[i], ';')) {
1671 printf ("Unknown command '%s' - try 'help' or use 'run' command\n",
1675 /* Look up command in command table */
1678 if ((cmdtp = find_cmd(child->argv[i])) == NULL) {
1679 printf ("Unknown command '%s' - try 'help'\n", child->argv[i]);
1680 return -1; /* give up after bad command */
1683 #if defined(CONFIG_CMD_BOOTD)
1684 extern int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
1686 /* avoid "bootd" recursion */
1687 if (cmdtp->cmd == do_bootd) {
1688 if (flag & CMD_FLAG_BOOTD) {
1689 printf ("'bootd' recursion detected\n");
1693 flag |= CMD_FLAG_BOOTD;
1696 /* found - check max args */
1697 if ((child->argc - i) > cmdtp->maxargs) {
1702 child->argv+=i; /* XXX horrible hack */
1704 rcode = x->function(child);
1706 /* OK - call function to do the command */
1708 rcode = (cmdtp->cmd)
1709 (cmdtp, flag,child->argc-i,&child->argv[i]);
1710 if ( !cmdtp->repeatable )
1715 child->argv-=i; /* XXX restore hack so free() can work right */
1718 restore_redirects(squirrel);
1727 for (i = 0; i < pi->num_progs; i++) {
1728 child = & (pi->progs[i]);
1730 /* pipes are inserted between pairs of commands */
1731 if ((i + 1) < pi->num_progs) {
1732 if (pipe(pipefds)<0) perror_msg_and_die("pipe");
1733 nextout = pipefds[1];
1739 /* XXX test for failed fork()? */
1740 if (!(child->pid = fork())) {
1741 /* Set the handling for job control signals back to the default. */
1742 signal(SIGINT, SIG_DFL);
1743 signal(SIGQUIT, SIG_DFL);
1744 signal(SIGTERM, SIG_DFL);
1745 signal(SIGTSTP, SIG_DFL);
1746 signal(SIGTTIN, SIG_DFL);
1747 signal(SIGTTOU, SIG_DFL);
1748 signal(SIGCHLD, SIG_DFL);
1760 if (pipefds[0]!=-1) {
1761 close(pipefds[0]); /* opposite end of our output pipe */
1764 /* Like bash, explicit redirects override pipes,
1765 * and the pipe fd is available for dup'ing. */
1766 setup_redirects(child,NULL);
1768 if (interactive && pi->followup!=PIPE_BG) {
1769 /* If we (the child) win the race, put ourselves in the process
1770 * group whose leader is the first process in this pipe. */
1772 pi->pgrp = getpid();
1774 if (setpgid(0, pi->pgrp) == 0) {
1775 tcsetpgrp(2, pi->pgrp);
1783 /* put our child in the process group whose leader is the
1784 first process in this pipe */
1786 pi->pgrp = child->pid;
1788 /* Don't check for errors. The child may be dead already,
1789 * in which case setpgid returns error code EACCES. */
1790 setpgid(child->pid, pi->pgrp);
1797 /* If there isn't another process, nextin is garbage
1798 but it doesn't matter */
1799 nextin = pipefds[0];
1805 static int run_list_real(struct pipe *pi)
1807 char *save_name = NULL;
1809 char **save_list = NULL;
1815 int rcode=0, flag_skip=1;
1816 int flag_restore = 0;
1817 int if_code=0, next_if_code=0; /* need double-buffer to handle elif */
1818 reserved_style rmode, skip_more_in_this_rmode=RES_XXXX;
1819 /* check syntax for "for" */
1820 for (rpipe = pi; rpipe; rpipe = rpipe->next) {
1821 if ((rpipe->r_mode == RES_IN ||
1822 rpipe->r_mode == RES_FOR) &&
1823 (rpipe->next == NULL)) {
1830 if ((rpipe->r_mode == RES_IN &&
1831 (rpipe->next->r_mode == RES_IN &&
1832 rpipe->next->progs->argv != NULL))||
1833 (rpipe->r_mode == RES_FOR &&
1834 rpipe->next->r_mode != RES_IN)) {
1842 for (; pi; pi = (flag_restore != 0) ? rpipe : pi->next) {
1843 if (pi->r_mode == RES_WHILE || pi->r_mode == RES_UNTIL ||
1844 pi->r_mode == RES_FOR) {
1848 if ((had_ctrlc())) {
1859 debug_printf("rmode=%d if_code=%d next_if_code=%d skip_more=%d\n", rmode, if_code, next_if_code, skip_more_in_this_rmode);
1860 if (rmode == skip_more_in_this_rmode && flag_skip) {
1861 if (pi->followup == PIPE_SEQ) flag_skip=0;
1865 skip_more_in_this_rmode = RES_XXXX;
1866 if (rmode == RES_THEN || rmode == RES_ELSE) if_code = next_if_code;
1867 if (rmode == RES_THEN && if_code) continue;
1868 if (rmode == RES_ELSE && !if_code) continue;
1869 if (rmode == RES_ELIF && !if_code) break;
1870 if (rmode == RES_FOR && pi->num_progs) {
1872 /* if no variable values after "in" we skip "for" */
1873 if (!pi->next->progs->argv) continue;
1874 /* create list of variable values */
1875 list = make_list_in(pi->next->progs->argv,
1876 pi->progs->argv[0]);
1878 save_name = pi->progs->argv[0];
1879 pi->progs->argv[0] = NULL;
1883 free(pi->progs->argv[0]);
1887 pi->progs->argv[0] = save_name;
1889 pi->progs->glob_result.gl_pathv[0] =
1894 /* insert new value from list for variable */
1895 if (pi->progs->argv[0])
1896 free(pi->progs->argv[0]);
1897 pi->progs->argv[0] = *list++;
1899 pi->progs->glob_result.gl_pathv[0] =
1904 if (rmode == RES_IN) continue;
1905 if (rmode == RES_DO) {
1906 if (!flag_rep) continue;
1908 if ((rmode == RES_DONE)) {
1915 if (pi->num_progs == 0) continue;
1917 save_num_progs = pi->num_progs; /* save number of programs */
1919 rcode = run_pipe_real(pi);
1920 debug_printf("run_pipe_real returned %d\n",rcode);
1923 /* We only ran a builtin: rcode was set by the return value
1924 * of run_pipe_real(), and we don't need to wait for anything. */
1925 } else if (pi->followup==PIPE_BG) {
1926 /* XXX check bash's behavior with nontrivial pipes */
1927 /* XXX compute jobid */
1928 /* XXX what does bash do with attempts to background builtins? */
1930 rcode = EXIT_SUCCESS;
1933 /* move the new process group into the foreground */
1934 if (tcsetpgrp(shell_terminal, pi->pgrp) && errno != ENOTTY)
1935 perror_msg("tcsetpgrp-3");
1936 rcode = checkjobs(pi);
1937 /* move the shell to the foreground */
1938 if (tcsetpgrp(shell_terminal, getpgid(0)) && errno != ENOTTY)
1939 perror_msg("tcsetpgrp-4");
1941 rcode = checkjobs(pi);
1943 debug_printf("checkjobs returned %d\n",rcode);
1945 last_return_code=rcode;
1948 last_return_code = -rcode - 2;
1949 return -2; /* exit */
1951 last_return_code=(rcode == 0) ? 0 : 1;
1954 pi->num_progs = save_num_progs; /* restore number of programs */
1956 if ( rmode == RES_IF || rmode == RES_ELIF )
1957 next_if_code=rcode; /* can be overwritten a number of times */
1958 if (rmode == RES_WHILE)
1959 flag_rep = !last_return_code;
1960 if (rmode == RES_UNTIL)
1961 flag_rep = last_return_code;
1962 if ( (rcode==EXIT_SUCCESS && pi->followup==PIPE_OR) ||
1963 (rcode!=EXIT_SUCCESS && pi->followup==PIPE_AND) )
1964 skip_more_in_this_rmode=rmode;
1972 /* broken, of course, but OK for testing */
1973 static char *indenter(int i)
1975 static char blanks[]=" ";
1976 return &blanks[sizeof(blanks)-i-1];
1979 /* return code is the exit status of the pipe */
1980 static int free_pipe(struct pipe *pi, int indent)
1983 struct child_prog *child;
1985 struct redir_struct *r, *rnext;
1987 int a, i, ret_code=0;
1988 char *ind = indenter(indent);
1991 if (pi->stopped_progs > 0)
1993 final_printf("%s run pipe: (pid %d)\n",ind,getpid());
1995 for (i=0; i<pi->num_progs; i++) {
1996 child = &pi->progs[i];
1997 final_printf("%s command %d:\n",ind,i);
1999 for (a=0,p=child->argv; *p; a++,p++) {
2000 final_printf("%s argv[%d] = %s\n",ind,a,*p);
2003 globfree(&child->glob_result);
2005 for (a = 0; a < child->argc; a++) {
2006 free(child->argv[a]);
2012 } else if (child->group) {
2014 final_printf("%s begin group (subshell:%d)\n",ind, child->subshell);
2016 ret_code = free_pipe_list(child->group,indent+3);
2017 final_printf("%s end group\n",ind);
2019 final_printf("%s (nil)\n",ind);
2022 for (r=child->redirects; r; r=rnext) {
2023 final_printf("%s redirect %d%s", ind, r->fd, redir_table[r->type].descrip);
2025 /* guard against the case >$FOO, where foo is unset or blank */
2026 if (r->word.gl_pathv) {
2027 final_printf(" %s\n", *r->word.gl_pathv);
2031 final_printf("&%d\n", r->dup);
2036 child->redirects=NULL;
2039 free(pi->progs); /* children are an array, they get freed all at once */
2044 static int free_pipe_list(struct pipe *head, int indent)
2046 int rcode=0; /* if list has no members */
2047 struct pipe *pi, *next;
2048 char *ind = indenter(indent);
2049 for (pi=head; pi; pi=next) {
2050 final_printf("%s pipe reserved mode %d\n", ind, pi->r_mode);
2051 rcode = free_pipe(pi, indent);
2052 final_printf("%s pipe followup code %d\n", ind, pi->followup);
2060 /* Select which version we will use */
2061 static int run_list(struct pipe *pi)
2067 rcode = run_list_real(pi);
2071 /* free_pipe_list has the side effect of clearing memory
2072 * In the long run that function can be merged with run_list_real,
2073 * but doing that now would hobble the debugging effort. */
2074 free_pipe_list(pi,0);
2078 /* The API for glob is arguably broken. This routine pushes a non-matching
2079 * string into the output structure, removing non-backslashed backslashes.
2080 * If someone can prove me wrong, by performing this function within the
2081 * original glob(3) api, feel free to rewrite this routine into oblivion.
2082 * Return code (0 vs. GLOB_NOSPACE) matches glob(3).
2083 * XXX broken if the last character is '\\', check that before calling.
2086 static int globhack(const char *src, int flags, glob_t *pglob)
2091 for (cnt=1, s=src; s && *s; s++) {
2092 if (*s == '\\') s++;
2096 if (!dest) return GLOB_NOSPACE;
2097 if (!(flags & GLOB_APPEND)) {
2098 pglob->gl_pathv=NULL;
2103 pathc = ++pglob->gl_pathc;
2104 pglob->gl_pathv = realloc(pglob->gl_pathv, (pathc+1)*sizeof(*pglob->gl_pathv));
2105 if (pglob->gl_pathv == NULL) return GLOB_NOSPACE;
2106 pglob->gl_pathv[pathc-1]=dest;
2107 pglob->gl_pathv[pathc]=NULL;
2108 for (s=src; s && *s; s++, dest++) {
2109 if (*s == '\\') s++;
2116 /* XXX broken if the last character is '\\', check that before calling */
2117 static int glob_needed(const char *s)
2120 if (*s == '\\') s++;
2121 if (strchr("*[?",*s)) return 1;
2127 static void globprint(glob_t *pglob)
2130 debug_printf("glob_t at %p:\n", pglob);
2131 debug_printf(" gl_pathc=%d gl_pathv=%p gl_offs=%d gl_flags=%d\n",
2132 pglob->gl_pathc, pglob->gl_pathv, pglob->gl_offs, pglob->gl_flags);
2133 for (i=0; i<pglob->gl_pathc; i++)
2134 debug_printf("pglob->gl_pathv[%d] = %p = %s\n", i,
2135 pglob->gl_pathv[i], pglob->gl_pathv[i]);
2139 static int xglob(o_string *dest, int flags, glob_t *pglob)
2143 /* short-circuit for null word */
2144 /* we can code this better when the debug_printf's are gone */
2145 if (dest->length == 0) {
2146 if (dest->nonnull) {
2147 /* bash man page calls this an "explicit" null */
2148 gr = globhack(dest->data, flags, pglob);
2149 debug_printf("globhack returned %d\n",gr);
2153 } else if (glob_needed(dest->data)) {
2154 gr = glob(dest->data, flags, NULL, pglob);
2155 debug_printf("glob returned %d\n",gr);
2156 if (gr == GLOB_NOMATCH) {
2157 /* quote removal, or more accurately, backslash removal */
2158 gr = globhack(dest->data, flags, pglob);
2159 debug_printf("globhack returned %d\n",gr);
2162 gr = globhack(dest->data, flags, pglob);
2163 debug_printf("globhack returned %d\n",gr);
2165 if (gr == GLOB_NOSPACE)
2166 error_msg_and_die("out of memory during glob");
2167 if (gr != 0) { /* GLOB_ABORTED ? */
2168 error_msg("glob(3) error %d",gr);
2170 /* globprint(glob_target); */
2176 static char *get_dollar_var(char ch);
2179 /* This is used to get/check local shell variables */
2180 static char *get_local_var(const char *s)
2182 struct variables *cur;
2189 return get_dollar_var(s[1]);
2192 for (cur = top_vars; cur; cur=cur->next)
2193 if(strcmp(cur->name, s)==0)
2198 /* This is used to set local shell variables
2199 flg_export==0 if only local (not exporting) variable
2200 flg_export==1 if "new" exporting environ
2201 flg_export>1 if current startup environ (not call putenv()) */
2202 int set_local_var(const char *s, int flg_export)
2206 struct variables *cur;
2209 /* might be possible! */
2217 if (getenv(name) != NULL) {
2219 "There is a global environment variable with the same name.\n");
2224 /* Assume when we enter this function that we are already in
2225 * NAME=VALUE format. So the first order of business is to
2226 * split 's' on the '=' into 'name' and 'value' */
2227 value = strchr(name, '=');
2228 if (value==0 && ++value==0) {
2234 for(cur = top_vars; cur; cur = cur->next) {
2235 if(strcmp(cur->name, name)==0)
2240 if(strcmp(cur->value, value)==0) {
2241 if(flg_export>0 && cur->flg_export==0)
2242 cur->flg_export=flg_export;
2246 if(cur->flg_read_only) {
2247 error_msg("%s: readonly variable", name);
2250 if(flg_export>0 || cur->flg_export>1)
2254 cur->value = strdup(value);
2258 cur = malloc(sizeof(struct variables));
2262 cur->name = strdup(name);
2263 if(cur->name == 0) {
2267 struct variables *bottom = top_vars;
2268 cur->value = strdup(value);
2270 cur->flg_export = flg_export;
2271 cur->flg_read_only = 0;
2272 while(bottom->next) bottom=bottom->next;
2279 if(result==0 && cur->flg_export==1) {
2281 result = putenv(name);
2286 if(result>0) /* equivalent to previous set */
2293 void unset_local_var(const char *name)
2295 struct variables *cur;
2298 for (cur = top_vars; cur; cur=cur->next) {
2299 if(strcmp(cur->name, name)==0)
2303 struct variables *next = top_vars;
2304 if(cur->flg_read_only) {
2305 error_msg("%s: readonly variable", name);
2310 unsetenv(cur->name);
2314 while (next->next != cur)
2316 next->next = cur->next;
2323 static int is_assignment(const char *s)
2328 if (!isalpha(*s)) return 0;
2330 while(isalnum(*s) || *s=='_') ++s;
2335 /* the src parameter allows us to peek forward to a possible &n syntax
2336 * for file descriptor duplication, e.g., "2>&1".
2337 * Return code is 0 normally, 1 if a syntax error is detected in src.
2338 * Resource errors (in xmalloc) cause the process to exit */
2339 static int setup_redirect(struct p_context *ctx, int fd, redir_type style,
2340 struct in_str *input)
2342 struct child_prog *child=ctx->child;
2343 struct redir_struct *redir = child->redirects;
2344 struct redir_struct *last_redir=NULL;
2346 /* Create a new redir_struct and drop it onto the end of the linked list */
2351 redir = xmalloc(sizeof(struct redir_struct));
2353 redir->word.gl_pathv=NULL;
2355 last_redir->next=redir;
2357 child->redirects=redir;
2361 redir->fd= (fd==-1) ? redir_table[style].default_fd : fd ;
2363 debug_printf("Redirect type %d%s\n", redir->fd, redir_table[style].descrip);
2365 /* Check for a '2>&1' type redirect */
2366 redir->dup = redirect_dup_num(input);
2367 if (redir->dup == -2) return 1; /* syntax error */
2368 if (redir->dup != -1) {
2369 /* Erik had a check here that the file descriptor in question
2370 * is legit; I postpone that to "run time"
2371 * A "-" representation of "close me" shows up as a -3 here */
2372 debug_printf("Duplicating redirect '%d>&%d'\n", redir->fd, redir->dup);
2374 /* We do _not_ try to open the file that src points to,
2375 * since we need to return and let src be expanded first.
2376 * Set ctx->pending_redirect, so we know what to do at the
2377 * end of the next parsed word.
2379 ctx->pending_redirect = redir;
2385 struct pipe *new_pipe(void) {
2387 pi = xmalloc(sizeof(struct pipe));
2391 pi->followup = 0; /* invalid */
2392 pi->r_mode = RES_NONE;
2396 static void initialize_context(struct p_context *ctx)
2400 ctx->pending_redirect=NULL;
2403 ctx->list_head=new_pipe();
2404 ctx->pipe=ctx->list_head;
2410 done_command(ctx); /* creates the memory for working child */
2413 /* normal return is 0
2414 * if a reserved word is found, and processed, return 1
2415 * should handle if, then, elif, else, fi, for, while, until, do, done.
2416 * case, function, and select are obnoxious, save those for later.
2418 struct reserved_combo {
2423 /* Mostly a list of accepted follow-up reserved words.
2424 * FLAG_END means we are done with the sequence, and are ready
2425 * to turn the compound list into a command.
2426 * FLAG_START means the word must start a new compound list.
2428 static struct reserved_combo reserved_list[] = {
2429 { "if", RES_IF, FLAG_THEN | FLAG_START },
2430 { "then", RES_THEN, FLAG_ELIF | FLAG_ELSE | FLAG_FI },
2431 { "elif", RES_ELIF, FLAG_THEN },
2432 { "else", RES_ELSE, FLAG_FI },
2433 { "fi", RES_FI, FLAG_END },
2434 { "for", RES_FOR, FLAG_IN | FLAG_START },
2435 { "while", RES_WHILE, FLAG_DO | FLAG_START },
2436 { "until", RES_UNTIL, FLAG_DO | FLAG_START },
2437 { "in", RES_IN, FLAG_DO },
2438 { "do", RES_DO, FLAG_DONE },
2439 { "done", RES_DONE, FLAG_END }
2441 #define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo))
2443 int reserved_word(o_string *dest, struct p_context *ctx)
2445 struct reserved_combo *r;
2446 for (r=reserved_list;
2447 r<reserved_list+NRES; r++) {
2448 if (strcmp(dest->data, r->literal) == 0) {
2449 debug_printf("found reserved word %s, code %d\n",r->literal,r->code);
2450 if (r->flag & FLAG_START) {
2451 struct p_context *new = xmalloc(sizeof(struct p_context));
2452 debug_printf("push stack\n");
2453 if (ctx->w == RES_IN || ctx->w == RES_FOR) {
2460 *new = *ctx; /* physical copy */
2461 initialize_context(ctx);
2463 } else if ( ctx->w == RES_NONE || ! (ctx->old_flag & (1<<r->code))) {
2470 ctx->old_flag = r->flag;
2471 if (ctx->old_flag & FLAG_END) {
2472 struct p_context *old;
2473 debug_printf("pop stack\n");
2474 done_pipe(ctx,PIPE_SEQ);
2476 old->child->group = ctx->list_head;
2478 old->child->subshell = 0;
2480 *ctx = *old; /* physical copy */
2490 /* normal return is 0.
2491 * Syntax or xglob errors return 1. */
2492 static int done_word(o_string *dest, struct p_context *ctx)
2494 struct child_prog *child=ctx->child;
2496 glob_t *glob_target;
2503 debug_printf("done_word: %s %p\n", dest->data, child);
2504 if (dest->length == 0 && !dest->nonnull) {
2505 debug_printf(" true null, ignored\n");
2509 if (ctx->pending_redirect) {
2510 glob_target = &ctx->pending_redirect->word;
2515 return 1; /* syntax error, groups and arglists don't mix */
2517 if (!child->argv && (ctx->type & FLAG_PARSE_SEMICOLON)) {
2518 debug_printf("checking %s for reserved-ness\n",dest->data);
2519 if (reserved_word(dest,ctx)) return ctx->w==RES_SNTX;
2522 glob_target = &child->glob_result;
2523 if (child->argv) flags |= GLOB_APPEND;
2525 for (cnt = 1, s = dest->data; s && *s; s++) {
2526 if (*s == '\\') s++;
2531 if ( child->argv == NULL) {
2534 argc = ++child->argc;
2535 child->argv = realloc(child->argv, (argc+1)*sizeof(*child->argv));
2536 if (child->argv == NULL) return 1;
2537 child->argv[argc-1]=str;
2538 child->argv[argc]=NULL;
2539 for (s = dest->data; s && *s; s++,str++) {
2540 if (*s == '\\') s++;
2547 gr = xglob(dest, flags, glob_target);
2548 if (gr != 0) return 1;
2553 if (ctx->pending_redirect) {
2554 ctx->pending_redirect=NULL;
2555 if (glob_target->gl_pathc != 1) {
2556 error_msg("ambiguous redirect");
2560 child->argv = glob_target->gl_pathv;
2563 if (ctx->w == RES_FOR) {
2564 done_word(dest,ctx);
2565 done_pipe(ctx,PIPE_SEQ);
2570 /* The only possible error here is out of memory, in which case
2572 static int done_command(struct p_context *ctx)
2574 /* The child is really already in the pipe structure, so
2575 * advance the pipe counter and make a new, null child.
2576 * Only real trickiness here is that the uncommitted
2577 * child structure, to which ctx->child points, is not
2578 * counted in pi->num_progs. */
2579 struct pipe *pi=ctx->pipe;
2580 struct child_prog *prog=ctx->child;
2582 if (prog && prog->group == NULL
2583 && prog->argv == NULL
2585 && prog->redirects == NULL) {
2589 debug_printf("done_command: skipping null command\n");
2593 debug_printf("done_command: num_progs incremented to %d\n",pi->num_progs);
2595 debug_printf("done_command: initializing\n");
2597 pi->progs = xrealloc(pi->progs, sizeof(*pi->progs) * (pi->num_progs+1));
2599 prog = pi->progs + pi->num_progs;
2601 prog->redirects = NULL;
2605 prog->is_stopped = 0;
2609 prog->glob_result.gl_pathv = NULL;
2614 prog->type = ctx->type;
2616 /* but ctx->pipe and ctx->list_head remain unchanged */
2620 static int done_pipe(struct p_context *ctx, pipe_style type)
2623 done_command(ctx); /* implicit closure of previous command */
2624 debug_printf("done_pipe, type %d\n", type);
2625 ctx->pipe->followup = type;
2626 ctx->pipe->r_mode = ctx->w;
2628 ctx->pipe->next = new_p;
2631 done_command(ctx); /* set up new pipe to accept commands */
2636 /* peek ahead in the in_str to find out if we have a "&n" construct,
2637 * as in "2>&1", that represents duplicating a file descriptor.
2638 * returns either -2 (syntax error), -1 (no &), or the number found.
2640 static int redirect_dup_num(struct in_str *input)
2644 if (ch != '&') return -1;
2646 b_getch(input); /* get the & */
2650 return -3; /* "-" represents "close me" */
2652 while (isdigit(ch)) {
2660 error_msg("ambiguous redirect");
2664 /* If a redirect is immediately preceded by a number, that number is
2665 * supposed to tell which file descriptor to redirect. This routine
2666 * looks for such preceding numbers. In an ideal world this routine
2667 * needs to handle all the following classes of redirects...
2668 * echo 2>foo # redirects fd 2 to file "foo", nothing passed to echo
2669 * echo 49>foo # redirects fd 49 to file "foo", nothing passed to echo
2670 * echo -2>foo # redirects fd 1 to file "foo", "-2" passed to echo
2671 * echo 49x>foo # redirects fd 1 to file "foo", "49x" passed to echo
2672 * A -1 output from this program means no valid number was found, so the
2673 * caller should use the appropriate default for this redirection.
2675 static int redirect_opt_num(o_string *o)
2679 if (o->length==0) return -1;
2680 for(num=0; num<o->length; num++) {
2681 if (!isdigit(*(o->data+num))) {
2685 /* reuse num (and save an int) */
2691 FILE *generate_stream_from_list(struct pipe *head)
2695 int pid, channel[2];
2696 if (pipe(channel)<0) perror_msg_and_die("pipe");
2699 perror_msg_and_die("fork");
2700 } else if (pid==0) {
2702 if (channel[1] != 1) {
2707 #define SURROGATE "surrogate response"
2708 write(1,SURROGATE,sizeof(SURROGATE));
2709 _exit(run_list(head));
2711 _exit(run_list_real(head)); /* leaks memory */
2714 debug_printf("forked child %d\n",pid);
2716 pf = fdopen(channel[0],"r");
2717 debug_printf("pipe on FILE *%p\n",pf);
2719 free_pipe_list(head,0);
2720 pf=popen("echo surrogate response","r");
2721 debug_printf("started fake pipe on FILE *%p\n",pf);
2726 /* this version hacked for testing purposes */
2727 /* return code is exit status of the process that is run. */
2728 static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end)
2731 o_string result=NULL_O_STRING;
2732 struct p_context inner;
2734 struct in_str pipe_str;
2735 initialize_context(&inner);
2737 /* recursion to generate command */
2738 retcode = parse_stream(&result, &inner, input, subst_end);
2739 if (retcode != 0) return retcode; /* syntax error or EOF */
2740 done_word(&result, &inner);
2741 done_pipe(&inner, PIPE_SEQ);
2744 p=generate_stream_from_list(inner.list_head);
2745 if (p==NULL) return 1;
2746 mark_open(fileno(p));
2747 setup_file_in_str(&pipe_str, p);
2749 /* now send results of command back into original context */
2750 retcode = parse_stream(dest, ctx, &pipe_str, '\0');
2751 /* XXX In case of a syntax error, should we try to kill the child?
2752 * That would be tough to do right, so just read until EOF. */
2754 while (b_getch(&pipe_str)!=EOF) { /* discard */ };
2757 debug_printf("done reading from pipe, pclose()ing\n");
2758 /* This is the step that wait()s for the child. Should be pretty
2759 * safe, since we just read an EOF from its stdout. We could try
2760 * to better, by using wait(), and keeping track of background jobs
2761 * at the same time. That would be a lot of work, and contrary
2762 * to the KISS philosophy of this program. */
2763 mark_closed(fileno(p));
2765 free_pipe_list(inner.list_head,0);
2766 debug_printf("pclosed, retcode=%d\n",retcode);
2767 /* XXX this process fails to trim a single trailing newline */
2771 static int parse_group(o_string *dest, struct p_context *ctx,
2772 struct in_str *input, int ch)
2775 struct p_context sub;
2776 struct child_prog *child = ctx->child;
2779 return 1; /* syntax error, groups and arglists don't mix */
2781 initialize_context(&sub);
2783 case '(': endch=')'; child->subshell=1; break;
2784 case '{': endch='}'; break;
2785 default: syntax(); /* really logic error */
2787 rcode=parse_stream(dest,&sub,input,endch);
2788 done_word(dest,&sub); /* finish off the final word in the subcontext */
2789 done_pipe(&sub, PIPE_SEQ); /* and the final command there, too */
2790 child->group = sub.list_head;
2792 /* child remains "open", available for possible redirects */
2796 /* basically useful version until someone wants to get fancier,
2797 * see the bash man page under "Parameter Expansion" */
2798 static char *lookup_param(char *src)
2807 p = get_local_var(src);
2813 static char *get_dollar_var(char ch)
2815 static char buf[40];
2820 sprintf(buf, "%u", (unsigned int)last_return_code);
2829 /* return code: 0 for OK, 1 for syntax error */
2830 static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input)
2840 int ch = input->peek(input); /* first character after the $ */
2841 debug_printf("handle_dollar: ch=%c\n",ch);
2843 b_addchr(dest, SPECIAL_VAR_SYMBOL);
2845 while(ch=b_peek(input),isalnum(ch) || ch=='_') {
2849 b_addchr(dest, SPECIAL_VAR_SYMBOL);
2851 } else if (isdigit(ch)) {
2852 i = ch-'0'; /* XXX is $0 special? */
2853 if (i<global_argc) {
2854 parse_string(dest, ctx, global_argv[i]); /* recursion */
2858 } else switch (ch) {
2861 b_adduint(dest,getpid());
2865 if (last_bg_pid > 0) b_adduint(dest, last_bg_pid);
2871 b_adduint(dest,last_return_code);
2874 b_addchr(dest, SPECIAL_VAR_SYMBOL);
2875 b_addchr(dest, '$');
2876 b_addchr(dest, '?');
2877 b_addchr(dest, SPECIAL_VAR_SYMBOL);
2883 b_adduint(dest,global_argc ? global_argc-1 : 0);
2888 b_addchr(dest, SPECIAL_VAR_SYMBOL);
2891 /* XXX maybe someone will try to escape the '}' */
2892 while(ch=b_getch(input),ch!=EOF && ch!='}') {
2899 b_addchr(dest, SPECIAL_VAR_SYMBOL);
2904 process_command_subs(dest, ctx, input, ')');
2908 for (i=1; i<global_argc; i++) {
2909 parse_string(dest, ctx, global_argv[i]);
2910 if (i+1 < global_argc) parse_string(dest, ctx, sep);
2916 /* still unhandled, but should be eventually */
2917 error_msg("unhandled syntax: $%c",ch);
2922 b_addqchr(dest,'$',dest->quote);
2924 /* Eat the character if the flag was set. If the compiler
2925 * is smart enough, we could substitute "b_getch(input);"
2926 * for all the "advance = 1;" above, and also end up with
2927 * a nice size-optimized program. Hah! That'll be the day.
2929 if (advance) b_getch(input);
2934 int parse_string(o_string *dest, struct p_context *ctx, const char *src)
2937 setup_string_in_str(&foo, src);
2938 return parse_stream(dest, ctx, &foo, '\0');
2942 /* return code is 0 for normal exit, 1 for syntax error */
2943 int parse_stream(o_string *dest, struct p_context *ctx,
2944 struct in_str *input, int end_trigger)
2949 redir_type redir_style;
2953 /* Only double-quote state is handled in the state variable dest->quote.
2954 * A single-quote triggers a bypass of the main loop until its mate is
2955 * found. When recursing, quote state is passed in via dest->quote. */
2957 debug_printf("parse_stream, end_trigger=%d\n",end_trigger);
2958 while ((ch=b_getch(input))!=EOF) {
2961 if (input->__promptme == 0) return 1;
2963 next = (ch == '\n') ? 0 : b_peek(input);
2965 debug_printf("parse_stream: ch=%c (%d) m=%d quote=%d - %c\n",
2966 ch >= ' ' ? ch : '.', ch, m,
2967 dest->quote, ctx->stack == NULL ? '*' : '.');
2969 if (m==0 || ((m==1 || m==2) && dest->quote)) {
2970 b_addqchr(dest, ch, dest->quote);
2972 if (m==2) { /* unquoted IFS */
2973 if (done_word(dest, ctx)) {
2976 /* If we aren't performing a substitution, treat a newline as a
2977 * command separator. */
2978 if (end_trigger != '\0' && ch=='\n')
2979 done_pipe(ctx,PIPE_SEQ);
2981 if (ch == end_trigger && !dest->quote && ctx->w==RES_NONE) {
2982 debug_printf("leaving parse_stream (triggered)\n");
2987 /* Yahoo! Time to run with it! */
2988 done_pipe(ctx,PIPE_SEQ);
2989 run_list(ctx->list_head);
2990 initialize_context(ctx);
2993 if (m!=2) switch (ch) {
2995 if (dest->length == 0 && !dest->quote) {
2996 while(ch=b_peek(input),ch!=EOF && ch!='\n') { b_getch(input); }
2998 b_addqchr(dest, ch, dest->quote);
3006 b_addqchr(dest, '\\', dest->quote);
3007 b_addqchr(dest, b_getch(input), dest->quote);
3010 if (handle_dollar(dest, ctx, input)!=0) return 1;
3014 while(ch=b_getch(input),ch!=EOF && ch!='\'') {
3016 if(input->__promptme == 0) return 1;
3027 dest->quote = !dest->quote;
3031 process_command_subs(dest, ctx, input, '`');
3034 redir_fd = redirect_opt_num(dest);
3035 done_word(dest, ctx);
3036 redir_style=REDIRECT_OVERWRITE;
3038 redir_style=REDIRECT_APPEND;
3040 } else if (next == '(') {
3041 syntax(); /* until we support >(list) Process Substitution */
3044 setup_redirect(ctx, redir_fd, redir_style, input);
3047 redir_fd = redirect_opt_num(dest);
3048 done_word(dest, ctx);
3049 redir_style=REDIRECT_INPUT;
3051 redir_style=REDIRECT_HEREIS;
3053 } else if (next == '>') {
3054 redir_style=REDIRECT_IO;
3056 } else if (next == '(') {
3057 syntax(); /* until we support <(list) Process Substitution */
3060 setup_redirect(ctx, redir_fd, redir_style, input);
3064 done_word(dest, ctx);
3065 done_pipe(ctx,PIPE_SEQ);
3068 done_word(dest, ctx);
3071 done_pipe(ctx,PIPE_AND);
3074 done_pipe(ctx,PIPE_BG);
3082 done_word(dest, ctx);
3085 done_pipe(ctx,PIPE_OR);
3087 /* we could pick up a file descriptor choice here
3088 * with redirect_opt_num(), but bash doesn't do it.
3089 * "echo foo 2| cat" yields "foo 2". */
3101 if (parse_group(dest, ctx, input, ch)!=0) return 1;
3105 syntax(); /* Proper use of this character caught by end_trigger */
3110 syntax(); /* this is really an internal logic error */
3115 /* complain if quote? No, maybe we just finished a command substitution
3116 * that was quoted. Example:
3117 * $ echo "`cat foo` plus more"
3118 * and we just got the EOF generated by the subshell that ran "cat foo"
3119 * The only real complaint is if we got an EOF when end_trigger != '\0',
3120 * that is, we were really supposed to get end_trigger, and never got
3121 * one before the EOF. Can't use the standard "syntax error" return code,
3122 * so that parse_stream_outer can distinguish the EOF and exit smoothly. */
3123 debug_printf("leaving parse_stream (EOF)\n");
3124 if (end_trigger != '\0') return -1;
3128 void mapset(const unsigned char *set, int code)
3130 const unsigned char *s;
3131 for (s=set; *s; s++) map[*s] = code;
3134 void update_ifs_map(void)
3136 /* char *ifs and char map[256] are both globals. */
3137 ifs = (uchar *)getenv("IFS");
3138 if (ifs == NULL) ifs=(uchar *)" \t\n";
3139 /* Precompute a list of 'flow through' behavior so it can be treated
3140 * quickly up front. Computation is necessary because of IFS.
3141 * Special case handling of IFS == " \t\n" is not implemented.
3142 * The map[] array only really needs two bits each, and on most machines
3143 * that would be faster because of the reduced L1 cache footprint.
3145 memset(map,0,sizeof(map)); /* most characters flow through always */
3147 mapset((uchar *)"\\$'\"`", 3); /* never flow through */
3148 mapset((uchar *)"<>;&|(){}#", 1); /* flow through if quoted */
3150 mapset((uchar *)"\\$'\"", 3); /* never flow through */
3151 mapset((uchar *)";&|#", 1); /* flow through if quoted */
3153 mapset(ifs, 2); /* also flow through if quoted */
3156 /* most recursion does not come through here, the exeception is
3157 * from builtin_source() */
3158 int parse_stream_outer(struct in_str *inp, int flag)
3161 struct p_context ctx;
3162 o_string temp=NULL_O_STRING;
3169 initialize_context(&ctx);
3171 if (!(flag & FLAG_PARSE_SEMICOLON) || (flag & FLAG_REPARSING)) mapset((uchar *)";$&|", 0);
3173 rcode = parse_stream(&temp, &ctx, inp, '\n');
3175 if (rcode == 1) flag_repeat = 0;
3177 if (rcode != 1 && ctx.old_flag != 0) {
3183 if (rcode != 1 && ctx.old_flag == 0) {
3184 done_word(&temp, &ctx);
3185 done_pipe(&ctx,PIPE_SEQ);
3187 run_list(ctx.list_head);
3189 code = run_list(ctx.list_head);
3190 if (code == -2) { /* exit */
3193 /* XXX hackish way to not allow exit from main loop */
3194 if (inp->peek == file_peek) {
3195 printf("exit not allowed from main input shell.\n");
3204 if (ctx.old_flag != 0) {
3209 if (inp->__promptme == 0) printf("<INTERRUPT>\n");
3210 inp->__promptme = 1;
3215 free_pipe_list(ctx.list_head,0);
3218 } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP)); /* loop on syntax errors, return on EOF */
3222 return (code != 0) ? 1 : 0;
3223 #endif /* __U_BOOT__ */
3227 static int parse_string_outer(const char *s, int flag)
3229 int parse_string_outer(char *s, int flag)
3230 #endif /* __U_BOOT__ */
3232 struct in_str input;
3238 if (!(p = strchr(s, '\n')) || *++p) {
3239 p = xmalloc(strlen(s) + 2);
3242 setup_string_in_str(&input, p);
3243 rcode = parse_stream_outer(&input, flag);
3248 setup_string_in_str(&input, s);
3249 return parse_stream_outer(&input, flag);
3256 static int parse_file_outer(FILE *f)
3258 int parse_file_outer(void)
3262 struct in_str input;
3264 setup_file_in_str(&input, f);
3266 setup_file_in_str(&input);
3268 rcode = parse_stream_outer(&input, FLAG_PARSE_SEMICOLON);
3273 #ifndef CONFIG_RELOC_FIXUP_WORKS
3274 static void u_boot_hush_reloc(void)
3277 struct reserved_combo *r;
3279 for (r=reserved_list; r<reserved_list+NRES; r++) {
3280 addr = (ulong) (r->literal) + gd->reloc_off;
3281 r->literal = (char *)addr;
3286 int u_boot_hush_start(void)
3288 if (top_vars == NULL) {
3289 top_vars = malloc(sizeof(struct variables));
3290 top_vars->name = "HUSH_VERSION";
3291 top_vars->value = "0.01";
3293 top_vars->flg_export = 0;
3294 top_vars->flg_read_only = 1;
3295 #ifndef CONFIG_RELOC_FIXUP_WORKS
3296 u_boot_hush_reloc();
3302 static void *xmalloc(size_t size)
3306 if (!(p = malloc(size))) {
3307 printf("ERROR : memory not allocated\n");
3313 static void *xrealloc(void *ptr, size_t size)
3317 if (!(p = realloc(ptr, size))) {
3318 printf("ERROR : memory not allocated\n");
3323 #endif /* __U_BOOT__ */
3326 /* Make sure we have a controlling tty. If we get started under a job
3327 * aware app (like bash for example), make sure we are now in charge so
3328 * we don't fight over who gets the foreground */
3329 static void setup_job_control(void)
3331 static pid_t shell_pgrp;
3332 /* Loop until we are in the foreground. */
3333 while (tcgetpgrp (shell_terminal) != (shell_pgrp = getpgrp ()))
3334 kill (- shell_pgrp, SIGTTIN);
3336 /* Ignore interactive and job-control signals. */
3337 signal(SIGINT, SIG_IGN);
3338 signal(SIGQUIT, SIG_IGN);
3339 signal(SIGTERM, SIG_IGN);
3340 signal(SIGTSTP, SIG_IGN);
3341 signal(SIGTTIN, SIG_IGN);
3342 signal(SIGTTOU, SIG_IGN);
3343 signal(SIGCHLD, SIG_IGN);
3345 /* Put ourselves in our own process group. */
3347 shell_pgrp = getpid ();
3348 setpgid (shell_pgrp, shell_pgrp);
3350 /* Grab control of the terminal. */
3351 tcsetpgrp(shell_terminal, shell_pgrp);
3354 int hush_main(int argc, char **argv)
3360 /* XXX what should these be while sourcing /etc/profile? */
3364 /* (re?) initialize globals. Sometimes hush_main() ends up calling
3365 * hush_main(), therefore we cannot rely on the BSS to zero out this
3366 * stuff. Reset these to 0 every time. */
3368 /* map[] is taken care of with call to update_ifs_map() */
3371 close_me_head = NULL;
3376 /* Initialize some more globals to non-zero values */
3378 #ifdef CONFIG_FEATURE_COMMAND_EDITING
3379 cmdedit_set_initial_prompt();
3385 /* initialize our shell local variables with the values
3386 * currently living in the environment */
3389 set_local_var(*e, 2); /* without call putenv() */
3392 last_return_code=EXIT_SUCCESS;
3395 if (argv[0] && argv[0][0] == '-') {
3396 debug_printf("\nsourcing /etc/profile\n");
3397 if ((input = fopen("/etc/profile", "r")) != NULL) {
3398 mark_open(fileno(input));
3399 parse_file_outer(input);
3400 mark_closed(fileno(input));
3406 while ((opt = getopt(argc, argv, "c:xif")) > 0) {
3410 global_argv = argv+optind;
3411 global_argc = argc-optind;
3412 opt = parse_string_outer(optarg, FLAG_PARSE_SEMICOLON);
3424 fprintf(stderr, "Usage: sh [FILE]...\n"
3425 " or: sh -c command [args]...\n\n");
3432 /* A shell is interactive if the `-i' flag was given, or if all of
3433 * the following conditions are met:
3435 * no arguments remaining or the -s flag given
3436 * standard input is a terminal
3437 * standard output is a terminal
3438 * Refer to Posix.2, the description of the `sh' utility. */
3439 if (argv[optind]==NULL && input==stdin &&
3440 isatty(fileno(stdin)) && isatty(fileno(stdout))) {
3444 debug_printf("\ninteractive=%d\n", interactive);
3446 /* Looks like they want an interactive shell */
3447 #ifndef CONFIG_FEATURE_SH_EXTRA_QUIET
3448 printf( "\n\n" BB_BANNER " hush - the humble shell v0.01 (testing)\n");
3449 printf( "Enter 'help' for a list of built-in commands.\n\n");
3451 setup_job_control();
3454 if (argv[optind]==NULL) {
3455 opt=parse_file_outer(stdin);
3459 debug_printf("\nrunning script '%s'\n", argv[optind]);
3460 global_argv = argv+optind;
3461 global_argc = argc-optind;
3462 input = xfopen(argv[optind], "r");
3463 opt = parse_file_outer(input);
3465 #ifdef CONFIG_FEATURE_CLEAN_UP
3467 if (cwd && cwd != unknown)
3470 struct variables *cur, *tmp;
3471 for(cur = top_vars; cur; cur = tmp) {
3473 if (!cur->flg_read_only) {
3483 return(opt?opt:last_return_code);
3487 static char *insert_var_value(char *inp)
3489 int res_str_len = 0;
3492 char *p, *p1, *res_str = NULL;
3494 while ((p = strchr(inp, SPECIAL_VAR_SYMBOL))) {
3497 res_str = xrealloc(res_str, (res_str_len + len));
3498 strncpy((res_str + res_str_len), inp, len);
3502 p = strchr(inp, SPECIAL_VAR_SYMBOL);
3504 if ((p1 = lookup_param(inp))) {
3505 len = res_str_len + strlen(p1);
3506 res_str = xrealloc(res_str, (1 + len));
3507 strcpy((res_str + res_str_len), p1);
3510 *p = SPECIAL_VAR_SYMBOL;
3515 res_str = xrealloc(res_str, (1 + res_str_len + strlen(inp)));
3516 strcpy((res_str + res_str_len), inp);
3517 while ((p = strchr(res_str, '\n'))) {
3521 return (res_str == NULL) ? inp : res_str;
3524 static char **make_list_in(char **inp, char *name)
3527 int name_len = strlen(name);
3532 /* create list of variable values */
3533 list = xmalloc(sizeof(*list));
3534 for (i = 0; inp[i]; i++) {
3535 p3 = insert_var_value(inp[i]);
3542 if ((p2 = strchr(p1, ' '))) {
3548 /* we use n + 2 in realloc for list,because we add
3549 * new element and then we will add NULL element */
3550 list = xrealloc(list, sizeof(*list) * (n + 2));
3551 list[n] = xmalloc(2 + name_len + len);
3552 strcpy(list[n], name);
3553 strcat(list[n], "=");
3554 strncat(list[n], p1, len);
3555 list[n++][name_len + len + 1] = '\0';
3558 if (p3 != inp[i]) free(p3);
3564 /* Make new string for parser */
3565 static char * make_string(char ** inp)
3572 for (n = 0; inp[n]; n++) {
3573 p = insert_var_value(inp[n]);
3574 str = xrealloc(str, (len + strlen(p)));
3581 len = strlen(str) + 3;
3582 if (p != inp[n]) free(p);
3585 *(str + len) = '\n';
3586 *(str + len + 1) = '\0';
3591 int do_showvar (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
3595 struct variables *cur;
3597 if (argc == 1) { /* Print all env variables */
3598 for (cur = top_vars; cur; cur = cur->next) {
3599 printf ("%s=%s\n", cur->name, cur->value);
3601 puts ("\n ** Abort\n");
3607 for (i = 1; i < argc; ++i) { /* print single env variables */
3608 char *name = argv[i];
3611 for (cur = top_vars; cur; cur = cur->next) {
3612 if(strcmp (cur->name, name) == 0) {
3614 printf ("%s=%s\n", cur->name, cur->value);
3617 puts ("\n ** Abort\n");
3622 printf ("## Error: \"%s\" not defined\n", name);
3630 showvar, CONFIG_SYS_MAXARGS, 1, do_showvar,
3631 "print local hushshell variables",
3632 "\n - print values of all hushshell variables\n"
3633 "showvar name ...\n"
3634 " - print value of hushshell variable 'name'"
3638 /****************************************************************************/