3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * SPDX-License-Identifier: GPL-2.0+
13 #include <mtd/cfi_flash.h>
15 extern flash_info_t flash_info[]; /* info for FLASH chips */
17 /*-----------------------------------------------------------------------
21 /*-----------------------------------------------------------------------
22 * Set protection status for monitor sectors
24 * The monitor is always located in the _first_ Flash bank.
25 * If necessary you have to map the second bank at lower addresses.
28 flash_protect (int flag, ulong from, ulong to, flash_info_t *info)
34 /* Do nothing if input data is bad. */
35 if (!info || info->sector_count == 0 || info->size == 0 || to < from) {
39 s_end = info->sector_count - 1; /* index of last sector */
40 b_end = info->start[0] + info->size - 1; /* bank end address */
42 debug ("flash_protect %s: from 0x%08lX to 0x%08lX\n",
43 (flag & FLAG_PROTECT_SET) ? "ON" :
44 (flag & FLAG_PROTECT_CLEAR) ? "OFF" : "???",
47 /* There is nothing to do if we have no data about the flash
48 * or the protect range and flash range don't overlap.
50 if (info->flash_id == FLASH_UNKNOWN ||
51 to < info->start[0] || from > b_end) {
55 for (i=0; i<info->sector_count; ++i) {
56 ulong end; /* last address in current sect */
58 end = (i == s_end) ? b_end : info->start[i + 1] - 1;
60 /* Update protection if any part of the sector
61 * is in the specified range.
63 if (from <= end && to >= info->start[i]) {
64 if (flag & FLAG_PROTECT_CLEAR) {
65 #if defined(CONFIG_SYS_FLASH_PROTECTION)
66 flash_real_protect(info, i, 0);
69 #endif /* CONFIG_SYS_FLASH_PROTECTION */
70 debug ("protect off %d\n", i);
72 else if (flag & FLAG_PROTECT_SET) {
73 #if defined(CONFIG_SYS_FLASH_PROTECTION)
74 flash_real_protect(info, i, 1);
77 #endif /* CONFIG_SYS_FLASH_PROTECTION */
78 debug ("protect on %d\n", i);
84 /*-----------------------------------------------------------------------
88 addr2info (ulong addr)
93 for (i=0, info = &flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
94 if (info->flash_id != FLASH_UNKNOWN &&
95 addr >= info->start[0] &&
96 /* WARNING - The '- 1' is needed if the flash
97 * is at the end of the address space, since
98 * info->start[0] + info->size wraps back to 0.
99 * Please don't change this unless you understand this.
101 addr <= info->start[0] + info->size - 1) {
109 /*-----------------------------------------------------------------------
110 * Copy memory to flash.
111 * Make sure all target addresses are within Flash bounds,
112 * and no protected sectors are hit.
115 * ERR_TIMOUT 1 - write timeout
116 * ERR_NOT_ERASED 2 - Flash not erased
117 * ERR_PROTECTED 4 - target range includes protected sectors
118 * ERR_INVAL 8 - target address not in Flash memory
119 * ERR_ALIGN 16 - target address not aligned on boundary
120 * (only some targets require alignment)
123 flash_write (char *src, ulong addr, ulong cnt)
126 ulong end = addr + cnt - 1;
127 flash_info_t *info_first = addr2info (addr);
128 flash_info_t *info_last = addr2info (end );
130 __maybe_unused char *src_orig = src;
131 __maybe_unused char *addr_orig = (char *)addr;
132 __maybe_unused ulong cnt_orig = cnt;
138 if (!info_first || !info_last) {
142 for (info = info_first; info <= info_last; ++info) {
143 ulong b_end = info->start[0] + info->size; /* bank end addr */
144 short s_end = info->sector_count - 1;
145 for (i=0; i<info->sector_count; ++i) {
146 ulong e_addr = (i == s_end) ? b_end : info->start[i + 1];
148 if ((end >= info->start[i]) && (addr < e_addr) &&
149 (info->protect[i] != 0) ) {
150 return (ERR_PROTECTED);
155 /* finally write data to flash */
156 for (info = info_first; info <= info_last && cnt>0; ++info) {
159 len = info->start[0] + info->size - addr;
162 if ((i = write_buff(info, (uchar *)src, addr, len)) != 0) {
170 #if defined(CONFIG_FLASH_VERIFY)
171 if (memcmp(src_orig, addr_orig, cnt_orig)) {
172 printf("\nVerify failed!\n");
173 return ERR_PROG_ERROR;
175 #endif /* CONFIG_SYS_FLASH_VERIFY_AFTER_WRITE */
180 /*-----------------------------------------------------------------------
183 void flash_perror (int err)
189 puts ("Timeout writing to Flash\n");
192 puts ("Flash not Erased\n");
195 puts ("Can't write to protected Flash sectors\n");
198 puts ("Outside available Flash\n");
201 puts ("Start and/or end address not on sector boundary\n");
203 case ERR_UNKNOWN_FLASH_VENDOR:
204 puts ("Unknown Vendor of Flash\n");
206 case ERR_UNKNOWN_FLASH_TYPE:
207 puts ("Unknown Type of Flash\n");
210 puts ("General Flash Programming Error\n");
213 puts("Flash Programming Aborted\n");
216 printf ("%s[%d] FIXME: rc=%d\n", __FILE__, __LINE__, err);