x86: Switch to using generic global_data setup
[platform/kernel/u-boot.git] / common / board_f.c
1 /*
2  * Copyright (c) 2011 The Chromium OS Authors.
3  * (C) Copyright 2002-2006
4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5  *
6  * (C) Copyright 2002
7  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
8  * Marius Groeger <mgroeger@sysgo.de>
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #include <common.h>
14 #include <linux/compiler.h>
15 #include <version.h>
16 #include <environment.h>
17 #include <dm.h>
18 #include <fdtdec.h>
19 #include <fs.h>
20 #if defined(CONFIG_CMD_IDE)
21 #include <ide.h>
22 #endif
23 #include <i2c.h>
24 #include <initcall.h>
25 #include <logbuff.h>
26 #include <malloc.h>
27 #include <mapmem.h>
28
29 /* TODO: Can we move these into arch/ headers? */
30 #ifdef CONFIG_8xx
31 #include <mpc8xx.h>
32 #endif
33 #ifdef CONFIG_5xx
34 #include <mpc5xx.h>
35 #endif
36 #ifdef CONFIG_MPC5xxx
37 #include <mpc5xxx.h>
38 #endif
39 #if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
40 #include <asm/mp.h>
41 #endif
42
43 #include <os.h>
44 #include <post.h>
45 #include <spi.h>
46 #include <status_led.h>
47 #include <trace.h>
48 #include <watchdog.h>
49 #include <asm/errno.h>
50 #include <asm/io.h>
51 #include <asm/sections.h>
52 #if defined(CONFIG_X86) || defined(CONFIG_ARC)
53 #include <asm/init_helpers.h>
54 #include <asm/relocate.h>
55 #endif
56 #ifdef CONFIG_SANDBOX
57 #include <asm/state.h>
58 #endif
59 #include <dm/root.h>
60 #include <linux/compiler.h>
61
62 /*
63  * Pointer to initial global data area
64  *
65  * Here we initialize it if needed.
66  */
67 #ifdef XTRN_DECLARE_GLOBAL_DATA_PTR
68 #undef  XTRN_DECLARE_GLOBAL_DATA_PTR
69 #define XTRN_DECLARE_GLOBAL_DATA_PTR    /* empty = allocate here */
70 DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR);
71 #else
72 DECLARE_GLOBAL_DATA_PTR;
73 #endif
74
75 /*
76  * TODO(sjg@chromium.org): IMO this code should be
77  * refactored to a single function, something like:
78  *
79  * void led_set_state(enum led_colour_t colour, int on);
80  */
81 /************************************************************************
82  * Coloured LED functionality
83  ************************************************************************
84  * May be supplied by boards if desired
85  */
86 __weak void coloured_LED_init(void) {}
87 __weak void red_led_on(void) {}
88 __weak void red_led_off(void) {}
89 __weak void green_led_on(void) {}
90 __weak void green_led_off(void) {}
91 __weak void yellow_led_on(void) {}
92 __weak void yellow_led_off(void) {}
93 __weak void blue_led_on(void) {}
94 __weak void blue_led_off(void) {}
95
96 /*
97  * Why is gd allocated a register? Prior to reloc it might be better to
98  * just pass it around to each function in this file?
99  *
100  * After reloc one could argue that it is hardly used and doesn't need
101  * to be in a register. Or if it is it should perhaps hold pointers to all
102  * global data for all modules, so that post-reloc we can avoid the massive
103  * literal pool we get on ARM. Or perhaps just encourage each module to use
104  * a structure...
105  */
106
107 /*
108  * Could the CONFIG_SPL_BUILD infection become a flag in gd?
109  */
110
111 #if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG)
112 static int init_func_watchdog_init(void)
113 {
114 # if defined(CONFIG_HW_WATCHDOG) && (defined(CONFIG_BLACKFIN) || \
115         defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \
116         defined(CONFIG_SH) || defined(CONFIG_AT91SAM9_WATCHDOG) || \
117         defined(CONFIG_IMX_WATCHDOG))
118         hw_watchdog_init();
119 # endif
120         puts("       Watchdog enabled\n");
121         WATCHDOG_RESET();
122
123         return 0;
124 }
125
126 int init_func_watchdog_reset(void)
127 {
128         WATCHDOG_RESET();
129
130         return 0;
131 }
132 #endif /* CONFIG_WATCHDOG */
133
134 __weak void board_add_ram_info(int use_default)
135 {
136         /* please define platform specific board_add_ram_info() */
137 }
138
139 static int init_baud_rate(void)
140 {
141         gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
142         return 0;
143 }
144
145 static int display_text_info(void)
146 {
147 #if !defined(CONFIG_SANDBOX) && !defined(CONFIG_EFI_APP)
148         ulong bss_start, bss_end, text_base;
149
150         bss_start = (ulong)&__bss_start;
151         bss_end = (ulong)&__bss_end;
152
153 #ifdef CONFIG_SYS_TEXT_BASE
154         text_base = CONFIG_SYS_TEXT_BASE;
155 #else
156         text_base = CONFIG_SYS_MONITOR_BASE;
157 #endif
158
159         debug("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
160                 text_base, bss_start, bss_end);
161 #endif
162
163 #ifdef CONFIG_MODEM_SUPPORT
164         debug("Modem Support enabled\n");
165 #endif
166 #ifdef CONFIG_USE_IRQ
167         debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
168         debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
169 #endif
170
171         return 0;
172 }
173
174 static int announce_dram_init(void)
175 {
176         puts("DRAM:  ");
177         return 0;
178 }
179
180 #if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K)
181 static int init_func_ram(void)
182 {
183 #ifdef  CONFIG_BOARD_TYPES
184         int board_type = gd->board_type;
185 #else
186         int board_type = 0;     /* use dummy arg */
187 #endif
188
189         gd->ram_size = initdram(board_type);
190
191         if (gd->ram_size > 0)
192                 return 0;
193
194         puts("*** failed ***\n");
195         return 1;
196 }
197 #endif
198
199 static int show_dram_config(void)
200 {
201         unsigned long long size;
202
203 #ifdef CONFIG_NR_DRAM_BANKS
204         int i;
205
206         debug("\nRAM Configuration:\n");
207         for (i = size = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
208                 size += gd->bd->bi_dram[i].size;
209                 debug("Bank #%d: %llx ", i,
210                       (unsigned long long)(gd->bd->bi_dram[i].start));
211 #ifdef DEBUG
212                 print_size(gd->bd->bi_dram[i].size, "\n");
213 #endif
214         }
215         debug("\nDRAM:  ");
216 #else
217         size = gd->ram_size;
218 #endif
219
220         print_size(size, "");
221         board_add_ram_info(0);
222         putc('\n');
223
224         return 0;
225 }
226
227 __weak void dram_init_banksize(void)
228 {
229 #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE)
230         gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
231         gd->bd->bi_dram[0].size = get_effective_memsize();
232 #endif
233 }
234
235 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
236 static int init_func_i2c(void)
237 {
238         puts("I2C:   ");
239 #ifdef CONFIG_SYS_I2C
240         i2c_init_all();
241 #else
242         i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
243 #endif
244         puts("ready\n");
245         return 0;
246 }
247 #endif
248
249 #if defined(CONFIG_HARD_SPI)
250 static int init_func_spi(void)
251 {
252         puts("SPI:   ");
253         spi_init();
254         puts("ready\n");
255         return 0;
256 }
257 #endif
258
259 __maybe_unused
260 static int zero_global_data(void)
261 {
262         memset((void *)gd, '\0', sizeof(gd_t));
263
264         return 0;
265 }
266
267 static int setup_mon_len(void)
268 {
269 #if defined(__ARM__) || defined(__MICROBLAZE__)
270         gd->mon_len = (ulong)&__bss_end - (ulong)_start;
271 #elif defined(CONFIG_SANDBOX) || defined(CONFIG_EFI_APP)
272         gd->mon_len = (ulong)&_end - (ulong)_init;
273 #elif defined(CONFIG_BLACKFIN) || defined(CONFIG_NIOS2)
274         gd->mon_len = CONFIG_SYS_MONITOR_LEN;
275 #else
276         /* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */
277         gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE;
278 #endif
279         return 0;
280 }
281
282 __weak int arch_cpu_init(void)
283 {
284         return 0;
285 }
286
287 #ifdef CONFIG_SANDBOX
288 static int setup_ram_buf(void)
289 {
290         struct sandbox_state *state = state_get_current();
291
292         gd->arch.ram_buf = state->ram_buf;
293         gd->ram_size = state->ram_size;
294
295         return 0;
296 }
297 #endif
298
299 /* Get the top of usable RAM */
300 __weak ulong board_get_usable_ram_top(ulong total_size)
301 {
302 #ifdef CONFIG_SYS_SDRAM_BASE
303         /*
304          * Detect whether we have so much RAM that it goes past the end of our
305          * 32-bit address space. If so, clip the usable RAM so it doesn't.
306          */
307         if (gd->ram_top < CONFIG_SYS_SDRAM_BASE)
308                 /*
309                  * Will wrap back to top of 32-bit space when reservations
310                  * are made.
311                  */
312                 return 0;
313 #endif
314         return gd->ram_top;
315 }
316
317 static int setup_dest_addr(void)
318 {
319         debug("Monitor len: %08lX\n", gd->mon_len);
320         /*
321          * Ram is setup, size stored in gd !!
322          */
323         debug("Ram size: %08lX\n", (ulong)gd->ram_size);
324 #if defined(CONFIG_SYS_MEM_TOP_HIDE)
325         /*
326          * Subtract specified amount of memory to hide so that it won't
327          * get "touched" at all by U-Boot. By fixing up gd->ram_size
328          * the Linux kernel should now get passed the now "corrected"
329          * memory size and won't touch it either. This should work
330          * for arch/ppc and arch/powerpc. Only Linux board ports in
331          * arch/powerpc with bootwrapper support, that recalculate the
332          * memory size from the SDRAM controller setup will have to
333          * get fixed.
334          */
335         gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
336 #endif
337 #ifdef CONFIG_SYS_SDRAM_BASE
338         gd->ram_top = CONFIG_SYS_SDRAM_BASE;
339 #endif
340         gd->ram_top += get_effective_memsize();
341         gd->ram_top = board_get_usable_ram_top(gd->mon_len);
342         gd->relocaddr = gd->ram_top;
343         debug("Ram top: %08lX\n", (ulong)gd->ram_top);
344 #if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
345         /*
346          * We need to make sure the location we intend to put secondary core
347          * boot code is reserved and not used by any part of u-boot
348          */
349         if (gd->relocaddr > determine_mp_bootpg(NULL)) {
350                 gd->relocaddr = determine_mp_bootpg(NULL);
351                 debug("Reserving MP boot page to %08lx\n", gd->relocaddr);
352         }
353 #endif
354         return 0;
355 }
356
357 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
358 static int reserve_logbuffer(void)
359 {
360         /* reserve kernel log buffer */
361         gd->relocaddr -= LOGBUFF_RESERVE;
362         debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
363                 gd->relocaddr);
364         return 0;
365 }
366 #endif
367
368 #ifdef CONFIG_PRAM
369 /* reserve protected RAM */
370 static int reserve_pram(void)
371 {
372         ulong reg;
373
374         reg = getenv_ulong("pram", 10, CONFIG_PRAM);
375         gd->relocaddr -= (reg << 10);           /* size is in kB */
376         debug("Reserving %ldk for protected RAM at %08lx\n", reg,
377               gd->relocaddr);
378         return 0;
379 }
380 #endif /* CONFIG_PRAM */
381
382 /* Round memory pointer down to next 4 kB limit */
383 static int reserve_round_4k(void)
384 {
385         gd->relocaddr &= ~(4096 - 1);
386         return 0;
387 }
388
389 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
390                 defined(CONFIG_ARM)
391 static int reserve_mmu(void)
392 {
393         /* reserve TLB table */
394         gd->arch.tlb_size = PGTABLE_SIZE;
395         gd->relocaddr -= gd->arch.tlb_size;
396
397         /* round down to next 64 kB limit */
398         gd->relocaddr &= ~(0x10000 - 1);
399
400         gd->arch.tlb_addr = gd->relocaddr;
401         debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr,
402               gd->arch.tlb_addr + gd->arch.tlb_size);
403         return 0;
404 }
405 #endif
406
407 #ifdef CONFIG_LCD
408 static int reserve_lcd(void)
409 {
410 #ifdef CONFIG_FB_ADDR
411         gd->fb_base = CONFIG_FB_ADDR;
412 #else
413         /* reserve memory for LCD display (always full pages) */
414         gd->relocaddr = lcd_setmem(gd->relocaddr);
415         gd->fb_base = gd->relocaddr;
416 #endif /* CONFIG_FB_ADDR */
417         return 0;
418 }
419 #endif /* CONFIG_LCD */
420
421 static int reserve_trace(void)
422 {
423 #ifdef CONFIG_TRACE
424         gd->relocaddr -= CONFIG_TRACE_BUFFER_SIZE;
425         gd->trace_buff = map_sysmem(gd->relocaddr, CONFIG_TRACE_BUFFER_SIZE);
426         debug("Reserving %dk for trace data at: %08lx\n",
427               CONFIG_TRACE_BUFFER_SIZE >> 10, gd->relocaddr);
428 #endif
429
430         return 0;
431 }
432
433 #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \
434                 !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \
435                 !defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K)
436 static int reserve_video(void)
437 {
438         /* reserve memory for video display (always full pages) */
439         gd->relocaddr = video_setmem(gd->relocaddr);
440         gd->fb_base = gd->relocaddr;
441
442         return 0;
443 }
444 #endif
445
446 static int reserve_uboot(void)
447 {
448         /*
449          * reserve memory for U-Boot code, data & bss
450          * round down to next 4 kB limit
451          */
452         gd->relocaddr -= gd->mon_len;
453         gd->relocaddr &= ~(4096 - 1);
454 #ifdef CONFIG_E500
455         /* round down to next 64 kB limit so that IVPR stays aligned */
456         gd->relocaddr &= ~(65536 - 1);
457 #endif
458
459         debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10,
460               gd->relocaddr);
461
462         gd->start_addr_sp = gd->relocaddr;
463
464         return 0;
465 }
466
467 #ifndef CONFIG_SPL_BUILD
468 /* reserve memory for malloc() area */
469 static int reserve_malloc(void)
470 {
471         gd->start_addr_sp = gd->start_addr_sp - TOTAL_MALLOC_LEN;
472         debug("Reserving %dk for malloc() at: %08lx\n",
473                         TOTAL_MALLOC_LEN >> 10, gd->start_addr_sp);
474         return 0;
475 }
476
477 /* (permanently) allocate a Board Info struct */
478 static int reserve_board(void)
479 {
480         if (!gd->bd) {
481                 gd->start_addr_sp -= sizeof(bd_t);
482                 gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
483                 memset(gd->bd, '\0', sizeof(bd_t));
484                 debug("Reserving %zu Bytes for Board Info at: %08lx\n",
485                       sizeof(bd_t), gd->start_addr_sp);
486         }
487         return 0;
488 }
489 #endif
490
491 static int setup_machine(void)
492 {
493 #ifdef CONFIG_MACH_TYPE
494         gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */
495 #endif
496         return 0;
497 }
498
499 static int reserve_global_data(void)
500 {
501         gd->start_addr_sp -= sizeof(gd_t);
502         gd->start_addr_sp &= ~0xf;
503         gd->new_gd = (gd_t *)map_sysmem(gd->start_addr_sp, sizeof(gd_t));
504         debug("Reserving %zu Bytes for Global Data at: %08lx\n",
505                         sizeof(gd_t), gd->start_addr_sp);
506         return 0;
507 }
508
509 static int reserve_fdt(void)
510 {
511         /*
512          * If the device tree is sitting immediately above our image then we
513          * must relocate it. If it is embedded in the data section, then it
514          * will be relocated with other data.
515          */
516         if (gd->fdt_blob) {
517                 gd->fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32);
518
519                 gd->start_addr_sp -= gd->fdt_size;
520                 gd->new_fdt = map_sysmem(gd->start_addr_sp, gd->fdt_size);
521                 debug("Reserving %lu Bytes for FDT at: %08lx\n",
522                       gd->fdt_size, gd->start_addr_sp);
523         }
524
525         return 0;
526 }
527
528 int arch_reserve_stacks(void)
529 {
530         return 0;
531 }
532
533 static int reserve_stacks(void)
534 {
535         /* make stack pointer 16-byte aligned */
536         gd->start_addr_sp -= 16;
537         gd->start_addr_sp &= ~0xf;
538
539         /*
540          * let the architecture-specific code tailor gd->start_addr_sp and
541          * gd->irq_sp
542          */
543         return arch_reserve_stacks();
544 }
545
546 static int display_new_sp(void)
547 {
548         debug("New Stack Pointer is: %08lx\n", gd->start_addr_sp);
549
550         return 0;
551 }
552
553 #if defined(CONFIG_PPC) || defined(CONFIG_M68K)
554 static int setup_board_part1(void)
555 {
556         bd_t *bd = gd->bd;
557
558         /*
559          * Save local variables to board info struct
560          */
561         bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;        /* start of memory */
562         bd->bi_memsize = gd->ram_size;                  /* size in bytes */
563
564 #ifdef CONFIG_SYS_SRAM_BASE
565         bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;        /* start of SRAM */
566         bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;         /* size  of SRAM */
567 #endif
568
569 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \
570                 defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
571         bd->bi_immr_base = CONFIG_SYS_IMMR;     /* base  of IMMR register     */
572 #endif
573 #if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K)
574         bd->bi_mbar_base = CONFIG_SYS_MBAR;     /* base of internal registers */
575 #endif
576 #if defined(CONFIG_MPC83xx)
577         bd->bi_immrbar = CONFIG_SYS_IMMR;
578 #endif
579
580         return 0;
581 }
582
583 static int setup_board_part2(void)
584 {
585         bd_t *bd = gd->bd;
586
587         bd->bi_intfreq = gd->cpu_clk;   /* Internal Freq, in Hz */
588         bd->bi_busfreq = gd->bus_clk;   /* Bus Freq,      in Hz */
589 #if defined(CONFIG_CPM2)
590         bd->bi_cpmfreq = gd->arch.cpm_clk;
591         bd->bi_brgfreq = gd->arch.brg_clk;
592         bd->bi_sccfreq = gd->arch.scc_clk;
593         bd->bi_vco = gd->arch.vco_out;
594 #endif /* CONFIG_CPM2 */
595 #if defined(CONFIG_MPC512X)
596         bd->bi_ipsfreq = gd->arch.ips_clk;
597 #endif /* CONFIG_MPC512X */
598 #if defined(CONFIG_MPC5xxx)
599         bd->bi_ipbfreq = gd->arch.ipb_clk;
600         bd->bi_pcifreq = gd->pci_clk;
601 #endif /* CONFIG_MPC5xxx */
602 #if defined(CONFIG_M68K) && defined(CONFIG_PCI)
603         bd->bi_pcifreq = gd->pci_clk;
604 #endif
605 #if defined(CONFIG_EXTRA_CLOCK)
606         bd->bi_inpfreq = gd->arch.inp_clk;      /* input Freq in Hz */
607         bd->bi_vcofreq = gd->arch.vco_clk;      /* vco Freq in Hz */
608         bd->bi_flbfreq = gd->arch.flb_clk;      /* flexbus Freq in Hz */
609 #endif
610
611         return 0;
612 }
613 #endif
614
615 #ifdef CONFIG_SYS_EXTBDINFO
616 static int setup_board_extra(void)
617 {
618         bd_t *bd = gd->bd;
619
620         strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version));
621         strncpy((char *) bd->bi_r_version, U_BOOT_VERSION,
622                 sizeof(bd->bi_r_version));
623
624         bd->bi_procfreq = gd->cpu_clk;  /* Processor Speed, In Hz */
625         bd->bi_plb_busfreq = gd->bus_clk;
626 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
627                 defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
628                 defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
629         bd->bi_pci_busfreq = get_PCI_freq();
630         bd->bi_opbfreq = get_OPB_freq();
631 #elif defined(CONFIG_XILINX_405)
632         bd->bi_pci_busfreq = get_PCI_freq();
633 #endif
634
635         return 0;
636 }
637 #endif
638
639 #ifdef CONFIG_POST
640 static int init_post(void)
641 {
642         post_bootmode_init();
643         post_run(NULL, POST_ROM | post_bootmode_get(0));
644
645         return 0;
646 }
647 #endif
648
649 static int setup_dram_config(void)
650 {
651         /* Ram is board specific, so move it to board code ... */
652         dram_init_banksize();
653
654         return 0;
655 }
656
657 static int reloc_fdt(void)
658 {
659         if (gd->flags & GD_FLG_SKIP_RELOC)
660                 return 0;
661         if (gd->new_fdt) {
662                 memcpy(gd->new_fdt, gd->fdt_blob, gd->fdt_size);
663                 gd->fdt_blob = gd->new_fdt;
664         }
665
666         return 0;
667 }
668
669 static int setup_reloc(void)
670 {
671         if (gd->flags & GD_FLG_SKIP_RELOC) {
672                 debug("Skipping relocation due to flag\n");
673                 return 0;
674         }
675
676 #ifdef CONFIG_SYS_TEXT_BASE
677         gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE;
678 #ifdef CONFIG_M68K
679         /*
680          * On all ColdFire arch cpu, monitor code starts always
681          * just after the default vector table location, so at 0x400
682          */
683         gd->reloc_off = gd->relocaddr - (CONFIG_SYS_TEXT_BASE + 0x400);
684 #endif
685 #endif
686         memcpy(gd->new_gd, (char *)gd, sizeof(gd_t));
687
688         debug("Relocation Offset is: %08lx\n", gd->reloc_off);
689         debug("Relocating to %08lx, new gd at %08lx, sp at %08lx\n",
690               gd->relocaddr, (ulong)map_to_sysmem(gd->new_gd),
691               gd->start_addr_sp);
692
693         return 0;
694 }
695
696 /* ARM calls relocate_code from its crt0.S */
697 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
698
699 static int jump_to_copy(void)
700 {
701         if (gd->flags & GD_FLG_SKIP_RELOC)
702                 return 0;
703         /*
704          * x86 is special, but in a nice way. It uses a trampoline which
705          * enables the dcache if possible.
706          *
707          * For now, other archs use relocate_code(), which is implemented
708          * similarly for all archs. When we do generic relocation, hopefully
709          * we can make all archs enable the dcache prior to relocation.
710          */
711 #if defined(CONFIG_X86) || defined(CONFIG_ARC)
712         /*
713          * SDRAM and console are now initialised. The final stack can now
714          * be setup in SDRAM. Code execution will continue in Flash, but
715          * with the stack in SDRAM and Global Data in temporary memory
716          * (CPU cache)
717          */
718         arch_setup_gd(gd->new_gd);
719         board_init_f_r_trampoline(gd->start_addr_sp);
720 #else
721         relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr);
722 #endif
723
724         return 0;
725 }
726 #endif
727
728 /* Record the board_init_f() bootstage (after arch_cpu_init()) */
729 static int mark_bootstage(void)
730 {
731         bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
732
733         return 0;
734 }
735
736 static int initf_dm(void)
737 {
738 #if defined(CONFIG_DM) && defined(CONFIG_SYS_MALLOC_F_LEN)
739         int ret;
740
741         ret = dm_init_and_scan(true);
742         if (ret)
743                 return ret;
744 #endif
745
746         return 0;
747 }
748
749 /* Architecture-specific memory reservation */
750 __weak int reserve_arch(void)
751 {
752         return 0;
753 }
754
755 __weak int arch_cpu_init_dm(void)
756 {
757         return 0;
758 }
759
760 static init_fnc_t init_sequence_f[] = {
761 #ifdef CONFIG_SANDBOX
762         setup_ram_buf,
763 #endif
764         setup_mon_len,
765 #ifdef CONFIG_OF_CONTROL
766         fdtdec_setup,
767 #endif
768 #if defined(CONFIG_X86) && defined(CONFIG_HAVE_FSP)
769         x86_fsp_init,
770 #endif
771 #ifdef CONFIG_TRACE
772         trace_early_init,
773 #endif
774         initf_malloc,
775 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
776         /* TODO: can this go into arch_cpu_init()? */
777         probecpu,
778 #endif
779         arch_cpu_init,          /* basic arch cpu dependent setup */
780         mark_bootstage,
781         initf_dm,
782         arch_cpu_init_dm,
783 #if defined(CONFIG_BOARD_EARLY_INIT_F)
784         board_early_init_f,
785 #endif
786         /* TODO: can any of this go into arch_cpu_init()? */
787 #if defined(CONFIG_PPC) && !defined(CONFIG_8xx_CPUCLK_DEFAULT)
788         get_clocks,             /* get CPU and bus clocks (etc.) */
789 #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
790                 && !defined(CONFIG_TQM885D)
791         adjust_sdram_tbs_8xx,
792 #endif
793         /* TODO: can we rename this to timer_init()? */
794         init_timebase,
795 #endif
796 #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_BLACKFIN)
797         timer_init,             /* initialize timer */
798 #endif
799 #ifdef CONFIG_SYS_ALLOC_DPRAM
800 #if !defined(CONFIG_CPM2)
801         dpram_init,
802 #endif
803 #endif
804 #if defined(CONFIG_BOARD_POSTCLK_INIT)
805         board_postclk_init,
806 #endif
807 #ifdef CONFIG_FSL_ESDHC
808         get_clocks,
809 #endif
810 #ifdef CONFIG_M68K
811         get_clocks,
812 #endif
813         env_init,               /* initialize environment */
814 #if defined(CONFIG_8xx_CPUCLK_DEFAULT)
815         /* get CPU and bus clocks according to the environment variable */
816         get_clocks_866,
817         /* adjust sdram refresh rate according to the new clock */
818         sdram_adjust_866,
819         init_timebase,
820 #endif
821         init_baud_rate,         /* initialze baudrate settings */
822         serial_init,            /* serial communications setup */
823         console_init_f,         /* stage 1 init of console */
824 #ifdef CONFIG_SANDBOX
825         sandbox_early_getopt_check,
826 #endif
827 #ifdef CONFIG_OF_CONTROL
828         fdtdec_prepare_fdt,
829 #endif
830         display_options,        /* say that we are here */
831         display_text_info,      /* show debugging info if required */
832 #if defined(CONFIG_MPC8260)
833         prt_8260_rsr,
834         prt_8260_clks,
835 #endif /* CONFIG_MPC8260 */
836 #if defined(CONFIG_MPC83xx)
837         prt_83xx_rsr,
838 #endif
839 #if defined(CONFIG_PPC) || defined(CONFIG_M68K)
840         checkcpu,
841 #endif
842         print_cpuinfo,          /* display cpu info (and speed) */
843 #if defined(CONFIG_MPC5xxx)
844         prt_mpc5xxx_clks,
845 #endif /* CONFIG_MPC5xxx */
846 #if defined(CONFIG_DISPLAY_BOARDINFO)
847         show_board_info,
848 #endif
849         INIT_FUNC_WATCHDOG_INIT
850 #if defined(CONFIG_MISC_INIT_F)
851         misc_init_f,
852 #endif
853         INIT_FUNC_WATCHDOG_RESET
854 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
855         init_func_i2c,
856 #endif
857 #if defined(CONFIG_HARD_SPI)
858         init_func_spi,
859 #endif
860         announce_dram_init,
861         /* TODO: unify all these dram functions? */
862 #if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32)
863         dram_init,              /* configure available RAM banks */
864 #endif
865 #if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K)
866         init_func_ram,
867 #endif
868 #ifdef CONFIG_POST
869         post_init_f,
870 #endif
871         INIT_FUNC_WATCHDOG_RESET
872 #if defined(CONFIG_SYS_DRAM_TEST)
873         testdram,
874 #endif /* CONFIG_SYS_DRAM_TEST */
875         INIT_FUNC_WATCHDOG_RESET
876
877 #ifdef CONFIG_POST
878         init_post,
879 #endif
880         INIT_FUNC_WATCHDOG_RESET
881         /*
882          * Now that we have DRAM mapped and working, we can
883          * relocate the code and continue running from DRAM.
884          *
885          * Reserve memory at end of RAM for (top down in that order):
886          *  - area that won't get touched by U-Boot and Linux (optional)
887          *  - kernel log buffer
888          *  - protected RAM
889          *  - LCD framebuffer
890          *  - monitor code
891          *  - board info struct
892          */
893         setup_dest_addr,
894 #if defined(CONFIG_BLACKFIN) || defined(CONFIG_NIOS2)
895         /* Blackfin u-boot monitor should be on top of the ram */
896         reserve_uboot,
897 #endif
898 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
899         reserve_logbuffer,
900 #endif
901 #ifdef CONFIG_PRAM
902         reserve_pram,
903 #endif
904         reserve_round_4k,
905 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
906                 defined(CONFIG_ARM)
907         reserve_mmu,
908 #endif
909 #ifdef CONFIG_LCD
910         reserve_lcd,
911 #endif
912         reserve_trace,
913         /* TODO: Why the dependency on CONFIG_8xx? */
914 #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \
915                 !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \
916                 !defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K)
917         reserve_video,
918 #endif
919 #if !defined(CONFIG_BLACKFIN) && !defined(CONFIG_NIOS2)
920         reserve_uboot,
921 #endif
922 #ifndef CONFIG_SPL_BUILD
923         reserve_malloc,
924         reserve_board,
925 #endif
926         setup_machine,
927         reserve_global_data,
928         reserve_fdt,
929         reserve_arch,
930         reserve_stacks,
931         setup_dram_config,
932         show_dram_config,
933 #if defined(CONFIG_PPC) || defined(CONFIG_M68K)
934         setup_board_part1,
935         INIT_FUNC_WATCHDOG_RESET
936         setup_board_part2,
937 #endif
938         display_new_sp,
939 #ifdef CONFIG_SYS_EXTBDINFO
940         setup_board_extra,
941 #endif
942         INIT_FUNC_WATCHDOG_RESET
943         reloc_fdt,
944         setup_reloc,
945 #if defined(CONFIG_X86) || defined(CONFIG_ARC)
946         copy_uboot_to_ram,
947         clear_bss,
948         do_elf_reloc_fixups,
949 #endif
950 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
951         jump_to_copy,
952 #endif
953         NULL,
954 };
955
956 void board_init_f(ulong boot_flags)
957 {
958 #ifdef CONFIG_SYS_GENERIC_GLOBAL_DATA
959         /*
960          * For some archtectures, global data is initialized and used before
961          * calling this function. The data should be preserved. For others,
962          * CONFIG_SYS_GENERIC_GLOBAL_DATA should be defined and use the stack
963          * here to host global data until relocation.
964          */
965         gd_t data;
966
967         gd = &data;
968
969         /*
970          * Clear global data before it is accessed at debug print
971          * in initcall_run_list. Otherwise the debug print probably
972          * get the wrong vaule of gd->have_console.
973          */
974         zero_global_data();
975 #endif
976
977         gd->flags = boot_flags;
978         gd->have_console = 0;
979
980         if (initcall_run_list(init_sequence_f))
981                 hang();
982
983 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \
984                 !defined(CONFIG_EFI_APP)
985         /* NOTREACHED - jump_to_copy() does not return */
986         hang();
987 #endif
988 }
989
990 #if defined(CONFIG_X86) || defined(CONFIG_ARC)
991 /*
992  * For now this code is only used on x86.
993  *
994  * init_sequence_f_r is the list of init functions which are run when
995  * U-Boot is executing from Flash with a semi-limited 'C' environment.
996  * The following limitations must be considered when implementing an
997  * '_f_r' function:
998  *  - 'static' variables are read-only
999  *  - Global Data (gd->xxx) is read/write
1000  *
1001  * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if
1002  * supported).  It _should_, if possible, copy global data to RAM and
1003  * initialise the CPU caches (to speed up the relocation process)
1004  *
1005  * NOTE: At present only x86 uses this route, but it is intended that
1006  * all archs will move to this when generic relocation is implemented.
1007  */
1008 static init_fnc_t init_sequence_f_r[] = {
1009         init_cache_f_r,
1010
1011         NULL,
1012 };
1013
1014 void board_init_f_r(void)
1015 {
1016         if (initcall_run_list(init_sequence_f_r))
1017                 hang();
1018
1019         /*
1020          * U-Boot has been copied into SDRAM, the BSS has been cleared etc.
1021          * Transfer execution from Flash to RAM by calculating the address
1022          * of the in-RAM copy of board_init_r() and calling it
1023          */
1024         (board_init_r + gd->reloc_off)((gd_t *)gd, gd->relocaddr);
1025
1026         /* NOTREACHED - board_init_r() does not return */
1027         hang();
1028 }
1029 #endif /* CONFIG_X86 */
1030
1031 /* Unfortunately x86 can't compile this code as gd cannot be assigned */
1032 #ifndef CONFIG_X86
1033 __weak void arch_setup_gd(struct global_data *gd_ptr)
1034 {
1035         gd = gd_ptr;
1036 }
1037 #endif /* !CONFIG_X86 */
1038
1039 ulong board_init_f_mem(ulong top)
1040 {
1041         struct global_data *gd_ptr;
1042
1043         /* Leave space for the stack we are running with now */
1044         top -= 0x40;
1045
1046         top -= sizeof(struct global_data);
1047         top = ALIGN(top, 16);
1048         gd_ptr = (struct global_data *)top;
1049         memset(gd_ptr, '\0', sizeof(*gd));
1050         arch_setup_gd(gd_ptr);
1051
1052 #ifdef CONFIG_SYS_MALLOC_F_LEN
1053         top -= CONFIG_SYS_MALLOC_F_LEN;
1054         gd->malloc_base = top;
1055 #endif
1056
1057         return top;
1058 }