4 bool "Boot timing and reporting"
6 Enable recording of boot time while booting. To use it, insert
7 calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
8 bootstage.h. Only a single entry is recorded for each ID. You can
9 give the entry a name with bootstage_mark_name(). You can also
10 record elapsed time in a particular stage using bootstage_start()
11 before starting and bootstage_accum() when finished. Bootstage will
12 add up all the accumulated time and report it.
14 Normally, IDs are defined in bootstage.h but a small number of
15 additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC
18 Calls to show_boot_progress() will also result in log entries but
19 these will not have names.
22 bool "Boot timing and reported in SPL"
25 Enable recording of boot time in SPL. To make this visible to U-Boot
26 proper, enable BOOTSTAGE_STASH as well. This will stash the timing
27 information when SPL finishes and load it when U-Boot proper starts
30 config BOOTSTAGE_REPORT
31 bool "Display a detailed boot timing report before booting the OS"
34 Enable output of a boot time report just before the OS is booted.
35 This shows how long it took U-Boot to go through each stage of the
36 boot process. The report looks something like this:
38 Timer summary in microseconds:
41 3,575,678 3,575,678 board_init_f start
42 3,575,695 17 arch_cpu_init A9
43 3,575,777 82 arch_cpu_init done
44 3,659,598 83,821 board_init_r start
45 3,910,375 250,777 main_loop
46 29,916,167 26,005,792 bootm_start
47 30,361,327 445,160 start_kernel
49 config BOOTSTAGE_USER_COUNT
50 int "Number of boot ID numbers available for user use"
53 This is the number of available user bootstage records.
54 Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
55 a new ID will be allocated from this stash. If you exceed
56 the limit, recording will stop.
58 config BOOTSTAGE_RECORD_COUNT
59 int "Number of boot stage records to store"
62 This is the size of the bootstage record list and is the maximum
63 number of bootstage records that can be recorded.
66 bool "Store boot timing information in the OS device tree"
69 Stash the bootstage information in the FDT. A root 'bootstage'
70 node is created with each bootstage id as a child. Each child
71 has a 'name' property and either 'mark' containing the
72 mark time in microseconds, or 'accum' containing the
73 accumulated time for that bootstage id in microseconds.
78 name = "board_init_f";
87 Code in the Linux kernel can find this in /proc/devicetree.
89 config BOOTSTAGE_STASH
90 bool "Stash the boot timing information in memory before booting OS"
93 Some OSes do not support device tree. Bootstage can instead write
94 the boot timing information in a binary format at a given address.
95 This happens through a call to bootstage_stash(), typically in
96 the CPU's cleanup_before_linux() function. You can use the
97 'bootstage stash' and 'bootstage unstash' commands to do this on
100 config BOOTSTAGE_STASH_ADDR
101 hex "Address to stash boot timing information"
104 Provide an address which will not be overwritten by the OS when it
105 starts, so that it can read this information when ready.
107 config BOOTSTAGE_STASH_SIZE
108 hex "Size of boot timing stash region"
111 This should be large enough to hold the bootstage stash. A value of
112 4096 (4KiB) is normally plenty.
119 bool "Support for booting from NOR flash"
122 Enabling this will make a U-Boot binary that is capable of being
123 booted via NOR. In this case we will enable certain pinmux early
124 as the ROM only partially sets up pinmux. We also default to using
128 bool "Support for booting from NAND flash"
131 Enabling this will make a U-Boot binary that is capable of being
132 booted via NAND flash. This is not a must, some SoCs need this,
136 bool "Support for booting from ONENAND"
139 Enabling this will make a U-Boot binary that is capable of being
140 booted via ONENAND. This is not a must, some SoCs need this,
144 bool "Support for booting from QSPI flash"
147 Enabling this will make a U-Boot binary that is capable of being
148 booted via QSPI flash. This is not a must, some SoCs need this,
152 bool "Support for booting from SATA"
155 Enabling this will make a U-Boot binary that is capable of being
156 booted via SATA. This is not a must, some SoCs need this,
160 bool "Support for booting from SD/EMMC"
163 Enabling this will make a U-Boot binary that is capable of being
164 booted via SD/EMMC. This is not a must, some SoCs need this,
168 bool "Support for booting from SPI flash"
171 Enabling this will make a U-Boot binary that is capable of being
172 booted via SPI flash. This is not a must, some SoCs need this,
179 config ENV_IS_IN_FLASH
180 bool "Environment in flash memory"
181 depends on !CHAIN_OF_TRUST
183 Define this if you have a flash device which you want to use for the
186 a) The environment occupies one whole flash sector, which is
187 "embedded" in the text segment with the U-Boot code. This
188 happens usually with "bottom boot sector" or "top boot
189 sector" type flash chips, which have several smaller
190 sectors at the start or the end. For instance, such a
191 layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
192 such a case you would place the environment in one of the
193 4 kB sectors - with U-Boot code before and after it. With
194 "top boot sector" type flash chips, you would put the
195 environment in one of the last sectors, leaving a gap
196 between U-Boot and the environment.
200 Offset of environment data (variable area) to the
201 beginning of flash memory; for instance, with bottom boot
202 type flash chips the second sector can be used: the offset
203 for this sector is given here.
205 CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
209 This is just another way to specify the start address of
210 the flash sector containing the environment (instead of
213 CONFIG_ENV_SECT_SIZE:
215 Size of the sector containing the environment.
218 b) Sometimes flash chips have few, equal sized, BIG sectors.
219 In such a case you don't want to spend a whole sector for
224 If you use this in combination with CONFIG_ENV_IS_IN_FLASH
225 and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
226 of this flash sector for the environment. This saves
227 memory for the RAM copy of the environment.
229 It may also save flash memory if you decide to use this
230 when your environment is "embedded" within U-Boot code,
231 since then the remainder of the flash sector could be used
232 for U-Boot code. It should be pointed out that this is
233 STRONGLY DISCOURAGED from a robustness point of view:
234 updating the environment in flash makes it always
235 necessary to erase the WHOLE sector. If something goes
236 wrong before the contents has been restored from a copy in
237 RAM, your target system will be dead.
239 CONFIG_ENV_ADDR_REDUND
240 CONFIG_ENV_SIZE_REDUND
242 These settings describe a second storage area used to hold
243 a redundant copy of the environment data, so that there is
244 a valid backup copy in case there is a power failure during
245 a "saveenv" operation.
247 BE CAREFUL! Any changes to the flash layout, and some changes to the
248 source code will make it necessary to adapt <board>/u-boot.lds*
252 bool "Environment in an MMC device"
253 depends on !CHAIN_OF_TRUST
254 default y if ARCH_SUNXI
256 Define this if you have an MMC device which you want to use for the
259 CONFIG_SYS_MMC_ENV_DEV:
261 Specifies which MMC device the environment is stored in.
263 CONFIG_SYS_MMC_ENV_PART (optional):
265 Specifies which MMC partition the environment is stored in. If not
266 set, defaults to partition 0, the user area. Common values might be
267 1 (first MMC boot partition), 2 (second MMC boot partition).
272 These two #defines specify the offset and size of the environment
273 area within the specified MMC device.
275 If offset is positive (the usual case), it is treated as relative to
276 the start of the MMC partition. If offset is negative, it is treated
277 as relative to the end of the MMC partition. This can be useful if
278 your board may be fitted with different MMC devices, which have
279 different sizes for the MMC partitions, and you always want the
280 environment placed at the very end of the partition, to leave the
281 maximum possible space before it, to store other data.
283 These two values are in units of bytes, but must be aligned to an
286 CONFIG_ENV_OFFSET_REDUND (optional):
288 Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
289 hold a redundant copy of the environment data. This provides a
290 valid backup copy in case the other copy is corrupted, e.g. due
291 to a power failure during a "saveenv" operation.
293 This value may also be positive or negative; this is handled in the
294 same way as CONFIG_ENV_OFFSET.
296 This value is also in units of bytes, but must also be aligned to
297 an MMC sector boundary.
299 CONFIG_ENV_SIZE_REDUND (optional):
301 This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
302 set. If this value is set, it must be set to the same value as
305 config ENV_IS_IN_NAND
306 bool "Environment in a NAND device"
307 depends on !CHAIN_OF_TRUST
309 Define this if you have a NAND device which you want to use for the
315 These two #defines specify the offset and size of the environment
316 area within the first NAND device. CONFIG_ENV_OFFSET must be
317 aligned to an erase block boundary.
319 - CONFIG_ENV_OFFSET_REDUND (optional):
321 This setting describes a second storage area of CONFIG_ENV_SIZE
322 size used to hold a redundant copy of the environment data, so
323 that there is a valid backup copy in case there is a power failure
324 during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
325 aligned to an erase block boundary.
327 - CONFIG_ENV_RANGE (optional):
329 Specifies the length of the region in which the environment
330 can be written. This should be a multiple of the NAND device's
331 block size. Specifying a range with more erase blocks than
332 are needed to hold CONFIG_ENV_SIZE allows bad blocks within
333 the range to be avoided.
335 - CONFIG_ENV_OFFSET_OOB (optional):
337 Enables support for dynamically retrieving the offset of the
338 environment from block zero's out-of-band data. The
339 "nand env.oob" command can be used to record this offset.
340 Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
341 using CONFIG_ENV_OFFSET_OOB.
344 bool "Environment in a UBI volume"
345 depends on !CHAIN_OF_TRUST
347 Define this if you have an UBI volume that you want to use for the
348 environment. This has the benefit of wear-leveling the environment
349 accesses, which is important on NAND.
351 - CONFIG_ENV_UBI_PART:
353 Define this to a string that is the mtd partition containing the UBI.
355 - CONFIG_ENV_UBI_VOLUME:
357 Define this to the name of the volume that you want to store the
360 - CONFIG_ENV_UBI_VOLUME_REDUND:
362 Define this to the name of another volume to store a second copy of
363 the environment in. This will enable redundant environments in UBI.
364 It is assumed that both volumes are in the same MTD partition.
366 - CONFIG_UBI_SILENCE_MSG
367 - CONFIG_UBIFS_SILENCE_MSG
369 You will probably want to define these to avoid a really noisy system
370 when storing the env in UBI.
372 config ENV_IS_NOWHERE
373 bool "Environment is not stored"
375 Define this if you don't want to or can't have an environment stored
381 hex "Environment Offset"
382 depends on !ENV_IS_IN_UBI
383 depends on !ENV_IS_NOWHERE
384 default 0x88000 if ARCH_SUNXI
386 Offset from the start of the device (or partition)
389 hex "Environment Size"
390 depends on !ENV_IS_NOWHERE
391 default 0x20000 if ARCH_SUNXI
393 Size of the environment storage area
396 string "UBI partition name"
397 depends on ENV_IS_IN_UBI
399 MTD partition containing the UBI device
401 config ENV_UBI_VOLUME
402 string "UBI volume name"
403 depends on ENV_IS_IN_UBI
405 Name of the volume that you want to store the environment in.
412 int "delay in seconds before automatically booting"
416 Delay before automatically running bootcmd;
417 set to 0 to autoboot with no delay, but you can stop it by key input.
418 set to -1 to disable autoboot.
419 set to -2 to autoboot with no delay and not check for abort
421 See doc/README.autoboot for details.
428 This is the library functionality to provide a text-based menu of
429 choices for the user to make choices with.
431 config CONSOLE_RECORD
432 bool "Console recording"
434 This provides a way to record console output (and provide console
435 input) through circular buffers. This is mostly useful for testing.
436 Console output is recorded even when the console is silent.
437 To enable console recording, call console_record_reset_enable()
440 config CONSOLE_RECORD_OUT_SIZE
441 hex "Output buffer size"
442 depends on CONSOLE_RECORD
443 default 0x400 if CONSOLE_RECORD
445 Set the size of the console output buffer. When this fills up, no
446 more data will be recorded until some is removed. The buffer is
447 allocated immediately after the malloc() region is ready.
449 config CONSOLE_RECORD_IN_SIZE
450 hex "Input buffer size"
451 depends on CONSOLE_RECORD
452 default 0x100 if CONSOLE_RECORD
454 Set the size of the console input buffer. When this contains data,
455 tstc() and getc() will use this in preference to real device input.
456 The buffer is allocated immediately after the malloc() region is
460 string "Board specific string to be added to uboot version string"
462 This options adds the board specific name to u-boot version.
464 config SILENT_CONSOLE
465 bool "Support a silent console"
467 This option allows the console to be silenced, meaning that no
468 output will appear on the console devices. This is controlled by
469 setting the environment vaariable 'silent' to a non-empty value.
470 Note this also silences the console when booting Linux.
472 When the console is set up, the variable is checked, and the
473 GD_FLG_SILENT flag is set. Changing the environment variable later
474 will update the flag.
476 config SILENT_U_BOOT_ONLY
477 bool "Only silence the U-Boot console"
478 depends on SILENT_CONSOLE
480 Normally when the U-Boot console is silenced, Linux's console is
481 also silenced (assuming the board boots into Linux). This option
482 allows the linux console to operate normally, even if U-Boot's
485 config SILENT_CONSOLE_UPDATE_ON_SET
486 bool "Changes to the 'silent' environment variable update immediately"
487 depends on SILENT_CONSOLE
488 default y if SILENT_CONSOLE
490 When the 'silent' environment variable is changed, update the
491 console silence flag immediately. This allows 'setenv' to be used
492 to silence or un-silence the console.
494 The effect is that any change to the variable will affect the
497 config SILENT_CONSOLE_UPDATE_ON_RELOC
498 bool "Allow flags to take effect on relocation"
499 depends on SILENT_CONSOLE
501 In some cases the environment is not available until relocation
502 (e.g. NAND). This option makes the value of the 'silent'
503 environment variable take effect at relocation.
505 config PRE_CONSOLE_BUFFER
506 bool "Buffer characters before the console is available"
508 Prior to the console being initialised (i.e. serial UART
509 initialised etc) all console output is silently discarded.
510 Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
511 buffer any console messages prior to the console being
512 initialised to a buffer. The buffer is a circular buffer, so
513 if it overflows, earlier output is discarded.
515 Note that this is not currently supported in SPL. It would be
516 useful to be able to share the pre-console buffer with SPL.
518 config PRE_CON_BUF_SZ
519 int "Sets the size of the pre-console buffer"
520 depends on PRE_CONSOLE_BUFFER
523 The size of the pre-console buffer affects how much console output
524 can be held before it overflows and starts discarding earlier
525 output. Normally there is very little output at this early stage,
526 unless debugging is enabled, so allow enough for ~10 lines of
529 This is a useful feature if you are using a video console and
530 want to see the full boot output on the console. Without this
531 option only the post-relocation output will be displayed.
533 config PRE_CON_BUF_ADDR
534 hex "Address of the pre-console buffer"
535 depends on PRE_CONSOLE_BUFFER
536 default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
537 default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
539 This sets the start address of the pre-console buffer. This must
540 be in available memory and is accessed before relocation and
541 possibly before DRAM is set up. Therefore choose an address
544 We should consider removing this option and allocating the memory
545 in board_init_f_init_reserve() instead.
548 bool "Enable console multiplexing"
549 default y if DM_VIDEO || VIDEO || LCD
551 This allows multiple devices to be used for each console 'file'.
552 For example, stdout can be set to go to serial and video.
553 Similarly, stdin can be set to come from serial and keyboard.
554 Input can be provided from either source. Console multiplexing
555 adds a small amount of size to U-Boot. Changes to the environment
556 variables stdout, stdin and stderr will take effect immediately.
558 config SYS_CONSOLE_IS_IN_ENV
559 bool "Select console devices from the environment"
560 default y if CONSOLE_MUX
562 This allows multiple input/output devices to be set at boot time.
563 For example, if stdout is set to "serial,video" then output will
564 be sent to both the serial and video devices on boot. The
565 environment variables can be updated after boot to change the
566 input/output devices.
568 config SYS_CONSOLE_OVERWRITE_ROUTINE
569 bool "Allow board control over console overwriting"
571 If this is enabled, and the board-specific function
572 overwrite_console() returns 1, the stdin, stderr and stdout are
573 switched to the serial port, else the settings in the environment
574 are used. If this is not enabled, the console will not be switched
577 config SYS_CONSOLE_ENV_OVERWRITE
578 bool "Update environment variables during console init"
580 The console environment variables (stdout, stdin, stderr) can be
581 used to determine the correct console devices on start-up. This
582 option writes the console devices to these variables on console
583 start-up (after relocation). This causes the environment to be
584 updated to match the console devices actually chosen.
586 config SYS_CONSOLE_INFO_QUIET
587 bool "Don't display the console devices on boot"
589 Normally U-Boot displays the current settings for stdout, stdin
590 and stderr on boot when the post-relocation console is set up.
591 Enable this option to supress this output. It can be obtained by
592 calling stdio_print_current_devices() from board code.
594 config SYS_STDIO_DEREGISTER
595 bool "Allow deregistering stdio devices"
596 default y if USB_KEYBOARD
598 Generally there is no need to deregister stdio devices since they
599 are never deactivated. But if a stdio device is used which can be
600 removed (for example a USB keyboard) then this option can be
601 enabled to ensure this is handled correctly.
606 bool "Support swapping dtbs at a later point in boot"
609 It is possible during initial boot you may need to use a generic
610 dtb until you can fully determine the board your running on. This
611 config allows boards to implement a function at a later point
612 during boot to switch to the "correct" dtb.
615 bool "Support a FIT image embedded in the U-boot image"
617 This option provides hooks to allow U-boot to parse an
618 appended FIT image and enable board specific code to then select
619 the correct DTB to be used.
621 config DEFAULT_FDT_FILE
622 string "Default fdt file"
624 This option is used to set the default fdt file to boot OS.
626 config VERSION_VARIABLE
627 bool "add U-Boot environment variable vers"
630 If this variable is defined, an environment variable
631 named "ver" is created by U-Boot showing the U-Boot
632 version as printed by the "version" command.
633 Any change to this variable will be reverted at the
636 config BOARD_LATE_INIT
639 Sometimes board require some initialization code that might
640 require once the actual init done, example saving board specific env,
641 boot-modes etc. which eventually done at late.
643 So this config enable the late init code with the help of board_late_init
644 function which should defined on respective boards.
646 config DISPLAY_CPUINFO
647 bool "Display information about the CPU during start up"
648 default y if ARM || NIOS2 || X86 || XTENSA
650 Display information about the CPU that U-Boot is running on
651 when U-Boot starts up. The function print_cpuinfo() is called
654 config DISPLAY_BOARDINFO
655 bool "Display information about the board during start up"
656 default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
658 Display information about the board that U-Boot is running on
659 when U-Boot starts up. The board function checkboard() is called
662 menu "Start-up hooks"
664 config ARCH_EARLY_INIT_R
665 bool "Call arch-specific init soon after relocation"
668 With this option U-Boot will call arch_early_init_r() soon after
669 relocation. Driver model is running by this point, and the cache
670 is on. Note that board_early_init_r() is called first, if
671 enabled. This can be used to set up architecture-specific devices.
673 config ARCH_MISC_INIT
674 bool "Call arch-specific init after relocation, when console is ready"
676 With this option U-Boot will call arch_misc_init() after
677 relocation to allow miscellaneous arch-dependent initialisation
678 to be performed. This function should be defined by the board
679 and will be called after the console is set up, after relocaiton.
681 config BOARD_EARLY_INIT_F
682 bool "Call board-specific init before relocation"
685 Some boards need to perform initialisation as soon as possible
686 after boot. With this option, U-Boot calls board_early_init_f()
687 after driver model is ready in the pre-relocation init sequence.
688 Note that the normal serial console is not yet set up, but the
689 debug UART will be available if enabled.
693 menu "Security support"
696 bool # "Support hashing API (SHA1, SHA256, etc.)"
698 This provides a way to hash data in memory using various supported
699 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
700 and the algorithms it supports are defined in common/hash.c. See
701 also CMD_HASH for command-line access.
705 source "common/spl/Kconfig"