cmd/eeprom.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2000, 2001
   4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5  */
   6
   7 /*
   8  * Support for read and write access to EEPROM like memory devices. This
   9  * includes regular EEPROM as well as  FRAM (ferroelectic nonvolaile RAM).
  10  * FRAM devices read and write data at bus speed. In particular, there is no
  11  * write delay. Also, there is no limit imposed on the number of bytes that can
  12  * be transferred with a single read or write.
  13  *
  14  * Use the following configuration options to ensure no unneeded performance
  15  * degradation (typical for EEPROM) is incured for FRAM memory:
  16  *
  17  * #define CONFIG_SYS_I2C_FRAM
  18  * #undef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  19  *
  20  */
  21
  22 #include <common.h>
  23 #include <config.h>
  24 #include <command.h>
  25 #include <eeprom.h>
  26 #include <i2c.h>
  27 #include <eeprom_layout.h>
  28 #include <linux/delay.h>
  29
  30 #ifndef CONFIG_SYS_I2C_SPEED
  31 #define CONFIG_SYS_I2C_SPEED    50000
  32 #endif
  33
  34 #ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  35 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   0
  36 #endif
  37
  38 #ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_BITS
  39 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       8
  40 #endif
  41
  42 #ifndef I2C_RXTX_LEN
  43 #define I2C_RXTX_LEN    128
  44 #endif
  45
  46 #define EEPROM_PAGE_SIZE        (1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
  47 #define EEPROM_PAGE_OFFSET(x)   ((x) & (EEPROM_PAGE_SIZE - 1))
  48
  49 /*
  50  * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
  51  *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
  52  *
  53  * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  54  *   0x00000nxx for EEPROM address selectors and page number at n.
  55  */
  56 #if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
  57 #if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
  58         (CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
  59         (CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2)
  60 #error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
  61 #endif
  62 #endif
  63
  64 #if defined(CONFIG_DM_I2C)
  65 static int eeprom_i2c_bus;
  66 #endif
  67
  68 __weak int eeprom_write_enable(unsigned dev_addr, int state)
  69 {
  70         return 0;
  71 }
  72
  73 void eeprom_init(int bus)
  74 {
  75         /* I2C EEPROM */
  76 #if defined(CONFIG_DM_I2C)
  77         eeprom_i2c_bus = bus;
  78 #elif defined(CONFIG_SYS_I2C)
  79         if (bus >= 0)
  80                 i2c_set_bus_num(bus);
  81         i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
  82 #endif
  83 }
  84
  85 static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
  86 {
  87         unsigned blk_off;
  88         int alen;
  89
  90         blk_off = offset & 0xff;        /* block offset */
  91 #if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
  92         addr[0] = offset >> 8;          /* block number */
  93         addr[1] = blk_off;              /* block offset */
  94         alen = 2;
  95 #else
  96         addr[0] = offset >> 16;         /* block number */
  97         addr[1] = offset >>  8;         /* upper address octet */
  98         addr[2] = blk_off;              /* lower address octet */
  99         alen = 3;
 100 #endif  /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
 101
 102         addr[0] |= dev_addr;            /* insert device address */
 103
 104         return alen;
 105 }
 106
 107 static int eeprom_len(unsigned offset, unsigned end)
 108 {
 109         unsigned len = end - offset;
 110
 111         /*
 112          * For a FRAM device there is no limit on the number of the
 113          * bytes that can be accessed with the single read or write
 114          * operation.
 115          */
 116 #if !defined(CONFIG_SYS_I2C_FRAM)
 117         unsigned blk_off = offset & 0xff;
 118         unsigned maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
 119
 120         if (maxlen > I2C_RXTX_LEN)
 121                 maxlen = I2C_RXTX_LEN;
 122
 123         if (len > maxlen)
 124                 len = maxlen;
 125 #endif
 126
 127         return len;
 128 }
 129
 130 static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
 131                            uchar *buffer, unsigned len, bool read)
 132 {
 133         int ret = 0;
 134
 135 #if defined(CONFIG_DM_I2C)
 136         struct udevice *dev;
 137
 138         ret = i2c_get_chip_for_busnum(eeprom_i2c_bus, addr[0],
 139                                       alen - 1, &dev);
 140         if (ret) {
 141                 printf("%s: Cannot find udev for a bus %d\n", __func__,
 142                        eeprom_i2c_bus);
 143                 return CMD_RET_FAILURE;
 144         }
 145
 146         if (read)
 147                 ret = dm_i2c_read(dev, offset, buffer, len);
 148         else
 149                 ret = dm_i2c_write(dev, offset, buffer, len);
 150
 151 #else /* Non DM I2C support - will be removed */
 152
 153         if (read)
 154                 ret = i2c_read(addr[0], offset, alen - 1, buffer, len);
 155         else
 156                 ret = i2c_write(addr[0], offset, alen - 1, buffer, len);
 157 #endif /* CONFIG_DM_I2C */
 158         if (ret)
 159                 ret = CMD_RET_FAILURE;
 160
 161         return ret;
 162 }
 163
 164 static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer,
 165                      unsigned cnt, bool read)
 166 {
 167         unsigned end = offset + cnt;
 168         unsigned alen, len;
 169         int rcode = 0;
 170         uchar addr[3];
 171
 172 #if defined(CONFIG_SYS_I2C_EEPROM_BUS)
 173         eeprom_init(CONFIG_SYS_I2C_EEPROM_BUS);
 174 #endif
 175
 176         while (offset < end) {
 177                 alen = eeprom_addr(dev_addr, offset, addr);
 178
 179                 len = eeprom_len(offset, end);
 180
 181                 rcode = eeprom_rw_block(offset, addr, alen, buffer, len, read);
 182
 183                 buffer += len;
 184                 offset += len;
 185
 186                 if (!read)
 187                         udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 188         }
 189
 190         return rcode;
 191 }
 192
 193 int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
 194 {
 195         /*
 196          * Read data until done or would cross a page boundary.
 197          * We must write the address again when changing pages
 198          * because the next page may be in a different device.
 199          */
 200         return eeprom_rw(dev_addr, offset, buffer, cnt, 1);
 201 }
 202
 203 int eeprom_write(unsigned dev_addr, unsigned offset,
 204                  uchar *buffer, unsigned cnt)
 205 {
 206         int ret;
 207
 208         eeprom_write_enable(dev_addr, 1);
 209
 210         /*
 211          * Write data until done or would cross a write page boundary.
 212          * We must write the address again when changing pages
 213          * because the address counter only increments within a page.
 214          */
 215         ret = eeprom_rw(dev_addr, offset, buffer, cnt, 0);
 216
 217         eeprom_write_enable(dev_addr, 0);
 218         return ret;
 219 }
 220
 221 static int parse_numeric_param(char *str)
 222 {
 223         char *endptr;
 224         int value = simple_strtol(str, &endptr, 16);
 225
 226         return (*endptr != '\0') ? -1 : value;
 227 }
 228
 229 /**
 230  * parse_i2c_bus_addr - parse the i2c bus and i2c devaddr parameters
 231  *
 232  * @i2c_bus:    address to store the i2c bus
 233  * @i2c_addr:   address to store the device i2c address
 234  * @argc:       count of command line arguments left to parse
 235  * @argv:       command line arguments left to parse
 236  * @argc_no_bus_addr:   argc value we expect to see when bus & addr aren't given
 237  *
 238  * @returns:    number of arguments parsed or CMD_RET_USAGE if error
 239  */
 240 static int parse_i2c_bus_addr(int *i2c_bus, ulong *i2c_addr, int argc,
 241                               char *const argv[], int argc_no_bus_addr)
 242 {
 243         int argc_no_bus = argc_no_bus_addr + 1;
 244         int argc_bus_addr = argc_no_bus_addr + 2;
 245
 246 #ifdef CONFIG_SYS_DEF_EEPROM_ADDR
 247         if (argc == argc_no_bus_addr) {
 248                 *i2c_bus = -1;
 249                 *i2c_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
 250
 251                 return 0;
 252         }
 253 #endif
 254         if (argc == argc_no_bus) {
 255                 *i2c_bus = -1;
 256                 *i2c_addr = parse_numeric_param(argv[0]);
 257
 258                 return 1;
 259         }
 260
 261         if (argc == argc_bus_addr) {
 262                 *i2c_bus = parse_numeric_param(argv[0]);
 263                 *i2c_addr = parse_numeric_param(argv[1]);
 264
 265                 return 2;
 266         }
 267
 268         return CMD_RET_USAGE;
 269 }
 270
 271 #ifdef CONFIG_CMD_EEPROM_LAYOUT
 272
 273 __weak int eeprom_parse_layout_version(char *str)
 274 {
 275         return LAYOUT_VERSION_UNRECOGNIZED;
 276 }
 277
 278 static unsigned char eeprom_buf[CONFIG_SYS_EEPROM_SIZE];
 279
 280 #endif
 281
 282 enum eeprom_action {
 283         EEPROM_READ,
 284         EEPROM_WRITE,
 285         EEPROM_PRINT,
 286         EEPROM_UPDATE,
 287         EEPROM_ACTION_INVALID,
 288 };
 289
 290 static enum eeprom_action parse_action(char *cmd)
 291 {
 292         if (!strncmp(cmd, "read", 4))
 293                 return EEPROM_READ;
 294         if (!strncmp(cmd, "write", 5))
 295                 return EEPROM_WRITE;
 296 #ifdef CONFIG_CMD_EEPROM_LAYOUT
 297         if (!strncmp(cmd, "print", 5))
 298                 return EEPROM_PRINT;
 299         if (!strncmp(cmd, "update", 6))
 300                 return EEPROM_UPDATE;
 301 #endif
 302
 303         return EEPROM_ACTION_INVALID;
 304 }
 305
 306 static int eeprom_execute_command(enum eeprom_action action, int i2c_bus,
 307                                   ulong i2c_addr, int layout_ver, char *key,
 308                                   char *value, ulong addr, ulong off, ulong cnt)
 309 {
 310         int rcode = 0;
 311         const char *const fmt =
 312                 "\nEEPROM @0x%lX %s: addr 0x%08lx  off 0x%04lx  count %ld ... ";
 313 #ifdef CONFIG_CMD_EEPROM_LAYOUT
 314         struct eeprom_layout layout;
 315 #endif
 316
 317         if (action == EEPROM_ACTION_INVALID)
 318                 return CMD_RET_USAGE;
 319
 320         eeprom_init(i2c_bus);
 321         if (action == EEPROM_READ) {
 322                 printf(fmt, i2c_addr, "read", addr, off, cnt);
 323
 324                 rcode = eeprom_read(i2c_addr, off, (uchar *)addr, cnt);
 325
 326                 puts("done\n");
 327                 return rcode;
 328         } else if (action == EEPROM_WRITE) {
 329                 printf(fmt, i2c_addr, "write", addr, off, cnt);
 330
 331                 rcode = eeprom_write(i2c_addr, off, (uchar *)addr, cnt);
 332
 333                 puts("done\n");
 334                 return rcode;
 335         }
 336
 337 #ifdef CONFIG_CMD_EEPROM_LAYOUT
 338         rcode = eeprom_read(i2c_addr, 0, eeprom_buf, CONFIG_SYS_EEPROM_SIZE);
 339         if (rcode < 0)
 340                 return rcode;
 341
 342         eeprom_layout_setup(&layout, eeprom_buf, CONFIG_SYS_EEPROM_SIZE,
 343                             layout_ver);
 344
 345         if (action == EEPROM_PRINT) {
 346                 layout.print(&layout);
 347                 return 0;
 348         }
 349
 350         layout.update(&layout, key, value);
 351
 352         rcode = eeprom_write(i2c_addr, 0, layout.data, CONFIG_SYS_EEPROM_SIZE);
 353 #endif
 354
 355         return rcode;
 356 }
 357
 358 #define NEXT_PARAM(argc, index) { (argc)--; (index)++; }
 359 int do_eeprom(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 360 {
 361         int layout_ver = LAYOUT_VERSION_AUTODETECT;
 362         enum eeprom_action action = EEPROM_ACTION_INVALID;
 363         int i2c_bus = -1, index = 0;
 364         ulong i2c_addr = -1, addr = 0, cnt = 0, off = 0;
 365         int ret;
 366         char *field_name = "";
 367         char *field_value = "";
 368
 369         if (argc <= 1)
 370                 return CMD_RET_USAGE;
 371
 372         NEXT_PARAM(argc, index); /* Skip program name */
 373
 374         action = parse_action(argv[index]);
 375         NEXT_PARAM(argc, index);
 376
 377         if (action == EEPROM_ACTION_INVALID)
 378                 return CMD_RET_USAGE;
 379
 380 #ifdef CONFIG_CMD_EEPROM_LAYOUT
 381         if (action == EEPROM_PRINT || action == EEPROM_UPDATE) {
 382                 if (!strcmp(argv[index], "-l")) {
 383                         NEXT_PARAM(argc, index);
 384                         layout_ver = eeprom_parse_layout_version(argv[index]);
 385                         NEXT_PARAM(argc, index);
 386                 }
 387         }
 388 #endif
 389
 390         switch (action) {
 391         case EEPROM_READ:
 392         case EEPROM_WRITE:
 393                 ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc,
 394                                          argv + index, 3);
 395                 break;
 396         case EEPROM_PRINT:
 397                 ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc,
 398                                          argv + index, 0);
 399                 break;
 400         case EEPROM_UPDATE:
 401                 ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc,
 402                                          argv + index, 2);
 403                 break;
 404         default:
 405                 /* Get compiler to stop whining */
 406                 return CMD_RET_USAGE;
 407         }
 408
 409         if (ret == CMD_RET_USAGE)
 410                 return ret;
 411
 412         while (ret--)
 413                 NEXT_PARAM(argc, index);
 414
 415         if (action == EEPROM_READ || action == EEPROM_WRITE) {
 416                 addr = parse_numeric_param(argv[index]);
 417                 NEXT_PARAM(argc, index);
 418                 off = parse_numeric_param(argv[index]);
 419                 NEXT_PARAM(argc, index);
 420                 cnt = parse_numeric_param(argv[index]);
 421         }
 422
 423 #ifdef CONFIG_CMD_EEPROM_LAYOUT
 424         if (action == EEPROM_UPDATE) {
 425                 field_name = argv[index];
 426                 NEXT_PARAM(argc, index);
 427                 field_value = argv[index];
 428                 NEXT_PARAM(argc, index);
 429         }
 430 #endif
 431
 432         return eeprom_execute_command(action, i2c_bus, i2c_addr, layout_ver,
 433                                       field_name, field_value, addr, off, cnt);
 434 }
 435
 436 U_BOOT_CMD(
 437         eeprom, 8,      1,      do_eeprom,
 438         "EEPROM sub-system",
 439         "read  <bus> <devaddr> addr off cnt\n"
 440         "eeprom write <bus> <devaddr> addr off cnt\n"
 441         "       - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'"
 442 #ifdef CONFIG_CMD_EEPROM_LAYOUT
 443         "\n"
 444         "eeprom print [-l <layout_version>] <bus> <devaddr>\n"
 445         "       - Print layout fields and their data in human readable format\n"
 446         "eeprom update [-l <layout_version>] <bus> <devaddr> field_name field_value\n"
 447         "       - Update a specific eeprom field with new data.\n"
 448         "         The new data must be written in the same human readable format as shown by the print command.\n"
 449         "\n"
 450         "LAYOUT VERSIONS\n"
 451         "The -l option can be used to force the command to interpret the EEPROM data using the chosen layout.\n"
 452         "If the -l option is omitted, the command will auto detect the layout based on the data in the EEPROM.\n"
 453         "The values which can be provided with the -l option are:\n"
 454         CONFIG_EEPROM_LAYOUT_HELP_STRING"\n"
 455 #endif
 456 )