cmd/date.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2001
   4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5  */
   6
   7 /*
   8  * RTC, Date & Time support: get and set date & time
   9  */
  10 #include <common.h>
  11 #include <command.h>
  12 #include <dm.h>
  13 #include <rtc.h>
  14 #include <i2c.h>
  15 #include <asm/global_data.h>
  16
  17 DECLARE_GLOBAL_DATA_PTR;
  18
  19 static const char * const weekdays[] = {
  20         "Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur",
  21 };
  22
  23 #ifdef CONFIG_NEEDS_MANUAL_RELOC
  24 #define RELOC(a)        ((typeof(a))((unsigned long)(a) + gd->reloc_off))
  25 #else
  26 #define RELOC(a)        a
  27 #endif
  28
  29 int mk_date (const char *, struct rtc_time *);
  30
  31 static struct rtc_time default_tm = { 0, 0, 0, 1, 1, 2000, 6, 0, 0 };
  32
  33 static int do_date(struct cmd_tbl *cmdtp, int flag, int argc,
  34                    char *const argv[])
  35 {
  36         struct rtc_time tm;
  37         int rcode = 0;
  38         int old_bus __maybe_unused;
  39
  40         /* switch to correct I2C bus */
  41 #ifdef CONFIG_DM_RTC
  42         struct udevice *dev;
  43
  44         rcode = uclass_get_device(UCLASS_RTC, 0, &dev);
  45         if (rcode) {
  46                 printf("Cannot find RTC: err=%d\n", rcode);
  47                 return CMD_RET_FAILURE;
  48         }
  49 #elif defined(CONFIG_SYS_I2C)
  50         old_bus = i2c_get_bus_num();
  51         i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
  52 #else
  53         old_bus = I2C_GET_BUS();
  54         I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM);
  55 #endif
  56
  57         switch (argc) {
  58         case 2:                 /* set date & time */
  59                 if (strcmp(argv[1],"reset") == 0) {
  60                         puts ("Reset RTC...\n");
  61 #ifdef CONFIG_DM_RTC
  62                         rcode = dm_rtc_reset(dev);
  63                         if (!rcode)
  64                                 rcode = dm_rtc_set(dev, &default_tm);
  65 #else
  66                         rtc_reset();
  67                         rcode = rtc_set(&default_tm);
  68 #endif
  69                         if (rcode)
  70                                 puts("## Failed to set date after RTC reset\n");
  71                 } else {
  72                         /* initialize tm with current time */
  73 #ifdef CONFIG_DM_RTC
  74                         rcode = dm_rtc_get(dev, &tm);
  75 #else
  76                         rcode = rtc_get(&tm);
  77 #endif
  78                         if (!rcode) {
  79                                 /* insert new date & time */
  80                                 if (mk_date(argv[1], &tm) != 0) {
  81                                         puts ("## Bad date format\n");
  82                                         break;
  83                                 }
  84                                 /* and write to RTC */
  85 #ifdef CONFIG_DM_RTC
  86                                 rcode = dm_rtc_set(dev, &tm);
  87 #else
  88                                 rcode = rtc_set(&tm);
  89 #endif
  90                                 if (rcode) {
  91                                         printf("## Set date failed: err=%d\n",
  92                                                rcode);
  93                                 }
  94                         } else {
  95                                 puts("## Get date failed\n");
  96                         }
  97                 }
  98                 /* FALL TROUGH */
  99         case 1:                 /* get date & time */
 100 #ifdef CONFIG_DM_RTC
 101                 rcode = dm_rtc_get(dev, &tm);
 102 #else
 103                 rcode = rtc_get(&tm);
 104 #endif
 105                 if (rcode) {
 106                         puts("## Get date failed\n");
 107                         break;
 108                 }
 109
 110                 printf ("Date: %4d-%02d-%02d (%sday)    Time: %2d:%02d:%02d\n",
 111                         tm.tm_year, tm.tm_mon, tm.tm_mday,
 112                         (tm.tm_wday<0 || tm.tm_wday>6) ?
 113                                 "unknown " : RELOC(weekdays[tm.tm_wday]),
 114                         tm.tm_hour, tm.tm_min, tm.tm_sec);
 115
 116                 break;
 117         default:
 118                 rcode = CMD_RET_USAGE;
 119         }
 120
 121         /* switch back to original I2C bus */
 122 #ifdef CONFIG_SYS_I2C
 123         i2c_set_bus_num(old_bus);
 124 #elif !defined(CONFIG_DM_RTC)
 125         I2C_SET_BUS(old_bus);
 126 #endif
 127
 128         return rcode ? CMD_RET_FAILURE : 0;
 129 }
 130
 131 /*
 132  * simple conversion of two-digit string with error checking
 133  */
 134 static int cnvrt2 (const char *str, int *valp)
 135 {
 136         int val;
 137
 138         if ((*str < '0') || (*str > '9'))
 139                 return (-1);
 140
 141         val = *str - '0';
 142
 143         ++str;
 144
 145         if ((*str < '0') || (*str > '9'))
 146                 return (-1);
 147
 148         *valp = 10 * val + (*str - '0');
 149
 150         return (0);
 151 }
 152
 153 /*
 154  * Convert date string: MMDDhhmm[[CC]YY][.ss]
 155  *
 156  * Some basic checking for valid values is done, but this will not catch
 157  * all possible error conditions.
 158  */
 159 int mk_date (const char *datestr, struct rtc_time *tmp)
 160 {
 161         int len, val;
 162         char *ptr;
 163
 164         ptr = strchr(datestr, '.');
 165         len = strlen(datestr);
 166
 167         /* Set seconds */
 168         if (ptr) {
 169                 int sec;
 170
 171                 ptr++;
 172                 if ((len - (ptr - datestr)) != 2)
 173                         return (-1);
 174
 175                 len -= 3;
 176
 177                 if (cnvrt2 (ptr, &sec))
 178                         return (-1);
 179
 180                 tmp->tm_sec = sec;
 181         } else {
 182                 tmp->tm_sec = 0;
 183         }
 184
 185         if (len == 12) {                /* MMDDhhmmCCYY */
 186                 int year, century;
 187
 188                 if (cnvrt2 (datestr+ 8, &century) ||
 189                     cnvrt2 (datestr+10, &year) ) {
 190                         return (-1);
 191                 }
 192                 tmp->tm_year = 100 * century + year;
 193         } else if (len == 10) {         /* MMDDhhmmYY   */
 194                 int year, century;
 195
 196                 century = tmp->tm_year / 100;
 197                 if (cnvrt2 (datestr+ 8, &year))
 198                         return (-1);
 199                 tmp->tm_year = 100 * century + year;
 200         }
 201
 202         switch (len) {
 203         case 8:                 /* MMDDhhmm     */
 204                 /* fall thru */
 205         case 10:                /* MMDDhhmmYY   */
 206                 /* fall thru */
 207         case 12:                /* MMDDhhmmCCYY */
 208                 if (cnvrt2 (datestr+0, &val) ||
 209                     val > 12) {
 210                         break;
 211                 }
 212                 tmp->tm_mon  = val;
 213                 if (cnvrt2 (datestr+2, &val) ||
 214                     val > ((tmp->tm_mon==2) ? 29 : 31)) {
 215                         break;
 216                 }
 217                 tmp->tm_mday = val;
 218
 219                 if (cnvrt2 (datestr+4, &val) ||
 220                     val > 23) {
 221                         break;
 222                 }
 223                 tmp->tm_hour = val;
 224
 225                 if (cnvrt2 (datestr+6, &val) ||
 226                     val > 59) {
 227                         break;
 228                 }
 229                 tmp->tm_min  = val;
 230
 231                 /* calculate day of week */
 232                 rtc_calc_weekday(tmp);
 233
 234                 return (0);
 235         default:
 236                 break;
 237         }
 238
 239         return (-1);
 240 }
 241
 242 /***************************************************/
 243
 244 U_BOOT_CMD(
 245         date,   2,      1,      do_date,
 246         "get/set/reset date & time",
 247         "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
 248         "  - without arguments: print date & time\n"
 249         "  - with numeric argument: set the system date & time\n"
 250         "  - with 'reset' argument: reset the RTC"
 251 );