bus/Makefile.am

   1 configdir=$(sysconfdir)/dbus-1
   2 dbus_daemon_execdir = $(DBUS_DAEMONDIR)
   3
   4 INCLUDES=-I$(top_srcdir) $(DBUS_BUS_CFLAGS) @PIE_CFLAGS@                \
   5         -DDBUS_SYSTEM_CONFIG_FILE=\""$(configdir)/system.conf"\"        \
   6         -DDBUS_COMPILATION
   7
   8 EFENCE=
   9
  10 CONFIG_IN_FILES=                                \
  11         session.conf.in                         \
  12         system.conf.in                          \
  13         org.freedesktop.dbus-session.plist.in
  14
  15 config_DATA=                                    \
  16         session.conf                            \
  17         system.conf
  18
  19 if DBUS_ENABLE_LAUNCHD
  20 agentdir=$(LAUNCHD_AGENT_DIR)
  21 agent_DATA=org.freedesktop.dbus-session.plist
  22 endif
  23
  24 if DBUS_USE_LIBXML
  25 XML_SOURCES=config-loader-libxml.c
  26 endif
  27 if DBUS_USE_EXPAT
  28 XML_SOURCES=config-loader-expat.c
  29 endif
  30
  31 if DBUS_BUS_ENABLE_KQUEUE
  32 DIR_WATCH_SOURCE=dir-watch-kqueue.c
  33 else
  34 if DBUS_BUS_ENABLE_INOTIFY
  35 DIR_WATCH_SOURCE=dir-watch-inotify.c
  36 else
  37 if DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX
  38 DIR_WATCH_SOURCE=dir-watch-dnotify.c
  39 else
  40 DIR_WATCH_SOURCE=dir-watch-default.c
  41 endif
  42 endif
  43 endif
  44
  45 BUS_SOURCES=                                    \
  46         activation.c                            \
  47         activation.h                            \
  48         activation-exit-codes.h                 \
  49         bus.c                                   \
  50         bus.h                                   \
  51         config-parser.c                         \
  52         config-parser.h                         \
  53         config-parser-common.c                  \
  54         config-parser-common.h                  \
  55         connection.c                            \
  56         connection.h                            \
  57         desktop-file.c                          \
  58         desktop-file.h                          \
  59         $(DIR_WATCH_SOURCE)                     \
  60         dir-watch.h                             \
  61         dispatch.c                              \
  62         dispatch.h                              \
  63         driver.c                                \
  64         driver.h                                \
  65         expirelist.c                            \
  66         expirelist.h                            \
  67         policy.c                                \
  68         policy.h                                \
  69         selinux.h                               \
  70         selinux.c                               \
  71         services.c                              \
  72         services.h                              \
  73         signals.c                               \
  74         signals.h                               \
  75         test.c                                  \
  76         test.h                                  \
  77         utils.c                                 \
  78         utils.h                                 \
  79         $(XML_SOURCES)
  80
  81 dbus_daemon_SOURCES=                            \
  82         $(BUS_SOURCES)                          \
  83         main.c
  84
  85 dbus_daemon_CPPFLAGS = -DDBUS_STATIC_BUILD
  86 dbus_daemon_LDADD=                                      \
  87         $(top_builddir)/dbus/libdbus-internal.la        \
  88         $(EFENCE)                                       \
  89         $(DBUS_BUS_LIBS)
  90
  91 dbus_daemon_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@ @PIE_LDFLAGS@
  92
  93 LAUNCH_HELPER_SOURCES=                          \
  94         $(XML_SOURCES)                          \
  95         config-parser-common.c                  \
  96         config-parser-common.h                  \
  97         config-parser-trivial.c                 \
  98         config-parser-trivial.h                 \
  99         desktop-file.c                          \
 100         desktop-file.h                          \
 101         utils.c                                 \
 102         utils.h                                 \
 103         activation-exit-codes.h                 \
 104         activation-helper.h                     \
 105         activation-helper.c
 106
 107 ## This is the installed launch helper with the setuid checks
 108 dbus_daemon_launch_helper_SOURCES=              \
 109         activation-helper-bin.c                 \
 110         $(LAUNCH_HELPER_SOURCES)
 111
 112 dbus_daemon_launch_helper_CPPFLAGS = -DDBUS_STATIC_BUILD
 113 dbus_daemon_launch_helper_LDADD=                \
 114         $(top_builddir)/dbus/libdbus-internal.la \
 115         $(DBUS_LAUNCHER_LIBS)
 116
 117 dbus_daemon_launch_helper_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@
 118
 119 ## we build another binary so we can do the launch testing without root privs.
 120 ## DO NOT INSTALL THIS FILE
 121 dbus_daemon_launch_helper_test_SOURCES=         \
 122         activation-helper-bin.c                 \
 123         $(LAUNCH_HELPER_SOURCES)
 124
 125 dbus_daemon_launch_helper_test_LDADD=           \
 126         $(top_builddir)/dbus/libdbus-internal.la \
 127         $(DBUS_LAUNCHER_LIBS)
 128
 129 dbus_daemon_launch_helper_test_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@
 130 dbus_daemon_launch_helper_test_CPPFLAGS= -DDBUS_STATIC_BUILD    \
 131         -DACTIVATION_LAUNCHER_TEST
 132
 133 ## we build yet another binary so we can do the OOM tests
 134 ## DO NOT INSTALL THIS FILE
 135 bus_test_launch_helper_SOURCES=         \
 136         test-launch-helper.c            \
 137         $(LAUNCH_HELPER_SOURCES)
 138
 139 bus_test_launch_helper_LDADD=           \
 140         $(top_builddir)/dbus/libdbus-internal.la \
 141         $(DBUS_LAUNCHER_LIBS)
 142
 143 bus_test_launch_helper_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@
 144 bus_test_launch_helper_CPPFLAGS= -DDBUS_STATIC_BUILD    \
 145         -DACTIVATION_LAUNCHER_TEST      \
 146         -DACTIVATION_LAUNCHER_DO_OOM
 147
 148 ## we use noinst_PROGRAMS not check_PROGRAMS so that we build
 149 ## even when not doing "make check"
 150 noinst_PROGRAMS = $(TESTS)
 151 dbus_daemon_exec_PROGRAMS = dbus-daemon
 152 libexec_PROGRAMS = dbus-daemon-launch-helper
 153
 154 ## note that TESTS has special meaning (stuff to use in make check)
 155 ## so if adding tests not to be run in make check, don't add them to
 156 ## TESTS
 157 TESTS =
 158
 159 if DBUS_BUILD_TESTS
 160 TESTS_ENVIRONMENT=DBUS_TEST_DATA=$(top_builddir)/test/data DBUS_TEST_HOMEDIR=$(top_builddir)/dbus DBUS_FATAL_WARNINGS=1 DBUS_BLOCK_ON_ABORT=1
 161 TESTS += bus-test bus-test-system
 162
 163 if DBUS_UNIX
 164 TESTS += bus-test-launch-helper
 165 # this is used by the tests but is not,itself, a test
 166 noinst_PROGRAMS += dbus-daemon-launch-helper-test
 167 endif DBUS_UNIX
 168
 169 endif DBUS_BUILD_TESTS
 170
 171 bus_test_system_SOURCES=                        \
 172         $(XML_SOURCES)                          \
 173         config-parser-common.c                  \
 174         config-parser-common.h                  \
 175         config-parser-trivial.c                 \
 176         config-parser-trivial.h                 \
 177         utils.c                                 \
 178         utils.h                                 \
 179         test-system.c
 180
 181 bus_test_system_CPPFLAGS = -DDBUS_STATIC_BUILD
 182 bus_test_system_LDADD=$(top_builddir)/dbus/libdbus-internal.la $(DBUS_BUS_LIBS)
 183 bus_test_system_LDFLAGS=@R_DYNAMIC_LDFLAG@
 184
 185 bus_test_SOURCES=                               \
 186         $(BUS_SOURCES)                          \
 187         test-main.c
 188
 189 bus_test_CPPFLAGS = -DDBUS_STATIC_BUILD
 190 bus_test_LDADD=$(top_builddir)/dbus/libdbus-internal.la $(DBUS_BUS_LIBS)
 191 bus_test_LDFLAGS=@R_DYNAMIC_LDFLAG@
 192
 193 ## mop up the gcov files
 194 clean-local:
 195         /bin/rm *.bb *.bbg *.da *.gcov || true
 196
 197 install-data-hook:
 198         $(mkinstalldirs) $(DESTDIR)$(localstatedir)/run/dbus
 199         $(mkinstalldirs) $(DESTDIR)$(configdir)/system.d
 200         $(mkinstalldirs) $(DESTDIR)$(configdir)/session.d
 201         $(mkinstalldirs) $(DESTDIR)$(datadir)/dbus-1/services
 202         $(mkinstalldirs) $(DESTDIR)$(datadir)/dbus-1/system-services
 203 if HAVE_SYSTEMD
 204 # Install dbus.socket as default implementation of a D-Bus stack
 205         $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants
 206         $(LN_S) ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants/dbus.socket
 207 # Unconditionally enable D-Bus on systemd installations
 208         $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants
 209         $(LN_S) ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants/dbus.socket
 210         $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants
 211         $(LN_S) ../dbus.service $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants/dbus.service
 212 endif
 213
 214 if DBUS_UNIX
 215 install-exec-hook:
 216         if test `id -u` -eq 0; then \
 217                 chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
 218                 chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
 219         else \
 220                 echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \
 221                 echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \
 222         fi
 223 endif
 224
 225 #### Init scripts fun
 226 SCRIPT_IN_FILES=messagebus.in \
 227                 messagebus-config.in \
 228                 rc.messagebus.in
 229
 230 ## Red Hat start
 231 if DBUS_INIT_SCRIPTS_RED_HAT
 232
 233 initddir=$(sysconfdir)/rc.d/init.d
 234
 235 initd_SCRIPTS=  \
 236         messagebus
 237
 238 endif
 239  ## Red Hat end
 240
 241 ## Slackware start
 242 if DBUS_INIT_SCRIPTS_SLACKWARE
 243
 244 initddir=$(sysconfdir)/rc.d/
 245
 246 initd_SCRIPTS=  \
 247         rc.messagebus
 248
 249 endif
 250 ## Slackware end
 251
 252 ## Cygwin start
 253 if DBUS_INIT_SCRIPTS_CYGWIN
 254
 255 bin_SCRIPTS=    \
 256         messagebus-config
 257
 258 endif
 259 ## Cygwin end
 260
 261 if HAVE_SYSTEMD
 262 SCRIPT_IN_FILES += \
 263         dbus.service.in \
 264         dbus.socket.in
 265
 266 systemdsystemunit_DATA = \
 267         dbus.service \
 268         dbus.socket
 269 endif
 270
 271 #### Extra dist
 272
 273 EXTRA_DIST=$(CONFIG_IN_FILES) $(SCRIPT_IN_FILES)